Polymer Clay Molds: Molds for polymer clay are among the easiest molds to make because they can be made from many hard products. Polymer clay itself is very popular for tiny molds.

One sided press molds: Make sure your item will release from a press mold. It shouldn't have any undercuts for the clay to get caught in. If it does you will need to make a separate mold for that part and attach it to your casting or make a multi part mold.

1. Glue a handle of some kind on the back of your original so you can remove it from the mold when you are done. (A button back or a glued on piece of dowel works well.

2. Coat your master piece with a very light coat of liquid soap so it will release from the mold

3. Take a very soft piece of clay you have warmed up and press your master into it.

4. Remove the master and bake your mold as usual. Now you can press clay into the new mold and create several flat pieces.

If you need this to be a two-sided item like the front and back if a doll's head and neck, make one mold for the face side and one for the back side and press these together after removing from the mold.

If you need a mold for larger castings or a more permanent mold, you can make it from many other materials. The process is the same for plaster, resin, or rubber silicone. I prefer silicone because it is flexible so you can have an item with small undercuts and still remove you castings. You will need a disposable plastic or cardboard box. (Plastic take-out box , margarine container, checkbook box, etc.)

1. Attach your soaped master tightly to the bottom of the box. (Rubber cement works well for this so you can get it back off the box). Mix your mold-making material as directed on the packaging. Pour over the master and fill the box enough to comfortably cover the object plus a little more for strength. Let the mold-making material set up. Don't rush this process. Break or tear away the box and remove the original from the new mold. (Let plaster molds sit 24 hours or so until they are no longer wet and cold to the touch before using them.) You can now cast in your new mold:

Plaster molds: Cast with ceramic or porcelain, press in polymer clays.

Resin molds: Hard mold - used for press in clay only

Silicone mold: Flexible mold used for casting resin pieces or pressing in fimo, etc. It is also used for making master molds to create other molds

Deb Laue


Polymer Clay Molds: Fimo is a polymer clay and, yes, all polymers are good for the die you want to cast. For the mold, I use Dow-Cornings HSIII. It is a very flexible rubber that allows for some undercuts without tearing. Very easy to use although pricey for what I mold. A pound container is approximately $27, but you can mold quite a few things with a pound. Allow 1/4" to 1/2" of "rubber" over your die and around all sides.

Mary Lou


Polymer Clay Molds: Sprinkle with talc or cornstarch as a release medium.

Laurie Sisson


Problems with eBay:

If the seller has a history of good feedback and you're having a problem it's possible the person has gotten ill or has a family crisis. You can leave negative feedback but that's fairly drastic and you should wait until you're certain that you've been cheated. I remember some poor woman who suddenly got a lot of negative feedback after having an excellent record and it turned out that she was rushed to the hospital with a serious illness. She was banned from Ebay and was heartbroken over it.

As a seller, I've run into problems collecting from winners and one trick I use is to request their user information. You will be sent their address and phone number via email . I never have used the information, but the reason why I do it is that the person will also receive an email that tells them that you are requesting information about them. This essentially sends a message to the seller that you mean business. You can of course try to call or write to them. You can find how to do this at http://pages.ebay.com/help/buyerguide/user-other.html

Hopefully, they have given accurate information and if they haven't you can report them to eBay.

Another thing you can try is to leave neutral feedback commenting that you have been trying to reach her/him. The down side to this is that you can only leave one comment per auction and you will be unable to leave negative feedback.

One thing I have done is to put in the subject line of the email I send "Ebay auction #.... final notice before negative feedback is left". That will get their attention.

You can also look up recent winners of the person's auctions and ask them if they're having problems with the seller. This will give you an idea if just maybe your auction slipped through the cracks or the seller is having a general problem. Maybe the seller is running too many auctions simultaneously and is not keeping track of things.

Lastly, feedback is not always accurate. Both sellers and buyers are reluctant to leave negative feedback for fear of retaliation. Frequently, if you see negative feedback for a seller, that seller has also left negative feedback for the buyer and vice versa. I had been threatened with retaliation on several occasions from auction winners when I pursued them for payment.

Carol, S P Miniatures


ALL ABOUT KEMPER CUTTERS: Kemper cutters have long been available for ceramic work. Since the emergence of modeling compounds, they have become vital to the miniaturist for foods, plants, flowers, pictures frames, toys, etc.

