Air Drying Medium to Sculpt: You could try some Crayola Model Magic. It is ready to go, air-dries and "probably" wouldn't hurt the dog since it is made as a kid toy, though I won't go out on a limb and say that for sure. After all, chocolate is a non-toxic substance to humans, but to a dog it could be lethal. Might want to check with the vet, or with Crayola to see just how "non-toxic" it might be. Model magic can be a real twit to work with, in the way that it isn't easily stored. It will cure "eventually" no matter what, as it says on the Crayola web site. Some people have had success with putting the Model Magic in a jar and covering that with water. The fresh stuff will cure in about a day. Then it can be painted. I have made buns, cakes, animals, piņatas out of it. It doesn't hold very intricate details, but it doesn't need kneading and warming. Beyond that, I could only offer Das modelling clay (which I find smells like fish, is cold and slimy and makes a real mess on one's hands). I don't know of its longevity, though. Kim from Canada |
NOT burning Fimo: A very simple way to avoid burning small items made with Polymer Clay is to heat the oven to the required temperature then turn it OFF. Put your tray (I use a ceramic tile) of little items in the oven and leave them there until the oven is cold. Check that your item is hard enough, and if not then repeat the process. This works just fine for very small or very thin items, but of course for bigger or thicker items this may not be practical. Kaye |
Fimo vs.Sculpey: Fimo, Sculpey, Cernit, Promat, etc. are all plastic modelling compounds that can be molded, then baked, to a hard product. Now....FIMO is the firmest and the most MISERABLE to knead to a workable consistency. BUT the colors are true and, once workable, your miniature creation does not smoosh as you create it. SCULPEY and the other compounds mentioned above are much softer, and you think, "Hey, this is great!" But from 20 years of experience I can tell you that many of the colors are either too bright or very dull after baking, not true to life. And they are actually too soft to create great detail. (Actually there are times when you WANT this - example, string beans for which I use the green Sculpey mixed with white, where you want a dull, flat finished product.) Sorry to digress, but I would like to give you an example of a clear product vs. a dull one. I have slowly been getting back to making my foods after a bunch of stuff, and needed to make some cucumbers and watermelons. So instead of kneading the fimo, I grabbed the sculpey which is softer, and went to work. When baked, I was disappointed in the overall appearance...not realistic at all....dull and lifeless. Anyway, I guess you can tell that FIMO is my compound of choice, even though it is more difficult to work with. Mixed 1 part to 1 part with a FIMO product called MIX QUICK, it is the best medium for miniatures. Colors stay true and detail can still be attained. (Why on earth the Eberhard-Faber Co. doesn't do that mixing for us before they package it, I will never understand!) Mary Eccher |
Polyclays: I think Fimo is best (of course, this is highly subjective as it is a personal choice). It is a little harder to work with, but tends to be a lot stronger when it is cured. I find Sculpey gets a little gummy after you work on it for a little while and has a bit more of a tendency to droop in warm conditions. Sculpey does have the advantage if you want to make a mold, though, as it takes details better. There are also other polys that I haven't tried, like Premo (just when you thought it was a two-party system;) Kim Bulback |
Fimo Info: Here is a wonderful site that has all the information you could ever need for polymer clays! Many of us in the group use polymer clays constantly, and have for years and years. (I also have a lot of old clay that has been kept in sandwich bags for years, and it hasn't eaten through them yet.) You might find that the Fimo you have is crumbly when you try to use it. You must warm it up to make it workable...hence the tips on keeping it in your bra... You also might want to get some 'Mix-Quick', which can be mixed into the Fimo to make it more workable. So, take what you have out of the bag and play with it! Here is Mary Eccher's wonderful site with directions for making some food...great place to start. (She is one of the people who have been using this stuff for many years, and is still with us... Thank Heavens!) Kaye in L.A. |
About Polymer Clay (Fimo, Cernit etc)
Lesley, Johannesburg, South Africa |
Bakers clay: A while back I made mention of "Bakers clay" and I have been asked by a number of folks about it; like "what is it"? To me what I use for Bakers clay is a short cut. Take a slice or two (depending on your needs) of white bread and remove the crust. Using white glue (Elmer's) thoroughly dampen the white bread with the glue and begin to knead and squish it together. You are trying to make a lump of moldable goop out of the bread and the glue. BE FOREWARNED This is a wonderfully messy project. The bread/glue combination will tend to stick to your fingers like glue(VBG). For this I keep a bucket of water handy with paper towels. If you dust your hands with flour the sticking will be greatly reduced. When you have achieved a moldable mass, pinch of what you need and make your creation. The rest can be placed in a plastic wrap and put in the fridge and it will keep for a few weeks. The Bakers clay air dries and it will dry in about 24 to 36 hrs. When dry it is very light so if you drop it on the floor it will not break. It can be painted with acrylics and when the paint is dry a coat of clear nail polish and you have something that is very close to porcelain in appearance. DrBob...Delray Beach, FL. |
Bakers clay: or bread dough clay. My clever and artistic sister made me incredible roses, etc., many years ago. She coated them in various things, varnishes, etc., then I packed them up when I had babies. When I unpacked, when the mice hadn't eaten, had turned black or had growths of now hard mold. 'Nuff said. Beth in Maine |
Children at shows: After reading all of the experiences that people have with children and vendors I have decided to say my peace. I won't even get on my tallest platform *wink* Children and their behavior are dynamic little critters. I was taught to not touch unless I asked, but I also remember that some things were SOOOOO beautiful that I forgot to not touch, but I NEVER, EVER treated those things with anything but the utmost care and respect.. after all they were so wonderful and tiny. To me it is EXTREMELY obvious what kids are at a show because mom drugs them, and those that have a love of the hobby themselves. The ones that love the stuff stand transfixed at your table staring at whatever it is that caught their little heart. Those that are there because mom drug them are more difficult to deal with, and are more interested in leaving than buying our wares. Then again, I say take those parents out back to the woodshed, after all if they had any manners they would leave those kids at home, or control them better. Yes, there are exceptions I am talking about the inconsiderate parental masses we have all encountered. It is important for all of us (no matter how much we think all kids are trouble) to understand that these young people make life decisions based on their childhood experiences. If we treat kids fairly, and honestly we will all have influenced that young person positively. If we treat the kids with the respect that all humans are due then we will receive the same when we are older and need care from the same children we interacted with. Yes, there are times where children may make mistakes, we all do. If something is broken because they were rough, then yes it should be paid for. If some thing was broken because it was fragile and at the edge of the counter, then it is our own dumb fault as vendors. We need to remember that the wayward adult purse, shopping bag, or jacket is equally guilty for the same offense. We mumble about kids being inattentive and disrespectful when they reach, and talk about "accidents" when an adult reaches or swings their purse around. Consider your logic before you make an assumption. So that is my soapbox. I love children, even the obnoxious ones, as I know that it isn't their fault that their parents may be selfish idiots who don't know the word discipline or baby sitter. (again, yes there are exceptions to the rotten kid thing) Sudie Parker |
Children at shows: I haven't seen a post about kids at shows who are there because mom/dad couldn't (or wouldn't) get a sitter. The children don't want to be there and are bored and we all know about bored children. I have had a number of children buy from me and it's wonderful to see their enthusiasm. I've also had the "I'm really bored and I hate being here and if I cause enough trouble maybe mom/dad will leave" kids hit my table and it's an unpleasant experience. Carol |
| Previous 10 | Next 10 Page 930 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |