Lamp shades: The easiest way I have found to attach shades to lamps is to cut a piece of clear plastic - greeting card box or such - and put a hole in the center just large enough to fit over the socket. Screw in the bulb, and then put your shade over the plastic. From the side, it should look /_()_\ Does that make sense? It's hard to explain without waving my arms in the air!

Dani


Electrifying Chrysnbon Stoves: There's also an orange colored bulb, non-flickering made by Cirkit or Houseworks, forgot which one.   I put one in my parlor stove.

Carol


I've wired a stove. I purchased red GOW bulbs and wired it through the chimney flue. I also added an orange cellophane panel in front of the bulbs. Looks great but for best effect you have to leave the door wide open. I plan to put a pie in so it looks like it's baking!

Andrea Hogarth


Hot Transformers: Don't plug your transformer into an extension cord. Someone informed me that the lightweight cords aren't made for that. I started plugging right into the wall and no more problems.

Gayle


Halloween Lights: At one time I grew some flowers that were called Japanese Lanterns - they were orange. After the frost killed them, they began to dry. I carefully picked them, snipped a bitty hole in the top with scissors and fit them underneath a string of grain of rice/wheat for a Halloween scene. The lanterns now have faded a bit, but I intend to refresh them with an orange food coloring wash.

Connie


To solder to tape wire:

1. GENTLY/CAREFULLY cut the top insulation with an Xacto/craft knife....not too much pressure, or the copper underneath will be cut too, and there goes your electrical conductivity. Do this to both sides of the tapewire, exposing the copper strips as follows...

2. With the tip of the knife, lift up the cut insulation, and peel it off just a little bit - don't need more than 1/4" (max) of the copper exposed.

3. Oh, yeah, forgot: heat up your soldering iron ...that should have been step one - LOL! Plug it in and let it heat up - sorry 'bout that!

4. On your lighting fixture, remove about 1/4" of insulation from the ends of both wires - if needed, pull the double strand of wire apart an inch or so.

5. next, put a bit of solder on the iron tip, place one wire onto the exposed copper and apply the solder to the exposed end of the wire. Do this again, with the other wire, onto the other exposed copper strip. NEVER solder both wires to one copper strip - this will short out your system.

6. Test your solder job by turning on the electricity to your dollhouse, roombox, etc. and see if the light comes on. If it does, you did it right! If it does not, try the procedure again and recheck.

7. When the light is connected and working, you can cover the solder spots with a small piece of electrical tape. This will help keep the connection in place and insulate it from whatever is going to be covering it (flooring, wallpaper, etc.).

ALTERNATIVE: you can use the little brass nails/brads which come with wiring kits and wrap the exposed lighting wire around it, then just insert it straight thru the tapewire insulation into the copper underneath. Again, one to one on the wire to the copper tape. It takes a bit of practice to get the hang of this alternative method, but it is faster.

Laura


Wheat-grain Christmas Tree Lights:  If you can stand to wait 9 months for the after-holidays sales, check the drug stores in your area.  In Ohio, CVS Drugs carries off-brand Dickens Village-type holiday decor that includes a multi-color battery operated light string.  Sometimes they're on sale before the holidays for $2.99, but afterward they are 50% off!  They seem to be exactly like the kit mentioned, except that you have to wrap the battery box yourself, which is no biggie.  CVS  sells other related mini-useful items like garlands, street-lights, fencing, etc., which are sort of sloppy scale -- most 1:16, some   1:12... stumbled onto this stuff on a quest for tape whilst wrapping gifts last year.

Loretta


Tree Lights: I am experimenting using a string of mini Christmas tree lights to light the inside of a section of a house, which has an attached garden, so that the lights are visible outside through the stained glass windows.   Some of the lights are also in the garden. I made a foamcore base with a second level underneath (like a shallow basement) to contain the light string, making holes in the top layer where each garden light can be pushed up from below.  I plan to add jewelry findings with a hole in the middle, which will fit over the tip of each bulb, to make light "fixtures."

Cindy McDonald


Electricity: I have used tape wire for three structures and have had no problem.   I am now into 1/4" which is basically tape wire, so am used to that also, but do have problems striping the plastic off the wire, but have friends that do that for me. 

Isabel


Doll house wiring: Just this weekend I had to repair a portion of my wiring.  My lights were flickering.  It was very easy to do with the tester.  And the error was mine.  I had made the hole to big and the connection was not good.  I fixed it in no time and now the house is bright and beautiful.  I highly recommend tape wiring.  It's very easy to conceal, even under paint.

Tonya


Previous 10 | Next 10


Page 912 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)