Scale: I ordered bunk beds for the log house I made the grandsons. I thought it would be cute because they have bunk beds. I was dismayed because the mini beds filled the mini room. After reading the comments on Small Stuff, I went over and took a good look at the boys' room. Oh, yeah! Their bunk beds fill up their little room, but it's a lot harder to take it in when you are standing there and the beds are towering over you. Also, the boy dolls look so small on the mini bunk beds...but again, when I take a good look, the little boy looks very small on the real bed.

Bar Turner


House of Miniatures: House of Miniatures kits are available from House of Miniatures, 2388 Pleasantdale Rd, Atlanta, GA 30340-3126

Fax 770-242-1497, 800-679-9090 or http://www.miniatures.com

You can get a price list of their furniture, join their club and get what they send to you every couple of months or order your choice of individual pieces whenever you choose. No, I have no connection with their company; I too enjoy their kits.

Yvone


Mary Engelbreit Clock: This kit is done by Debbie Young in 1/4" scale. Her email address is: yngathrt@gv.net. Her snail mail address is: Debbie Young, 11468 No. Bloomfield Rd., Nevada City, CA 95959. I have seen this in person and even though this "style" is not my cup of tea, the clock and its furnishings were very well done as are all of Debbie's kits.

Marlene


Wooden snowmen: Are they the tiny 5/8" ones? If they are take one, hold it upside down (hat end down) squint at it and say "Sofa leg, Sofa leg, coffee table, coffee table" Yup - wonderful turned legs for modern repro or old style furniture. (some snowmen perform this trick better than others - the ones I got at "Spotlight" work really well.)

Sandra Monk


BED:  2 boxes from pudding mix ( I used Jell-O chocolate pudding boxes). The narrow measurement is just under 3" for the width of a "single" bed (child's or Nanny’s room). Lay 2 boxes end to end and tape together (this is between 6" and 7" long). I use strips of brown paper bag and glue for "tape".

Cut a headboard ( and foot board, if you want one ) from cereal-box cardboard. I like to cut two for strength and put the colored sides together, this leaves the plain side to be painted or covered with pretty paper.

To get a Quilted Headboard, lay some padding (thin quilt batting, fleece,  an old shirt tail, or whatever is handy) on one layer of the cardboard headboard and put your pretty cloth on top. Start on the bottom (under the cardboard ) and sew UP through ALL layers. Then go through a seed bead and back down through ALL layers. If you don't want to use a bead, just put the needle Down about 1/8th inch from where it came Up. When you have finished stitching, tie the ending thread to the beginning one or to a nearby thread. THEN cut the Second cardboard headboard. Wrap a piece of your pretty cloth around it & glue on the Back ONLY. This keeps the glue from leaking through the fabric where it might show.  NOW glue the headboard pieces together, WRONG sides matching.  When you put padding and some pretty cloth on the boxes, bring the cloth down far enough that it will touch the "floor" all around. This way you will never see the boxes.

If you want to, you can cover the box unit with fabric or paper before you put on the padding & pretty cloth. Then it looks "finished" if someone looks at the bottom of the bed.  BOXES... If you think about it most of our wooden furniture is box-like. Dressers, TV cabinets, night stands, hutches, kitchen cabinets & etc. You get the picture.  If you don't want the colored side to show TAKE THE BOX APART, turn it inside out & glue it back together. I have even cut an opening in a box for a Fireplace and bent some other cardboard for the firebox, then added some twigs for logs. I glued these in as this was for a two-year-old's doll house.

Ann in AZ


Vintage Appliances: The ones you are probably referring to are by  K&J Miniature Metal Works, 329 Los Cabos Lane, Ventura, Ca., 93001.  Their web site is: http://www.kandjminmet.com

They also make a very authentic top-of -the- stove percolator with removable lid and coffee ground basket interior.  You can also order an electric toaster from them.  I believe they have added metal kitchen table and chair sets too.

Juanita in Missouri


Victorian Sinks: I'm not an expert on Victorian sinks but I have the new one by Stokesay Ware and it might be what you're looking for.  It's on my web site at http://www.spminiatures.com/kitchfurnother.htm  It's in the middle of the page.

Carol


Victorian Sinks: we also make a Victorian 'Belfast' or 'stone' sink: http://www.stokesayware.com/. These are incredibly common in full size here in the UK. The 'real' Victorian house that we moved into about 16 years ago still had 2 in situ. (One is now in the garden planted with flowers and the other is still in my studio from when I took measurements to make the miniature). You may not have had this kind of sink in America - there seems to be a 'sink divide'. I read lots of references to 'dry sinks' which are not familiar to me.

Karen


Hinges:  Hinges are easy to install if some  care is used. For the ones set into mortises (spaces cut out to accommodate  the hinge plates) be sure the mortises are just as deep as needed for the  hinge plate and the ends of the mortise are perfectly square. Be sure the hinge plate will sit right down into the mortise.

  To make the mortise mark the end of the mortise using the knife to make  thin cuts. Make the cuts deeper, then lay the knife almost flat and  carefully cut from the centre to one end cut. Do the same going from the  centre to the other end cut. Keep doing this until the mortise is as deep  as the hinge plate which isn't very deep. Use a narrow flat file to make  certain the mortise is flat in the centre. Use sandpaper or the flat file  to rough up the back of the hinge plate. Apply a thin coat of 5 minute  epoxy glue to the hinge plate being careful not to get any glue in the  barrel of the hinge. Place the hinge in the mortise. Allow glue to set. It  is set in about 5 min. but not fully cured for 24 hours. When it is cured place the wee nails in the teeth of a pair of pliers and file the domed top flat. Make a pilot hole using a pin in the holes of the hinge plate. Hold the wee nail with sharp pointed tweezers, dip it in a bit of 5 min. epoxy and place it in the pilot hole pressing it in a bit. Reverse the tweezers and place the flat end on the nail and carefully press it into the hole until it is flat into place. Always prepare extra nails because some of  them will fly off into space never to be seen again. Extra nails can be purchased separately.

  If this procedure is done with care the nails will stay on without any trouble. Of course, they are delicate so if the hinges are forced they will come off. For a chest the mortise for the lid has to be cut out on the flat of the lid and this requires extra care, but it can be done successfully. For Canadians Lepages' 5 min. epoxy is the best.

June in London Ontario Canada


Furniture Patterns: Peter Wescott has written a series of 10 pamphlets that contain plans and instructions for building several different styles. Each booklet has about 10 plans in it for a particular style of furniture. They are called the "Mitre Box" series, because a miter box (with saw) is the only tool you need to build these pieces. Find them on my web site Earth & Tree Miniatures http://www.dollhouse-miniatures.com

Tom Berkner


Previous 10 | Next 10


Page 894 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)