Grandfather clock: I have had fun making a grandfather clock. It is black with a japanned finish. Block of wood, 7 inches high and square. Add an extra layer of wood on the bottom one and a half inches. Trim with cornice, mitred accordingly. Trim - cut fancy to form feet around the bottom. Another strip of cornice, mitred, two thirds of the way up. Fancy cornice around the top. False door added on front elevation. Hinges were filigreed tube bead / finding - added last. Spray painted with grey primer, sand, spray, sand, spray. I then spray painted with gloss black. Sand, spray, sand, spray. Took a colour photocopy of the clock I was copying and enlarged it to the size of my block of wood clock. Repeated the image so I had enough for the sides as well. Decoupaged it onto all faces except where the clock face goes. Touched up with gold pen. Added my (real) clock face and hands, some trim, and turned spindles on either side of the face. (Stair spindles cut to size).

Barbara B


Chrysnbon: I made the Chrysnbon organ last spring, and I was amazed that it did not look plastic when it was finished. I just followed the directions (took me a few tries to get the "tissue thing") and used the "stain" that was included in the kit. I did spray it with two coats of acrylic matte sealer when it was finished. That really made the difference.

Lauren Rein


Georgia Matuschak 1/4 scale: Lori Ann Potts of Mustard Seed Miniatures in North Vancouver, BC bought out Georgia's excellent line and has been doing some really neat stuff with it. You can contact Lori by email at mustardseed@uniserve.com

Debi in Quesnel


Modern Stove: A pretty convincing stove can be made with a block of balsa wood, some snaps used as the burners, and a little imagination in scoring lines to indicate the divisions between the oven door and the broiler, etc. Use spray enamel on the wood, otherwise you will never get a good finish.

Doris


Lawn Chair Webbing: Some suggestions: (1) look for narrow ribbons at the craft and fabric store, weave and glue in place, and cover with ModPodge or other medium to make them look more "plasticky." (2) I've also seen wider mesh ribbon lately (although only in metallic colors) that might work. (3) Use sections of plastic mesh produce bags. (4) Don't know where you'd find this stuff, but I remember ages ago in Scouts we made laced-together coin purses and "lanyards" (woven/macramé decorative zipper pulls) using thin plastic strips that would be exactly in scale for webbing. Possibly Tandy Leather Co. would still carry this material; don't know if they have a web site or not.

Loretta Sniarowski


Lawn Chair Webbing: In 1/12th scale a 1/8" wide ribbon is equal to 1 1/2". That would make a fairly good webbing. I find lots of 1/8" ribbon at my local ribbon shop and even at Craft World. If you want something smaller use unraveled Bunka, I use it for horse reins and by ironing it flat it makes good trim ribbons for my carriages.

Bill Hudson


Lawn Chair Webbing: A follow-up to Bill Hudson's suggestion re using 1/8 in. ribbon: a coating of acrylic paint and medium would make this look more like plastic, and still be easier to handle than the real thing. Another possibility: paper strips, which acrylics would strengthen considerably.

Mary in Oregon


Hutches: Often it is the knobs that make these little inexpensive hutches look heavy and cheap. They come off pretty easily. Sometimes snapping them off leaves a hole in the hutch. Here is a use for the Dremel - just grind, or sand, them off. I have replaced them with a bead that has a hole. I cut off a "common pin" to the correct length, put it through the hole, and nailed the bead on with that. Or make little colored knobs from Fimo and crazy glue them on. Replacing the knobs makes a big difference. The ones I used had a piece across the top that was big enough to put a decal on. If you plan on decals, they look best if put on a white or very light colored hutch. Water slip decal paper is now available to put through a computer printer.

There are no shelves in the hutches I have but putting in shelves is pretty easy. If you are lighting it to see the treasures inside, put in clear plastic shelves or your light will not show all the way to the bottom shelves. Especially for someone just starting out in the mini world, they can be made to look pretty cute for not very much investment. For me, there was a lot less stress experimenting on them than on a piece that cost a whole lot more.

Terry from the land of Disney


PAINT/Stain: I needed to stain a half inch scale chair. Is it worth setting off the Asthma? I had just finished a miniature stained glass project for the Beach House and picked up the bottle to read the directions. Water soluble and can be used on wood! No smell, and the tiny wood grain shows through. If there is a build up while applying, run a damp brush over it to even it out. Looks just great! Now I've got to find more wood to stain - the mocha was perfect but the green could be dynamite!

Laurie Sisson


Pianos: I agree with the gentleman who recommended Ralph Partelow's pianos - they are gorgeous and correspondingly expensive. I was lucky enough to participate in 2 of his workshops and came out with a harpsichord, square grand, and a Victorian grand which are the pride of my houses. I was going to take another workshop but, alas, not enough people signed up and the class was canceled and I don't think he is giving them anymore...a big loss - he's a great person as well as teacher.

There is another possibility though for anyone who is on a tighter budget and wants a nice upright or grand and is willing to do the work. Mini-Mindus puts out kits for both which are constructed well and will turn out a nice looking instrument if the finishing work is done. I've done both and they worked out great.

There was a music room kit out some time ago with a grand that worked out OK and both the old Nutshell News (I think), and Scale Cabinetmaker (not in business anymore) had plans for anyone who is more ambitious. Jean Beritella in NY (she's listed in the classifieds in several of the miniature magazines) has back copies of some of these for sale.

Ana Gerard


Previous 10 | Next 10


Page 898 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)