I glue cording onto upholstered furniture with ordinary tacky glue and a toothpick. You must use the glue sparingly so it doesn't show, but even if it does, it dries almost clear. And as I've learned from later trying to remove the cording, it sticks really well.

Pat Molyneaux


House of Miniatures: Their address is 3890 Oakcliff Industrial Ct., Atlanta, GA 30340, phone #770-849-9907

Jo


Staining and Gluing: Try taping the glued surface before staining. Tiny strips of masking tape will work fairly well. Even normal Scotch tape helps. The stain will get under the edges a bit, but most of the wood will remain dry. When totally dry, remove the tape and glue as normal.

Judie


House of Miniatures: There are two entirely different companies called House of Miniatures. The one that makes the "kit of the month" furniture kits is a division of Houseworks in Atlanta. Barbara Syrcher has another business also called House of Miniatures. She used to have a shop in New York state but now just does shows. She does carry top quality items.

Beth


Leather Furniture: I had to refurbish old furniture that had been sitting around exposed and collecting dust for 15 years. It was really grimy. After recovering one sofa, which was extremely difficult, I decided to paint over the fabric of the other pieces with acrylic paint. It worked well, for the most part. However, there was one piece where someone had "painted" the flowers on fabric with magic marker. Every time I painted, the magic marker bled through. Finally, to stop the bleed through, I sprayed the painted fabric with polyurethane. The polyurethane on the terra cotta acrylic paint looked exactly like leather upholstery (and it stopped the bleed through). I painted one more time to cover the bleed through spots, sprayed polyurethane one more time and...Voila! Leather furniture. I'm sure this tip could be adapted with other finishes.

Tomi


Chrysnbon Kits: I've used a number of their pieces and have done the following to eliminate that "plastic" look. On the wood stove, spray with flat black paint after it's constructed (before adding the silver trim). On the white nursery furniture, spray with flat white. On the bathroom white pieces, spray with a white satin enamel. On the wood grain pieces, such as the medicine chest, sewing cabinet and toilet seat, I've used a wide tip permanent brown felt marker. It makes the grain stand out and really looks like wood. Haven't tried it on a chair (trying to get around all those little dowels?) or larger pieces.

Ruth


Wicker Furniture: http://www.uncleciggie.com/

This gentleman has wicker furniture kits.

Laura Busch in Burnham, PA


Chrysnbon kits- I buy these to use in "quicky" or inexpensive projects, because dollar for dollar they are the best looking and most affordable minis you can find. I use the individual pieces in a lot of vignette settings.

I often kit bash with them to make them different and I tend to paint them instead of using their stains. One TIP: use the liquid "plastic weld" type cement instead of the the glue that comes in tubes. You assemble the joint, and just touch with a bit of the liquid which will spread by itself. It melts and fuses the plastic without the messy strings and globs you get with the tube type cement.

Bonnie Gibson


Trunks: Yesterday my friend and I tried making the metal trunks that Katherine Furqueron told us about some digests ago. They are really neat. I used the army trunk pattern from Jim's printables and hung the printout on the window so I could trace the pattern onto the brown paper. (My son came along just as I was finishing and asked why l hadn't taped the brown paper to the printout - save me trying to hold it in the right place all the time - DUH).

We found you really need to hold the paper onto the flame, but keep it moving so you don't get any holes burnt in it. Helen got quite a few, but I suggested to her that she paint them black and put nail polish over the paint and I think it will look quite good!! I got one hole.

Diana in New Zealand


"Cheap" Wooden Furniture for DIY'ers: Banner Craft stores in my area (formerly Ben Franklin) sell inexpensive wooden furniture for $l per package (Nicole Mini Wood Furniture-Made in China). It's the sort of thing Dollar Stores might sell, but I don't know if they do. The scale varies from l/l2 to l/24 approximately.

Purists, and many others among you, wouldn't touch this sort of thing, but being open to almost anything within reason, I found some pieces have hidden possibilities. They're OK anyway after giving them a mini to maxi makeover, involving refinishing to various degrees, and adding seat covers and cushions. Also the heights of some of the pieces required correction by gluing beads or whatever worked to the bottoms of legs. I do have to admit that some pieces of this furniture and other similar quality furniture, even I find hopeless.

The pieces I chose to work with - a couple of Victorian style settees, a chest with legs, dining chairs, and an arm chair - after receiving the "treatment" are still undeniably chunky-looking, but they're going into an equally chunky-looking dh - the "Halloween" House in Hobby Builders catalog. Not being a big Halloween fan, my house will have a different theme, yet to be decided.

Pretty soon, I'll have to get a job to support my hobby, then maybe I could afford higher quality dh furniture and accessories. Half my fun though, is in transforming doubtful-looking items into something that could pass muster in an appropriate setting, providing, of course, that you don't look toooo closely.

Also, someone asked about the wallpaper samples in the Secret Room. I found that most, if not all, are repeatable. I picked out a few I was interested in, then copied and saved them. Later, off-line when I had more time, I took them individually into Paint and by repeatedly using the "Paste" command, created a row, which I then copied and pasted again, and so on till I had a page filled. It worked quite well but perhaps someone else has a better or easier way. My computer knowledge isn't exactly comprehensive.

I shrunk some of the pretty boxes at this site to use in my dh. I think I reduced them by half, and they fit quite well into l/12.

Bea


Previous 10 | Next 10


Page 897 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)