Sticking Fimo to Fimo: It is hard to get clay to stick to itself. I always bake the pieces separately and then glue them together with PVC glue.

Mary Kalsiki


Sticking Fimo to Fimo: You want them to be warm and sticky and well conditioned before you try to stick them together. If they still don't want to stay, try using one teeny drop of dilutent. That works to help them stick and cure together. You can also glue them. If one is already baked, you may have to settle for re-gluing them after they are both baked. But if they bake together they should cure together. This does not apply to things that accidentally touch and bake together (ie gumballs that fall together when dropping into the baking pan or such). You can normally roll them apart without it being noticeable.

Noëlla


Sticking Fimo to Fimo: My daughter and I did a clay presentation for Scouts one year and in doing it we learned that scoring pieces before they are put together helps them bond better. My daughter makes wonderful Sculpey dragons and other figures and she has tried this and says it definitely helps. By scoring it just means making several lines on each piece where it fits to the other piece.

Sheila


Sticking Fimo to Fimo: When all else fails in getting the two pieces to stick together when sculpting with polymer or Fimo, try a trick called scoring. Take a knife or other object and make slashes on both pieces where the two will be put together. Sometimes I do this when I need to.

Just something I remember from an art class in high school. When I am done, I take some baby powder and put it on my finger tips and smooth it out. I have found that this helps to get rid of those nasty finger prints.

Laura


TLS as glue for Fimo: Haven't seen anyone mention using Transparent Liquid Sculpey (TLS) to adhere pieces of polymer clay together... this is neat stuff... you can use it as a glue or alone... it can be colored with oil paints, scrapings of oil pastels, powdered pigments, etc... just don't use anything water based... you can use it to make transfers of copy machine print-outs to clay (sorry, ink jet printers don't work well) for fancy-dancy bowls... haven't seen it anywhere in regular stores but TLS is available from several of the polymer clay sites... just do a search for Sculpey and you should find it and be able to compare prices. Sites that sell it usually have a fact page to help you as well.

Sammy Smith


Sticking Fimo to Fimo: To get pieces of Sculpey or Fimo to stick, bake one piece first. Then stick the new piece to it, and re-bake. Works for me on some of the critters I make. Yes, you can attach Fimo or Sculpey to pre-baked items, even to non-clay items. An excellent miniature artisan named Dave Crandall attaches Sculpey to wood, making fine detailing additions to furniture, etc. Just bakes the whole schmear at once, works fine. Not to worry about the heat, wood and paper burn at a much higher heat than that used to bake polymer clays.

Dave Pierce


Micro Batteries: I made a Mini scene pin 1/144th scale and I used a watch battery. It was in a matchbox and I wanted to it to light up when the "drawer" closed. We used an adhesive backed metal foil on the box inside and on the "drawer", soldering to short wires. We also soldered on the other end of the wire to the same metal although another piece at the battery housing, which was in the roof. Although you have to be in the dark (or close to it)to see the light, it does work. The adhesive backed metal foil would probably be available at a speciality electronics store, although Radio Shack may have it.

The battery was a replacement for a timer, that never worked. A rule of thumb for lighting is the requirement for the light has to be equal or larger than the output of the battery. The batteries have labels stating the volts and so do the lights, which I got from Radio Shack.

I also have seen the 9 volt plugs used for small room boxes. These can have a small push button switch, also Radio Shack. If you use a battery, I suggest the ones that have to be pushed to keep the light on otherwise the battery runs low quicker. If you choose a 12V light the light will last a long time as it will never be used at full brightness.

Preble


Sticking Fimo to Fimo: I thought of the Trans. Liquid Sculpey too, but it is not easily available so didn't mention it. These are 2 of the places carrying it:

Wee Folk Creations, (expensive large quantity), 18476 Natchez Ave., Prior Lake, MN 55372 http://www.weefolk.com/

Prairie Craft Co. Best price on Trans. Liq. Sculpey http://www.viaweb.com/prairiecraftcompany/index.html

http://www0.delphi.com/polymerclay/pcc/opening.html good site.

Mary Lou


Toaster Ovens: I have an old toaster oven and for some reason it bakes hotter than the temperature at which I set it. So instead of 265 degrees, I bake it at 250 degrees. Maybe just take a scrap piece of Fimo and test it at different temperatures to see what works for you.

Jonesy


Gluing Fimo: To those who asked about gluing Fimo, Vaseline might be the answer. Vaseline glues baked pieces to unbaked pieces. Glue before you bake. For more control, you can even use a Chapstick. I don't think this works with all unbaked pieces.

S. Cox


Previous 10 | Next 10


Page 908 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)