Antiquing Window Glass: Another use for Weldbond glue is to make "leaded" windows look like old glass. After applying the lead tape, thin some Weldbond and paint it on the window, allow to dry and presto! old glass. I learned that from Gail Vaughn. She said it is the only white glue that dries absolutely clear.

June


Cornices: I have 2 cornices on windows in my First House...but in the master bedroom on the 2nd floor the drapes and cornice are in a wine velvet and the picture is so dark you can't see it. However, maybe you can see the one in my study on the first floor which is covered in matching wallpaper (may make it sort of blend in with the wall behind it!).

I'll try to explain. Picture a board (let's say 3/4" wide) as long as the width of your window. Now, on the bottom of the board you may choose to scallop it, or leave it straight and plain (my bedroom is scalloped; my study is straight). To each end of this board, you must glue a piece
of wood the width of the board (3/4") by say 3/8" (you now have a u shaped board with a long middle I_______I. Cover this board with a fabric of your choice or, like my study, matching wallpaper. Glue this board at the top of your window on the outside of the curtain/drape. You now have a nice finish on your window. Surely hope you can understand this.

Rita S Pierce


Enlarging Window Holes Without Splintering: Quite often it will help if you place masking tape over the area you want to cut, draw your lines on the tape and cut through the tape and wood at the same time.

Tom Berkner


Cornices are rigid -- usually made of wood and sometimes covered with fabric. They mount on the wall like an upside-down wooden flower box and your drapes go up underneath and inside them. Valances are drapery material on an exterior curtain rod which extend out over the drapes. A good picture of these can be found at http://www.loisinteriors.com/photo.html .

I have a book, which is an excellent source for window dressings, entitled: "The Encyclopedia of Window Fashions" by Charles T. Randall. Stores that specialize in upholstery design & window dressings usually carry it or books that are similar. It's a great tool for reference.

Anita Myers


Dollhouse Curtains: I make my curtains from various widths of lace. I use Beacon's Fabri-Tac (get it at JoAnn's or a craft store). I glue various types together to make them longer. Then, I attach them to the window sill at the top with a very narrow piece of velcro (self-sticking). I put the rough, sticky side on the sill, then, I put the softer side to the top of the lace and there it is! You can pull them off and change them anytime you want, no rods either!

Anita


Curtains: I've made beautiful curtains and drapes for both my dollhouses and have never sewn a stitch! Just use your hot glue gun. Works like a charm. Fast and easy. Just be careful not to burn yourself. Also great for making bed spreads and pillows. Good luck.

Tonya


Curtains: Don't pay money for the dollhouse curtains you see in the stores and catalogs! Just look at a picture and make your own! You can make them for .50 or a little more! You can use material scraps or lace. Look at Wal-mart's selection of trims and laces. You'll find everything you need there! As far as curtain rods, use tiny dowels with beads on the ends. Very cheap!

Sue


Bay Windows: I went to Home Depot today and found something that may be inexpensive and useful to some of you. It is the Jiffy Herb Garden, consisting of peat pots and seeds for oregano, basil and parsley plants for under $5. The interesting part is the packaging the kit comes in. It is in two halves that snap together to form a mini greenhouse, but each half has the shape of a perfect bay window in 1 inch scale. Even though they are made of plastic, I guess parts of it could be painted or trimmed.

Cheryl Kerfoot


Whimsical Windows: I used the top portions of those wonderful, thin oriental fans as windows in my bark/twig house (only 9 inches high with small windows). These particular ones have a butterfly design (they're not all like that). I painted them and applied clear gallery glass. Only problem is that now I have to electrify it so that the light can flicker through the windows! I have christened it my "Butterfly House," and now I need to find a sheet of butterflies to cut out and apply all over it. The fan came from Pier One but I don't know if they still sell them. I've used pieces from the fans for so many projects of all scales. Very delicate and fun to work with.

Theresa Thomas


Faux stained glass: Try gallery glass. You can buy it at Craft Stores or Wal-Mart. They have simulated liquid leading and window color. I used it on my Tudor and it looks great.

Penny Johnston


Previous 10 | Next 10


Page 923 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)