Hoops: In the sewing accessory part of the fabric stores, you will find horsehair braid, used in real size garments, for making hems stand out. You can dye it and it is good for a lot of things - hats for one. Charlean |
Hoop skirt: Use the white thread covered wire available from DIY florist supplies. If you are unable to buy this in your neck of the woods, I'd be very happy to send some to you. You glue it to the inside lower edge of the petticoat or skirt. In the case of the petticoat,it can be glued to the right side, depending on how you want the end product to be formed. With the wire attached, you can shape the skirt/petticoat into nice folds. Can be used in many circles from top to bottom of petticoat - with an even distance BTW the circles. This method (gluing wire) can be used in any length fairly full skirt. Elise |
Witch Doll Kit: Have you ever seen Dolls & Miniatures magazine? It comes out 4 times a year and is published by Viola Williams & Laura Johnson. It's a nice magazine for miniature enthusiasts of all levels of expertise, with lots of tips on creating and also show and tell type articles and not too expensive! You might find someone who does kits in there. The address is 1040 Bentoak Lane, San Jose, CA 95129 to inquire about subscriptions. Betti from MS |
Glue in Doll’s Hair: I would remove the hair as well and re-wig the doll. If you don't want to do that, could you replace the hat with a better one covering the glue mark? One more idea, if you don't want hat on her at all...you could make curls to cover the glue spots or pull some of the existing hair up and over the glue but this time take some thread that matches the hair color and SEW the hair into place. Sewing acts like miniature hair pins to secure the hair. Tip: When you use glue on hair... never push down with your finger...use toothpick large needle, or other pointed tool, as it leaves a glue mark. Always use a thick, white, tacky glue that says for use with fabrics because it will be flexible and clear when dry. Laurie Sisson |
Raggedy Ann stripes: The easiest way to make those striped stocking legs for the Raggedy Ann doll is to wrap red and then white cotton alternately around your leg wires. This gives the red and white striped stockings look. The best way to wrap without threads coming loose is to whip it, but my powers of description are not up to explaining how to whip rope, without a diagram. Find a sailor or a boy scout and ask them for a demonstration of whipping. Otherwise just glue the threads as you go along. Barbara B |
Raggedy Ann stripes: I use different red/white bands of bunka around my Raggedy Dolls legs for the effect of the stockings.....and it looks really cute! Wolfie |
Doll Wigging: Speaking of doll wig glues - I use Aleene's Tacky as often as not. If you want to make a removeable wig, or if you are nervous about how the wig will turn out, you should use a square of cling film about 6"x6". Place the middle of the film on the top of the doll's bald head, smooth the film down tightly and tie it around the neck with a pipe cleaner. Now make your wig. When it has dried a bit - not too early! - undo the pipe cleaner and remove the film and wig from the head. Let dry really well, then carefully ease and pull the film out of the wig. You *must* use Tacky glue for this process. I used to use this method to make doll wigs for sale. However, there are so many sizes of doll heads, so many colours of hair, so many styles, that I gave up making wigs. Now I sell a wig kit which seems to do the trick. Joy Parker |
Animal Dolls: Leslie Frick was profiled in the Summer 00 issue of "Dolls & Miniatures" magazine and her work (all kind of animals) is out of this world!! She can be contacted at 25996 Balsam, Franklin, MI 48025. Please mention the "D&M" article if you write to her... and if you can find a copy of that issue, be sure to look up her work because you'll be very impressed, I'm sure. Viola Williams |
Broken Limbs - I have had great results in gluing porcelain limbs back together, that customers have broken on their dolls, using Qwik Grab. Just a very thin coating, put the two parts together pull apart, put together etc, until it starts grabbing and then take a fine blade knife and trim away any excess after it had dried overnight. Sylvia in Big D |
Make a policeman's hat. (Works for any uniform hat) Using one of those round, metal edged key tags (the ones with a paper middle) stretch the appropriate color of felt over it, and secure tightly with a rubber band, easing out al the folds. Soak with Stiffy. When dry, cut away the head hole on the side where the excess felt was in rubber band. Make hatband by gluing a strip of felt to paper and glue to hat top. Make brim from tape from a Dymo Label maker tape. You will need to coat edge of felt with tacky glue and then attach the brim with cyanoacrylate (super) glue. Decorate with a little emblem. Alice Zinn |
| Previous 10 | Next 10 Page 881 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |