Sculpey is much softer than Fimo. You could try mixing them together to get a firmer texture. Cheri |
Making Molds - I use ArmourAll (yep, the car stuff) Protectant - Original Shine - comes in a white spray bottle at your local department store - as a release agent when working with polymer clay . Vaseline will make the clay deteriorate but Vaseline is a great thing to use when you want to soften hard polymer clay that's getting old. Just spray the ArmourAll on your form and stick it into the polymer clay - it will pull right out. Spray your original item (whatever it is you plan on molding) with ArmourAll,press it into the polymer clay and then remove the original item. You will be left with an impression in the polymer clay (PC). Bake the clay at 250 degrees for a minimum of 20 minutes or longer if the lump of clay is thick. When its done, take it out of the oven and let it cool. You will then have a mold of your original item! Sue in NC |
Paper Clay: I just recently discovered paper clay and think it is the greatest stuff. I have even used it for faces and paws on miniature bears! You can knead paint right in with the clay before shaping and save a painting step. I still paint it, but it is easier to cover a tinted surface. Wonderful clay. Joyce |
MICROWAVING FIMO: I know at first glance this seems like a big no-no, but I've tested it many times and it works well if you don't have an oven, or if you don't want to heat up the whole oven for a small project. It is also very fast. It works the same way as boiling the fimo in water on the stove - just done in the microwave. Fill a microwave-safe container with water and drop the fimo pieces into it. Don't worry if they touch; everything will separate easily afterwards. Make sure they are covered completely with water. A few smaller pieces may float; that's ok. Put the container, uncovered, in the microwave and heat on high for about 2 minutes, or until everything begins to boil rapidly. Let the fimo and container sit in the microwave after cooking for a few minutes; they will be EXTREMELY hot! When everything has cooled down a bit, fish the fimo out with a spoon (NOT your hands) and set out to dry on a paper towel. Check for hardness; if they're still soft, cook for another minute or two. Then treat everything as you would baked fimo. Celeste |
Paper Clay: As for the sealer, the only time I use a sealer is when I'm doing cobblestone or river rock where I have to use grout between the rocks otherwise I haven't found it necessary. If you want to seal it, I use semi gloss clear Deft but I would think any clear matte or semi gloss sealer would work. I did an article in the May 2000 Miniature Collector on working with Paper Clay. I love the stuff and use a lot of it so you might want to take a look at it. It's great for rocks, stone or brick. Rik Pierce |
Don't Microwave Polymer Clay: Try not to burn your clay when firing it; fumes from burnt clay are toxic and should be avoided. Invest in an oven thermometer and a timer, and then use them! Follow the package instructions to the letter and you'll have no problem. Should you accidentally burn your clay, do not inhale the fumes; open a window and leave for 20 minutes or so until the fumes have dissipated. If you use a convection oven, reduce the temperature 10 to 20 degrees to compensate for the faster cooking time. Cindy |
Paper Clay: Creative paperclay has a website. www.paperclay.com They are offering free shipping right now inside the US. I buy mine at Michaels, but I think Ames has it too. |
Ceramics: Ceramics is the field of fired clay. The major types are terra-cotta, stoneware and porcelain. Pottery usually describes things that are hand-built or wheel thrown. Items that are slip cast (poured in a mold) are not normally called pottery. Tom Berkner |
Polymer clay sites: Here is a modest list of links I like... http://www.stanford.edu/~jenea/artbox/millefiori/howto1.html http://www0.delphi.com/polymerclay/pcc/openinstruction.html http://www.jaedworks.com/clayspot/polyclay-faq/molding.html http://www0.delphi.com/polymerclay/Castle/home.html http://www.geocities.com/SoHo/Bistro/5298/MSATclayTIP.html http://members.tripod.com/~Folkgal/ir00001a.htm (my favourite) :-) FOOD! http://www.efn.org/~variscom/page5.html And here's a chat site just for polymer clay. Go here: http://www.geocities.com/minisuzyq/ then click on the next page "MSAT groups to join". At the very bottom of the page is all the lists you can join. The polymer clay one is called "Clay Art". Dahn |
Home Made Paper Clay: To make ones own paper clay. Needed-- Food blender, water, paper to shred, plaster of Paris Concept-- Figure out how much paper clay you will need by using the volume of water to represent the amount of clay needed. Put the water in the blender. Shred the paper into the blender with the water. Put the cover on the blender (a must) and turn it on to further shred the paper. Think in terms of getting a sludge of water and paper. When the proper sludge consistency is obtained, pour this into a bowl and then add the plaster of Paris until a sludge/cream consistency is achieved. It should be dense enough so that it does not run when held in your hand but remains as a moldable lump. Cold water and the plaster = longer working time. Hot water or salt added = shorter working time. I would imagine that the consistency of the paper water sludge should be like cooked oatmeal or farina after it sat around in the bowl for half a day. Coloring can be added to the paper water sludge while still in the blender. Of course this is only another form of paper mache, very thick and stand alone moldable. Bob in Hollywood, FL |
| Previous 10 | Next 10 Page 920 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |