Fimo Buttons: Roll out a snake of Fimo and cut cross-sections from it. Take a needle (of the diameter that you want the holes to be) and poke holes in it. That would be for a very simple button. For one that has a border, find a straw or something that is smaller than your button, coat with talc, and impress gently into the cross-section and push the holes in. Bake and glaze with the Fimo varnish. I have also used seed beads for buttons, though it is advisable to use the nicest ones you can find. The cheapies tend not to have much uniformity.

Kim from Canada


Clay: I invested about $20 in a nice toaster oven dedicated to polymer clay, and it is my best friend!  If you are using your regular oven for clay, cover your work with  a tent of foil to keep the plasticizers from floating around and clinging to the oven walls, and make sure you use an oven thermometer!  Even for toaster ovens, all oven temps fluctuate, and it can make for some nasty fumes and burnt clay!  Also, if you use any kitchen utensils (knives, etc.) for polymer clay, just make sure it's something that won't be missed, 'cause you'll have to dedicate that utensil for clay use only.  Even washing with soap and water won't do the trick;  those plasticizers are stubborn!

Sharon B.


Glass Bricks: Some years ago I needed a glass block window. Went to a home improvement store and bought a sheet of plastic grid that is used for light fixtures. It was white, about 1/4 of an inch thick and the spaces were about 1/2 inch square. Cut the size I needed and sealed one side with tape. Mixed some clear resin, poured a little in and after it hardened filled it up. Looked real. The grid is handy for other minis too.

Carol


Cold Porcelain: I received this recipe from an egger.

Cold porcelain paste recipe

  • 3/4 cup of white glue
  • 1 cup cornstarch
  • 1/2 cup of water
  • 1 teaspoon of cold cream
  • 1 teaspoon of glycerin

Mix wet ingredients until smooth over medium heat. Cook for a few minutes and add cornstarch. Stir continually until it forms a ball, remove from pan and mix thoroughly with hands. (I like to cover with a damp cloth until it's cool enough to handle.) Do not refrigerate. Keep in an airtight bag... Use as you would any modeling paste, can be molded and used in many ways... use chalk powder to color, or paint with any paint when dry. Use cold cream to moisten mold and/or when you are working with it, if it becomes sticky.. Or ..dust with cornstarch...adjust ingredients for more or less.

Another one (for some reason called Mastic)

  • 1/4 cup of water
  • 1/4 cup of cornstarch
  • 1/4 cup of Bicarb soda

Mix all ingredients together and cook (stirring) until it forms a ball. This is used the same as above. Great for flowers and tiny things!!!! and so soft to work with!

Bonnie Gibson - Tucson, Arizona


Fimo Additives: PLEASE DO NOT ADD ANY CHEMICALS TO FIMO AND OTHER MODELING COMPOUNDS unless you don't value your life! Fimo is a non-toxic fun substance and fooling around with its composition with chemicals is extremely dangerous. If you need thinned modeling compounds, use Liquid Sculpey.

Mary Eccher


JoAnn's Bird Cage: Maybe someone suggested this and I missed it, but I bought a birdcage at JoAnn's today which is shaped like a house.  Can be hung or sat, but I like having all four walls and can hang it or sit it down as an unusual room box.  Also, allows me to change whatever I am interested in at the moment or my newest things or oldest and dearest things.  They are at 40 percent off here, which took a $22.99 item down to $13.  I know it would go lower eventually but the $13 is a bargain to me.


Arched Doorways: I purchased an Art Ply house once and all the doors were arched. I left the arches from the center hallway into the living room and dining room, but cut all the others to accept Housework's doors. Even had the foresight to do it before I put the house together! The kit did not include frames for any of these doors, so I had to make my own. I traced the top of punched out bit onto a sheet of balsa wood, and used flat strips for the sides; I made the balsa arch the same width as the strips, obviously. I used balsa because I could cut it with a scalpel; I don't have very much luck using a power saw for that sort of thing. I painted all the pieces before I glued them in place. After the glue was dry, I measured the depth of frames and wall, and cut a long strip of white poster board to glue inside the arch to finish it up neatly.Some folks call it tag board, but it's heavier than paper, but lighter than cardboard. A quick touch up with paint to clean up any smudges and fingerprints, and it looks fairly respectable. If you want 'carving' you could glue crochet-type lace or even paper doily bits around the frame; it would help to hide the seam where the arched piece and the strips join.

Dani


Spiral Stairs: The current issue (June/July 2000) of "Classic American Homes" Magazine has some items of interest in the back advertising section. One is a color ad showing 3 styles of real sized spiral staircases. Looking at this picture, I think it would be easy to make mini versions.

Anne Gerdes


Staircases: As for the stairs, my dollhouse is an old one which is really just a series of wooden boxes with dividers in them, stacked one on top of the other. It does not have stairs, which always bothered me as a kid. Recently I built a false wall at the back of each room, with a door cut out so that it looks like it leads into a hallway, and I pretend there is a staircase back there.

Celeste


Greenhouse Structures: I just wanted to share an idea that I'm planning on doing someday with the Vertical IKEA Greenhouse. Actually, it requires buying another one. The greenhouse has a front-opening door, and I'm planning to get another one, reverse the hinges on that one, then attach the two greenhouses together in the middle. That would give me a front-opening house. The only problem is, unless I want the house to be completely "see-through", I'll need to cover the outside with brick sheets of something. Once again, no problem! But I'm thinking for the price it's not a bad idea. Also, it's wall hanging, and closed in.

Cheryl


Previous 10 | Next 10


Page 926 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)