Kemper makes several designs of cutters, but the most useful for miniatures are the Circle, Heart, Flower and Leaf.

Various SIZES of these cutters are available, but the most popular for miniatures are the 3/16", 5/16", 3/8", 1/2" and 1" sizes.

HOW TO USE KEMPER CUTTERS: Roll modeling compound out on a flat surface to desire thickness. Hint: After last roll, lift the slab of compound from the flat surface, rub the surface clean with a tissue, then lay it back down. Then your cut-outs will not stick to the surface and distort when you pick them up. Use the cutter as you would a cookie cutter (do not use the plunger inside the cutter as it will leave a mark on your cut-out.

SOME EXAMPLES OF USE:

Flower and leaf cutters speak for themselves for creating flowers and plants. The 1" circle cutter and the 1" heart cutter are wonderful for cutting out cake shapes, perhaps also using the 1/2" circle or heart for a second tier. The 3/8" flower cutter is great for gingerbread men. Cut out flower and gently stretch two of the petals to form legs, then score features with a toothpick. The 3/16" and 5/16" flower cutter is useful for creating the calyxes on strawberries, eggplant, squash, etc. The 5/16" circle cutter cuts just the right size one-inch scale doughnuts. Use a round toothpick to make the hole. Any of the smaller size cutters can be used to decorate cakes, frames, etc. Cookies of all shapes and sizes can be made using the cutters, then decorated as you desire.

Mary Eccher


Clay Cutters: Try http://www.dickblick.com for clay cutters. I have also purchased them from Michael's as well as at http://www.polymerclayshoppe.com.

Louise in NC


Kemper Cutters: The web site I discovered for Kemper Cutters is on http://www.pannikins.com under supplies.

Jerlean in Las Vegas


Polymer Molds: I took my one and only mannequin and a piece of prepared clay and pressed the mannequin into the square of clay which I had powdered the top of. I pushed it 1/2 way in, let the clay rest for a couple of minutes then carefully pulled the two pieces apart. I then repeated the process using the back side down in the clay. This gave me two sides which I baked, let cool and sanded the top down smooth on each piece until they fit together reasonably well(they were not perfect but very close.) Then I could powder the halves down and place my clay into one and press the other down on top. Let rest for a few minutes and remove from mold. Bake and then sand the small imperfections off. Now I have all the dress forms that I need. They are, of course, not quite as nice as those professionally made but they are not bad looking dressed

Dottie (Florida)


Softening Polymer Clay: To soften my clay I use a glass blender bottle I found at the goodwill. I use it for clay and the bottle that belongs on the blender is for food. I break off little chunks and add them in as each one is chopped. It softens the clay quickly and you can also use this method to blend two colors such as black and white to make rocks or slate. Another way to soften the clay is with the pasta machine. I have two of them. I ordered another one from Dee's Delights and now I have a back up in case I need it. When you have very old, hard clay, you can add a little Quick Mix as you chop or roll or work the clay. That will soften the clay back up. The secret to softening clay, no matter the method used, is to do only a tiny bit at first and then add a little at a time. The chemicals will be working and will aid the rest of the clay to soften.

Norieta in Hawaii


Fimo Frames: You can make very effective frames from Fimo. You need Fimo, and anything that makes a pretty impression. Look through your box of buttons or jewelry findings or earrings or tools. You will also need some kind of gold buffing powder. I used Rub 'n Buff but any will do. Work on a tile that can go straight into the oven. Choose a brownish color Fimo. Make 3 long sausages of Fimo in 3 thicknesses from fat to thin. It must be longer than the perimeter of your painting. Lay them out just touching with the fattest at the top and thinnest at the bottom. Now make regular impressions along the length of the whole thing with the findings or earrings or whatever. The trick is to make the impressions overlap 2 or more sausages. That melds the whole together. When you are satisfied with the result (don't be too fussy) cut your miters for your corners and form it into a 4 sided frame to fit your picture. Allow for a different color mounting board or two to add to the effect. Knock it square. That is important. Bake. Cool. Now rub it all over with gold Rub 'n Buff. You will be really surprised how effective they look.

Barbara B, South Africa


Previous 10 | Next 10


Page 929 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)