Screens: There is a super book called "Dolls' House Needlecrafts," by Venus Dodge that has the best, easy to follow directions on how to make a screen like you described. The hinges are done with ribbon.

Leslie


Scale/Perspective: One thing that I haven't heard anyone talk about is the fact of perspective. We are, in fact, creating a picture ... with perspective! (hopefully)! I do a lot of kit bashing so that the houses have more room, look more architecturally correct, etc and also fit into the customs of the day. I had done this with my NEWPORT and obtained a very large dining room with enough room to put a music room for the entertainment of the dinner guests but the only piano I had that would look right (and it had to be a grand, of course) looked smaller than my 5 ft. harpsichord ... but when it was put into the far side of the room complete with a smaller that 1" singer the room took on a whole new perspective looking about 10' deeper than it was!

By the way, on the Victorian grand that we made at the Partelow workshop he intentionally makes it less than 1" scale as to be accurate would make it look like a monster (which they usually are anyway) taking up the entire room. A grand piano is 5' wide and anywhere from 4 1/2' to 9' long and an upright has the same keyboard measurement with anywhere from 39" to 60" in height...and I thought square grands would solve the problem but they are 7-8Ft long and 4' deep (so much for theories). So what really counts is "does it look right?"

Ana Gerard


Screen: Draw a rather simple arched or other design on 1/16" basswood. Carefully cut out with your Exacto blade (will take some time to do it carefully). Then use a file or sandpaper to complete the shape you're trying for. After you get it the way you want (for a 3 section screen this would be 6 pieces), place the top part back onto your basswood and with a sharp pencil, draw the top shape and the top outside edges (or as far as you want your design to go). Remove your "pattern," and draw another line below what you've just drawn. This is what you will cut out. Just the little top piece. When you get it cut out, and sanded to fit the base piece, sand the edges rounded. This will give you, not a carved out design, but a built up design. You could also choose VERY small findings to gently hammer into this piece for a carved out look. This piece will be glued on top of the base and will look fancier than just a plain edge. This is to be repeated twice for each section of the screen (your screen will not be 1/8" thick wood, but 2 pieces of 1/16" glued together).

As for your hinges, I would use fabric for the hinges. No one will notice that you don't have metal hinges since it will be standing zig zag. Once you have finished all pieces of the wood, cut strong, thin fabric (silk, etc. I have used the net that is the base for clay bricks when you buy them) and glue ½ of this fabric/net on the inside of one side (do both edges for your folding screen to zig/zag). Then glue the top wood piece onto that fabric. Let dry and hold the next section close to, but not flush with the completed section. Work it back and forth to see how much fabric is the minimum you can get by with and still have a working screen. Mark the fabric and cut allowing an edge to glue inside the next section. Repeat this until you have all sections done. Then complete your decorating as you desire.

Rita Pierce


1/2" Scale Furniture: Heaven knows it's not the best quality in the world, but a lot of the stuff in the various dollar stores is half-scale and if you are on a budget, it is cheap. You need to pick and choose very carefully, and use fingernail polish remover or sandpaper to remove at least some of the varnish.

I have actually gotten some of this stuff without any finish and could do it any way I liked. I got a wooden bathroom set that was a bit iffy (then found a nicer plastic set closer to scale) The wooden bathtub is going to be a bookcase, two other pieces became workbenches in the shed.The sink/vanity became a computer desk. The only thing I didn't use was the toilet itself. One of these wooden sets cost me A$2.50 – that would be US$1.50

Charlene


Screens: If you are making screens, this is how I do it. Cut out your cardboard shapes, i.e. if you are making a 3-fold screen, then you cut out 6 pieces of cardboard. You cover each piece of cardboard with the fabric you desire, silk, small print, etc. stretching the fabric over the cardboard, ensuring you cover the corners correctly, and glue in place. You then actually glue the covered pieces together ensuring that the overlapped sections face each other. I always used paper clips to hold it in place and even press them between heavy books. Then using a fine braid, glue braid around the edge.

To join the 3 screen together, I find the best way to do this is to actually sew it in place. Like 3 imitation hinges. Don't sew all the way down, do about 4 oversewing stitches, in 3 sections. Don’t pull the threads tightly otherwise it won't bend. You will end up with a lovely screen this way.

Make sure you create your master template first, and also when you have done 3 panels, ensure that you flip your template over and then do the other 3, otherwise you wont have them fitting each other. This is much better way than wood, unless you are decoupaging.

Pauline Mackenzie


Screens: I made a 'lazy mans' screen from the rubber matting on shelf paper and bamboo skewers. I wanted the top of the shelf paper for a different project but didn't like the thickness so just peeled the backing off. Looks like rubber lace. I cut it to the size I wanted, glued the cut to size skewers point up into a square with feet. Made 4 squares and glued them to one side of the rubber material with the width of a skewer apart. After that dried I bent the thing how I wanted it, placed a small piece of skewer on the opposite side of the material and glued it in place. If the bend is going backward so the 2 skewer squares meet, just glue them together. I took some pictures and used thin wire to hang them on this screen. This would make a contemporary screen or a Victorian one depending on how you decorate it. Screens did have lace or material on them at that time.

Carol (jody)


Repairing Roll Top Desk: The slats on our roll top desks are glued onto "brown" cotton blend backing. The fabric should be lightweight. Use Elmer's wood glue. Once the glue is thoroughly dry , work the slats in your hand until the piece is very flexible. Then reinstall.

Sharon Stockton


Upholstered Furniture: Check out sdk miniatures. Furniture comes in 1 inch and 1/2 inch scales and sure looks comfy to me! Susan is a member of SS and her site is on the Small Stuff links page under furniture. Her potted plants are beautiful and she delivers quicker that you would think possible.

Linda


Regarding the miniatures that are too large for 1" scale, I set up a special display that has large scale items and they seem to look in scale when grouped together. Most of these things are from people who mean well and get me miniatures as gifts. So when they see how I've used them with other items they are never the wiser as to the scale.

Terri Young


Fernwood Miniatures: In my experience, these kits are excellent value.You should know in advance that you may have to supply your own drawer pulls, as well as hinges if you don't want to use ribbon hinging. Fern's catalog drawings are meticulous, and if you see a dot where a drawer-pull would be, that's why.I'm not sure I should even say that, because it would be awful to discourage anyone. She does a wide range of styles and types, frequently because a particular piece has been requested by customers, and does them in limited numbers, not as a gimmick but because it's a very small operation. In her catalogs she estimates the level of difficulty for each piece; older ones disappear as new ones are added. Instructions are detailed; parts are carefully bundled in assembly groups. You'll need to do some finish sanding; you'll need to follow the instructions; and you'll have a piece that's a bit "special" when you're through.

An ad in the current MC says that catalog may be obtained by sending a long SASE to Fernwood Miniatures, 12730 Finlay NE, Silverton, OR 97381. (And yes, I knew Fern as a member of the same club for several years, an acquaintance that's given me the confidence to say she's a lady of integrity as well as talent, and always willing to answer any questions that come up.)

Mary


Previous 10 | Next 10


Page 893 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)