Transformer: As far as I know you have to operate your transformer at almost top capacity or you not only burn it out but risk your lights too. Check with Cir-Kit. They have a resistor (I think that's what you call it) that reduces the outlay until you have enough bulbs to match the transformer - this is used usually during construction of the lighting but could possibly be used in this instance. I think the best bet would be to get the correct size for the # of lights you have in your house, but I'm sure Cirkit would be able to be of help - they are extremely nice people. Ana Gerard |
Regluing Tape: I use Quick Grab to reglue the tape. We never bother to prime our houses. If the house is made of very porous wood, a "spit coat" of diluted shellac (add 3 to 5 parts alcohol - denatured, not good scotch) will seal it nicely. Tom |
Roll Top Desk: In the real sized ones, the tambour (slat) top is glued to canvas. I would glue the mini ones to muslin. Shelby |
Roll Top Desk Repair: I suggest using a piece of muslin to remake the desktop. Glue the slats onto it, then trim to size. I assume taking the top off gave you access to the slots for sliding the roll top back in. A little soap or wax on the ends of the slats should make it slide a little easier, but do it gently. Beth |
Lights for art and craft gallery: Cir-kit or somebody makes a cannister style light - the kind you see in "real" places - just a round tube that is installed in the ceiling (so nothing hangs down) and a light bulb goes up in the tube. I don't think they're directional though, like the real ones are. But that might be one option. And then there are the mini-floodlights that *are* directional - they're quite bright but might suit your purposes. I want to do a gallery type setting myself for my pottery collection and have been pondering the shelving/lighting, etc., questions for a while now. I think somewhere (don't you love how definite I am about everything?) I saw a tip or hint or something on making the type of hanger you're talking about for the glass shelves. Might have been in one of the Workshop Wisdom columns in an old Nutshell News. Anyway, that would work very well if you could get each piece exactly the same (which I couldn't). I bought some microscope slides from American Science and Surplus thinking I'd use them for shelves or whatever, and when I got them I discovered that the end of each one is frosted for about 1/2" or so. I think probably for my gallery I'm going to try some sort of "built-in" arrangement of shelves. I bought some bookcases to use but decided I didn't like them. Mary Lynne in Huntington, WV |
Troubleshooting Wiring: I have just added a new section to my web site under the category of Tom's Tips. This section helps explain how to troubleshoot your dollhouse wiring. I hope it will be of some help to you.http://www.dollhouse-miniatures.com Tom Berkner |
Furniture Kits: I have put together kitchen cabinets by Shenandoah and several kits made by House of Miniatures X-acto Series. Both are wood, already cut out and I found them easy to put together and finish. I painted the cabinets, and finished the other kits - some in mahogany and some in oak. I was very pleased with the results. I'm 70 and have Parkinson's with a shaky left hand, so if can do it I'm sure most anyone can. I've also used lots and lots of Chrysnbon kits; some painted, some finished with wood stain. I do not use the stain that comes with the kits. House of Miniatures used to have a club where you got a different kit to put together each month. I was intimidated by them at first and accumulated a great many kits before I got up enough courage to tackle them. It was silly of me, for while not exactly apple pie, they are not difficult and they are fun. If you don't have a mini store near you that sells kits, I would suggest you contact Dee's Delights http://www.deesdelights.com While they are wholesale only, I would imagine that they could give you the address of a dealer that sells through their catalog. Then call that dealer and tell them what you want. Patricia |
Norman Jones is from England and makes fabulous Tudor furniture. He does not sell directly to the public but his work is featured at Tom Bishops' International show in March/April. My friend has many of his pieces and could tell you more about him. Susie can be reached at scampco.com Sue Thwaite |
Painting Upholstery: If you like ready made furniture but don't like the fabric it's upholstered in, all you have to do is paint the fabric with undiluted acrylic paint to the colour of your choice. Saves a lot of dismembering of furniture. Helen |
Shaker furniture: For the person looking for shaker furniture- I found this book in the library- Shaker Miniature Furniture, by Cynthia and Jerome Rubin. Laura Bentley |
| Previous 10 | Next 10 Page 903 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |