Scale and Proportion: I think all things in real life aren't equal. :-) When you scale me down to 1/12th I would look ridiculous in a dollhouse (more like 1/10th than 1/12th scale). :-)

Just measuring doesn't always help, as you said. There's the mass, the proportion, the detail of a piece. What would work in one setting won't work in another. A perfect 1/12 copy of a vase in a monumental hall in a big old house will look out of scale in the hall of the average Greenleaf. :-) There are some cases where a slightly out-of-scale item actually looks better than a perfectly scaled piece. All tables are roughly the same height, but in real life you have dainty tables and tables with course, fat legs, too.

A table that's slightly too big might look just perfect in a log cabin.

I usually just see if something 'looks right'. When I doubt, I take a photograph. Usually stuff shows up on photographs that you don't see when you're working on something.

Karin Langeveld


Decorative Metal Beds: I very highly recommend Alan Hamer for your bed. He's absolutely awesome. He makes "combination" beds of brass *and* wrought iron. The iron is a detailed grape vine effect that wraps around the bedposts. Beautiful!

Dave Pierce


Scale and Proportion: Most dollhouses are not to scale. We (designers) typically use 9" to 10" ceilings. Modern houses are 7.5' to 8', Victorian were 9' to 13', colonial were 6' to 8'. We make them taller so its easier to see into the rooms and to work in the rooms. Front to back we tend to use 12" to 16" which should be 12" to 14" more typically. Width we use 8" to 12" to keep the houses from becoming unwieldy, 12" to 16" would be better. The diecut people (Greenleaf, Corona, Artply, etc) use even smaller dimensions for their rooms (6" and 8" are common), thereby making true 1" scale furnishings look too large.

Most dollhouse furnishers/collectors put too much into their dollhouses, making the rooms look small and the furniture large. Hey, but what the heck, its all for fun anyway so do what you like. Rather than worry about absolute scale, life will be much easier if you just make it look right.

Tom Berkner


Loom Plans: For loom plans, try http://www.halfwaytree.com/looms/loom2.html

Bonni Backe


Rustic furniture: Check out this site by Bev Michie for rustic furniture. Her work is amazing. She specializes in rustic. bmichie@yeoldouthouse.com

Debi


1930's Kitchen Sink: If you are thinking of the old enamelled Cast iron sinks they are easy to make and are really believable.

First build a shallow box the size of the sink from 1/16" or 1/8" basswood. On the top edge of the box (sink) glue 3/32" x 1/16" edging flat down all around the top edge. The edge should hang over the outside of the box. Round off the last strip to form a half round top.

As it is now the bottom of the box and the sides form a sharp angles where they meet. These corners need to be filled and rounded off. This is done by smoothing in some spackle in the corners and bottom joints. When the spackle is dried sand smooth to form rounded side and bottom corners. Seal the wood surfaces with a sealer and let dry well. I prefer black or charcoal, flat auto primer. Sand smooth and respray and sand until a nice base is built up. Use 400 followed by 600 wet or dry paper and use it wet after the wood is covered well. Then start spraying with flat white enamel or primer. Do not spray too heavy. Let dry well and then sand between each coat until it builds up a nice smooth finish.

Now you can go over it with a couple of coats of semi gloss or gloss enamel, depending on the finish you want. The reason flat is used first is that it sands easier. Gloss or semi gloss does not sand well.

To make the sink drain glue in a brass # 2-56 washer (found at model rail road store) Or a new shoe lace eye found at leather store. The sink can now be aged if you wish. Sand the bottom with fine paper until the flat paint shows through. Do the same on spots where you would expect normal wear.

If you are careful you can use a sharp knife blade to chip away some of the paint to show the black primer just as the old sinks looked when the enamel was chipped.

You can make a very weak (as weak as possible) wash of sienna and umber acrylic paint to coat the inside with. Apply and wipe away immediately. Add more coats as needed. This, if done correctly, will give a rust look around the drain and some of the scratches.

Bill Hudson


Bakery Display Unit: I found a site with plans for a store display http://pages.ivillage.com/misc/carlyn98/

nursemini


Scale: Part of my job is determining whether samples we get for the catalog are proper scale and I always translate the inches into feet to see if the item would be appropriate in full-scale. But that doesn't mean that all 1/12th items will look right in all settings. In full-scale, hutches, for instance, come in different heights and widths; some are 5' tall, others are 7' tall. The big ones look great in large dining rooms with high ceilings and loom like monsters in a small apartment breakfast nook. This is true in dollhouses and room boxes, too. A piece could be a perfectly scaled replica of Chippendale hutch and still be too large for one of the little Greenleaf cottages...

Sometimes, a piece is right in all its measurements but still looks "wrong."

In translating full-scale into miniature, it is sometimes better to go slightly smaller than the real thing. I am thinking of the hands and feet on dolls. I made a doll with hands and feet that were true in scale but they looked too big.

Sally Cook-Thomas


Twig Furniture: I made some -- more along rustic fairy lines rather than cabin -- which are on my Northwest Naturals pages. I don't sell them anymore, but you may get some ideas looking at the pictures. http://gerdesdesign.com/northwest.htm Also, Wee Darlings makes great miniature twig furniture: http://www.weedarlings.com

And, here are some URLs to BIG 'twig' furniture sites that should give you some design ideas:

http://www.donnellydesigns.com/
http://www.livingcountry.com/cabinout.htm
http://www.kauffmanwood.com/
http://www.lodgecreations.com/
http://www.greensmill.com/
http://www.moms-place.com/
http://www.brightdesigns.com/

Anne Gerdes


Twig Furniture: Kathy wrote the following, and I agree! I have the same kit Carole is building (RGT Adirondack, still in the box), and Carole has been so generous about sharing pictures and suggestions. Kathy, my experience with twig furnishings is quite limited! But at Kentucky State Day last year, we built a log cabin. When I got it home, I had a great time just breaking twigs and sticks off shrubs in the yard (yes, unfortunately with the dry weather, they needed pruning out anyway). Being in Kentucky and having access to many "rustic" sites, keep in mind that the pioneers built things to be functional, not decorative. Use those knotty pieces of branch to show the trim spots, don't hide them! Also, Anne Gerdes' page has wonderful ideas for using natural items in a scene. I'd enjoy hearing about your progress!

Paula


Previous 10 | Next 10


Page 891 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)