Susan Scogin dolls: If you want to check out www.miniworld.com/house/ they have Susan Scogin dolls.

Val


Altoids boxes:  Altoids boxes were used as tabletops in 50s style kitchens.

     BTW, the "Wireless" Winter Clearance catalogue has a lot of 50s goodies in it, including radios, kitchen items, and a whole bunch of vintage candies. They are on-line at www.WirelessToo.com

Dani, in Bradshaw, MD


Feather Bed: I wanted a feather bed for my country house so I just measured the bed, made a pocket out of muslin and stuff it with a huge amount of white feathers that I picked up @ Wal-Mart. I found the best way was to strip the feathers into a bowl until you have the amount you want and then start stuffing. Of course, if you have allergies (which my DH does) or cats ( I have two, the pesky beasts!!)  then it might be a problem but mine came out great!!

Beth in TX


Glazing Legs for Miniature Dolls: Years ago, when we used to glaze/paint shoes or boots on all our doll kits, we used to do about 500 to 1,000 legs at a time, so we needed a fast and easy way to hold the legs while they were firing.

We tried making our own stilts with clay and nichrome wire, and they worked fine, but took up too much space in the kiln. What I ended up doing was carving out the middle of a fire brick - to make it like a box without a lid and filling the brick with silica sand. We then glazed the foot, just pushed the unglazed top of the leg into the sand, put the brick in the kiln, and fired. It worked wonderfully well. But keep the walls of the brick about 1" thick or it will eventually crack.

This gets around the problem that might occur when the hole in the leg is not large enough to go over the stilt wire.

Joy Parker, Swallowhill


Moleskin: I use moleskin mainly for my larger dolls. I place it on the neck section of the shoulder plate so that after the head of the doll is attached, the porcelain parts do not "grind" together. Have you ever heard porcelain parts grinding together? Usually it is a squeaky sound noticed when moving doll's arms up and down.

Carol Griffith


Wings for Dolls: A couple of years ago we had a lot of cicadas in the area. I still have a few cicada wings. You are welcome to try them if you are interested.

Juanita Sellers


Wing Ideas: I made a fairy doll for a friend once. I made the body of the doll in Fimo and then made the wings from micro glass which Dad had had in the shed for yonks. Cut the glass into pieces and copper foiled the pieces into wings. I painted the copper strips with patina to make the lines black. The micro glass was just clear so then I got the glass paints out and painted between the copper lines with irridescent paint and to finish off used a bit of that florists' spray with the ultra fine glitter in it. The doll was sitting, however, so the wings just sort of helped hold her up in the right position. Being microglass, they weren't all that heavy, although for a standing doll it might be just too much.

Tracey Joy


Butterfly or Fairy Wings: Have you thought about using the method of printing onto acetate, as many people do for leadlight windows? I figure you can draw what you want your wings to look like (you only need to draw one), scan them into the PC, print a pair onto acetate and then use glass paints or Jo Sonja's Translucent Acrylics to add some colour. Alternatively print them in colour in the first place.

Tracey Joy


Wings: To make your own, get a GOOD picture of the butterfly you want, take it to your local copy center and they can enlarge/reduce to your needs. Once it is right, copy it onto a transparency.

Sue Thwaite


Ghostly Girl: Just a quick note about the ghostly girl. Idea: Put her in a very dark corner. Take a slide transparency of an appropriate little girl. These can be done at a photo shop, or made at a copy shop with a color copier, although the color on these wouldn't be as dark or rich. (Maybe that would be a plus?) Blacken the entire area around the girl with India ink and brush, or black paint. Now you've got a picture that light will go through, and there's nothing but black around her. Put her in a dark corner with a dim light behind her...not just the bare bulb, but with a bit of tape, paper, or something else to diffuse the light a bit. You can add a little curl to the picture, (vertically, not horizontally) by either making a bent "frame" out of black cardboard, or by simply putting clear tape on top and bottom, from one side to the other, but only holding at the end. (Imagine the tape is a bow string, and the slide is the bow...) That would give it a little more roundness to the viewer.

Dave Pierce


Previous 10 | Next 10


Page 885 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)