Handling Miniatures at Shows: I have to comment on picking up items to closer examine. Having been a judge for several county organizations, it is a habit for me. I have seen some pretty shabby work back there folks, though at 1st glance at the front would have given them the 1st place. I suggest you back the rugs and needlework with fusible facing to finish off the piece. You then have presented a cleaner item, safer to damage, and lays flatter. I'm just glad that no one has caught me using my 10 power jewelers loop to see if the stitches were all in the same direction!

About tugging at the corners of a piece not square, use that sign as a helpful hint that it needs a little blocking on it. I find a piece of needlework that is great, but can it be corrected so I can maybe fix it when I get it home? The best compliment someone who has looked closely is that they have purchased a quality piece!

Protect your needlework in a clear plastic bag so that your fine work can be seen but not damaged.

Lisa Lynn


Plastic melting: Yes, polymer clays can eat through plastic (certain kinds anyway).  Always put your clays in a plastic bag (this type of plastic has no adverse effects) before storing anywhere.  As to affecting metal?  Won't eat into it, but heat, even the heat of a summer day, can make it bake onto metal.

Mary Eccher


Handling Miniatures at Shows: As far as holding minis are concerned, until I was a dealer at shows and had some customers handling and abusing my samples, I really hadn't understood this problem for dealers. Previously I would pick up an item that I was interested in buying...my natural impulse to touch and feel it. But now I always ask first if they would mind if I held it. This way, it is a method of assuring the dealer that I will be careful with their merchandise and it also reminds me that they might be a dealer who doesn't want their minis held. This is especially true for stitchery, or other materials that will stain from the natural oils from our hands.

Roz Weitzman in Toronto


Plastic melting: Yes, polymer clay doesn't get along well with certain types of plastic. I've found, however, that those little plastic (black, white, or gray) 35mm film containers are impervious, as well as ordinary zip-lock type baggies.

Dave Pierce


Handling Miniatures at Shows: It caught my eye that is was considered impolite to turn an item over for inspection. I have always done that, and expect a buyer to do the same. If you aren't proud of your back, then maybe you should cover it.

I also look at the back of something to see what kind of backing is there... is it paper (glueable to the wall), or does it need backing? if it is finished on the back I get a a better sense of "value" as someone took the time to finish their work nicely. If they are "loose" like upholstery, then I turn it over to see their skill for the needle. If a buyer of my work doesn't, I am the first to flop something over to show them my ability to hide a thread. The craft world here in WA has never had an issue of closely inspecting items.

I also believe that wear/tear, handling/ and all that other usage is part of the selling business. Do you buy a car without touching, sitting, or driving it? Did you buy your home without "checking it out"? When we sell expensive things we need to understand that in order to for humans to make decisions about the potential purchase we all need to touch it. I used to get all ruffled when people touched, how rude, don't they know how much work it takes... blah blah blah. Then I met three people who taught me how important it is to touch what we buy.

The first man I met was Stephan O'Meara who promptly plopped several pieces into my hands during our visit so I could "really see it". Can you guess the stroke I had when he put that gorgeous Lapis bowl with the gold swans in my sweaty little palms? During our show and tell a piece was dropped and lost on the floor, but he didn't even get ruffled. Before the end of the show he did eventually find the piece, but he still didn't get upset when it happened. I was more upset than he was. Needless to say, Stephan will get repeat business from us in the future.

Andy Benedict of Maison des Maisons was the same way. I was admiring his Navajo pottery, next thing you know the plexi comes out, and he is plopping fragile little bits into my hands for me to feel and enjoy. He then showed me his Irish mini crystal, again, by letting me feel his offerings. What did it do? it cemented a sale.

Jim Pounder was there, and when I stopped to admire one of his new pieces he immediately wanted me to pick it up to feel how heavy the pieces were. He was so gracious to share his work with us, and that included showing the "underneath" He was so nice to share his work with us and let us see with our hands, that we bought 3 of his pieces.

Yes, some of this work is solid, such as bronze, but then some of it is crystal, pottery, and very fragile stone. These men knew that it was more important that we get a feel for something, as it makes a far quicker sale than if something sits behind glass, as a vision. Yes, I have to replace silks, antique laces, glass, wood, and all sorts of things. It usually takes a week to repair things if I don't "do it" during the evenings of a show. It is part of ensuring that I make a sale. that extra bit of time spent repairing wear is well worth the return. After all, I learned that the quickest way to close a deal is to put it in someone’s hand.

I also learned that by getting the names addys and phone numbers, and calling/writing those that seemed interested in my work that I get Post-show sales because I took the time to follow up. Yes it can be time consuming, but it means something to send a picture of the item they were interested in with a personal note thanking them for their interest. This too I learned from these men. All three of them "followed up" with me within a week with a phone call, note, or email. What did it do? it further cemented my future purchases with them.

Sudie Parker


Baking Fimo: Heard a hint the other day that might be of interest to those who are concerned about baking polymer clays in their regular oven.  Donna Kato, who is a frequent guest on "The Carol Duvall show", was on "Home Matters" on the Discovery Channel and she suggested putting the polymer clay in one of those disposal aluminum foil pans and covering top securely with foil before baking.  She added that she would let it cool completely before opening it up.  Sounds like a good suggestion for those who don't have a toaster oven to bake their clay in.

Marsha Heeter, Dallas, OR


Displaying at shows: Arrange your table so the children, and clumsy adults can't easily reach the most treasured items. I have my best dolls on risers at the back of the table. Use those small white shelves with the pop out legs (Wal-Mart) at the back and sides of the table, then in the center have a double stair step (bought at a craft sale for Beanie babies) for the featured ones. We rearrange these frequently , there is little chance for anything to be brushed off the table, , then in the center front have the plastic shoe boxes with small stuff and naked dolls.

I have fabric to drape over the top of my table and a lighter shade goes over the small tables. Looks good, simple to set up and quick. The shows I go to allow risers so I have 12 inch pieces of pvc pipe to elevate the legs with. People don't have to bend over, it's not so tiring for us sr. vendors and very rarely does a customer try to reach one of the dressed dolls.

Annieb


Micro waving Fimo: Unfortunately, micro waving Fimo won't work. Microwaves cook food in a different manner than a conventional oven, by causing water in the food to boil and cook the item through steam heat. This is why it isn't possible to brown meat in them.  The steam produced in a Fimo item would probably cause it to explode inside the microwave (same way things like baked beans and other messy enclosed items do). Also, you can't control the heat produced in a microwave, so you might be more likely to melt an item than cure it (hot spots have killed more than one tupper ware container!). Melted Fimo is *TOXIC* as well, so it is better not to chance an accident.

Kim from Canada


Angie Scarr Videos: I also received Angie Scarr's set of polymer clay videos. I have watched all of the tapes and find them very informative. Her tapes are available on VHS.

Here's the scoop: contact Dina at :    Cloak and Dagger Creations, 61 Gilson Road, Littleton, MA 01460-1300, e-mail: info@mailcloakmaker.com. Angie's web site:  http://www.angiescarr.co.uk   ( those peelable oranges).

Sondra, Missouri


Clay formula to use in making miniatures. I assume that you are talking about clay that is to be fired in a kiln?? If that is the case, I have found that the best to work with is porcelain modeling clay. I find that if you are hand building or modeling that the piece is so small to begin with that drying out quickly is a problem. But if you keep the piece of clay you are working with covered with plastic and you continually add a tiny bit of water you can very easily keep it pliable. This is what you mentioned, not being able to find a pliable clay. Porcelain does not have any grogg in it and an added benefit (at least when making miniatures) is that it shrinks in the firing up to 30%.

Gary in NH


Previous 10 | Next 10


Page 932 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)