Baking Polymer Clays: Here is a site that gives a lot of different ways to bake clay and you can even use a solar oven. It also gives a site to go to get directions on making your own oven. http://www.glassattic.com/polymer/baking.htm Marlene Chapman-Ontario |
Clay: I too work with clay and what I have found works well to sculpt tiny figures or busts is to rough out the clay and let it dry. Then carve the details. I did a tiny bust and a kwan yin figure that way. I have used low fire white clay, and porcelain and they worked equally well but the porcelain must be fired to a higher temperature. Jacqui in Hilo, HI |
Sculptamold : Sculptamold, made by American Art aka AMACO, is a paper mache/plaster hybrid, and as such has more body to it than a pouring plaster. For this reason, it can be sculpted more like a really wet clay. Hydrocal is a plaster product, with a stronger tensile strength than Plaster of Paris, thus more durable. But, Hydrocal is made to be cast in molds and as such has a much thinner body than the Sculptamold. Maybe if you let it set up a little before you tried to landscape with it you could use it, but it will start to set very fast after the initial resting time. I buy Sculptamold at a regular artist supply store. Stores that sell Department 56 sometimes carry it too. I believe it is also available to purchase online at http://www.newsearching.com/ceramics_clay/Modeling_Clay__Sculptamold__3_lbs_.html. AMACO's website is http://www.amaco.com/1998Catalog/arts_crafts/artemboss.htm A similar product to look for is CelluClay made by Activa. Activa's website is http://www.activa-products.com/ Tere Perry in Texas |
Cleaning the Pasta Machine: I don't know if this will work for you due to the "stains" in your pasta machine may be old, but I usually run a folded up wet paper towel through the rollers just like I was going to make pasta. I do this a few times changing the paper towel if I need to and running it through in different places on the rollers. I do this every time I put Fimo through it and in between the different colors as well. I guess you could also make the paper towel soapy if you need to then "rinse" it with a different towel with just water on it. Then I rub the rollers pretty firmly up and down them as I turn them to dry the wetness off--this also gets some of the stains off as well. Parisa |
Cleaning Oily Pasta Machine: To clean the roller on your "oily" pasta machine, get some alcohol swabs at the drug store and run them through the machine several times until your roller is clean. Mary Eccher |
Boiling polymer clay: Just wanted to thank whoever sent in the tip about boiling the polymer clay. I tried it last night, and did more today. It's great!!!!!! No burning, no flat spots, etc,. The best part is no fumes! I had a very small sauce-pan, that I used to heat up baby food jars when my kids were babies. I use that for the small pieces I've tried, with great success. Has anyone tried boiling for larger pieces? (I did set the timer to make sure I didn't run out of water! I think that's important.) Cindy |
Polymer Clay Safety (Fimo, Sculpey, ...et al): I love reading these digests but I haven't really had much to say until now. I've read about the interest in the safety of polymer clays. While I was pregnant, I followed a trail of links to an organization called "Arts, Crafts and Theatre Safety" in New York. Someone there gave me the following information:
For more info, write to: Monona Rossol (212-777-0062) or http://www.caseweb.com/acts/ Nancy |
Fimo: I have never boiled fimo. My specialty is dolls, and I make them out of Fimo. I bake them at the recommended temperature for 20min., then I plunge them straight into cold water. This seems to make the Fimo quite resilient. When I just left the stuff to cool, I tended to lose fingers (theirs, not mine!) and although they glue back very well it was a bother. The important thing to remember is not to bake them at too high a temperature because the fumes are dangerous. And keep the tools separate - including the baking tray (I use a ceramic tile - then you can model on to it and not move delicate pieces until they're baked). I use any wood glue I can filch from my husband, but I always use wood glue, and not just pva! At the moment it's Evo Stick, which I like. And I only use a little bit, or else it squidges out everywhere! I'm a bit impatient with glue, and an idiot with clamps, so it I'm assembling something, I'll use a tiny drop of superglue as well as the wood glue. Then, after a minute of sitting holding the item firmly into the jig, it sets and I can get on with the next bit! The proper wood glue is what I rely on in the long run, but the superglue holds it together while I'm working on it, a bit like tacking stitches when you sew. Lynne Connolly |
Boiling Fimo: Thanks for the tip on boiling clay. I have just made a face from the James Carrington book and have boiled it. Beautiful results. I also made a pie from the Mary Kalinski book on Polymer Clay and it turned out great. Boiling gives fruits a luster that is unbelievably realistic. Marje |
Bowls: I find it is easiest if you make what is called a slump mold. The mold can be made out of anything that holds up well such as baked fimo, hot glue, plaster of Paris, etc. Make the mold over your form (marble, broom handle, etc.) and then press your fimo or clay into the mold. Smooth the inside, and cut the rim evenly. You might have to powder the inside of the mold if you must remove the piece before baking it. Something like plaster can be put into the oven and it won't cause a problem. Jacqui Marlin |
| Previous 10 | Next 10 Page 933 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |