Light on a cord with a plug: I happened to have two plastic "candles", (the kind with a small, night-light bulb at the end, that you plug-in and place in the window at Christmas time.) I never actually used them as candles in my window, so I removed the plastic parts and left just the bulb and the plug. I needed to thread the cord through a small hole, so I cut the plug off the end, and after threading the cord, I replaced the plug with one I bought at the hardware store for $1.59. I needed the light for a background light for my Nativity set, and for the total cost of $2.59, (including the original cost of the candle which I bought at the dollar store a couple years ago), Voila`! Maggie |
Night Light for lighting: I suggest you make your own. Go to the hardware store. Buy an extension cord the length you would like the cord to be, and they sell sockets for the 7w. nightlight bulbs that you can add to the extension cord yourself. The back end of the socket unscrews, you lay the cord across it like they show you, and screw the back end back on. Then you have a 7 w. bulb for backlighting a room box. Barb Jones |
Light on a cord: There are replacement ones for the Christmas village houses, available at some craft stores and where Dept. 56 is sold. Cir-Kit also makes ones for lighting a miniature room, which might be what you want. It comes with a screw-in holder to hold the bulb. Any mini shop can get it for you. Beth |
Night Lights: Question: The kits I am getting are enclosed on all four sides and opens at the top with a clear acrylic lid. Does anyone know if those bulbs would heat up too much for an enclosed area? Well, assuming you use a 7 watt bulb, you will generate about 25btu of heat. The question is, how fast can your enclosure dissipate this heat. To calculate that, you need to know the materials of the box, the size of each side of the box, and the ambient temperature surrounding the box. It would also be good to know if there is any air movement around the box. Somewhat involved, but basically the same method you use to determine the size furnace (or air conditioner) you need. As an empirical method, put a night lite in the box along with a thermometer and see how hot it gets. Night Lights: Question: The kits I am getting are enclosed on all four sides and opens at the top with a clear acrylic lid. Does anyone know if those bulbs would heat up too much for an enclosed area? Well, assuming you use a 7 watt bulb, you will generate about 25btu of heat. The question is, how fast can your enclosure dissipate this heat. To calculate that, you need to know the materials of the box, the size of each side of the box, and the ambient temperature surrounding the box. It would also be good to know if there is any air movement around the box. Somewhat involved, but basically the same method you use to determine the size furnace (or air conditioner) you need. As an empirical method, put a night lite in the box along with a thermometer and see how hot it gets. Tom Berkner |
Lighting: I built Brooke Tucker's double staircase room and the general illumination was from two night-light-type bulbs at the top front edge of the room. The heat was enough that it charred the ceiling wallpaper and eventually shorted out the lights. I still haven't repaired the damage but plan to replace them with those Auralight strips available through Dee's. Lots of light and the bulbs are shielded better. Dottie in Tucson |
Yes, the Auralights from Dee's Delights are a strip of lights that comes in different lengths (My favorites are the brass ones that are about 5/8" x 5/8"x 10"). Inside this brass box are about 6 bulbs that make light all along the ten inch length to illuminate the roombox. They use 110 power, not a transformer. They don't get as hot in an enclosed space as the night-lights do. They also have a sticky strip that fastens to one side of the box shape and then to the ceiling or wherever you stick it. I'm not sure what other lengths are available as this is the only size I use, but I do know these are the shortest and they come in silver, white, and black as well as the brass. Dottie |
Lighthouses: As I was looking at the micro-Mark catalog I noticed an electronic beacon --a brilliant idea for your lighthouse model. Instead of just flashing, it ramps up the intensity of the lamp to a brilliant burst, then lets it slowly die off, ...just like a rotating beam of light. comes with a plug-in transformer. It is item #82106 and is $19.95 probably plus shipping. It says one can order on-line: www.micromark.com. I love their catalog. A great variety of tools for small things. Barbara Campbell |
Auralights: Just a quick note. If anyone needs Auralights from Dee's, you local store might order from them or if you don't have a local store email below. They are good lighting strips. Ann L. Hunt |
Look on my web site under "Toms Tips" for advice on wiring, shingling, siding, what order to do things, etc. http://www.dollhouse-miniatures.com Tom Berkner |
Lighting Option: I saw a sales circular today for Lowe's Home Improvement Warehouse, and they are advertising a 36" cable light for $14.97. It was pictured as lighting the way down an outdoor staircase, and was is described as flexible, elegant illumination for any indirect lighting use. I wonder if this can be adaptable to mini use. I was thinking of running it around a roombox or inside of a dollhouse. Has anyone seen these? Apparently, you can plug up to 150 feet of this stuff into a 110 volt household outlet, so one length of 36 inches must be very low voltage and fairly cool to the touch. Anita Myers |
| Previous 10 | Next 10 Page 910 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |