Making fimo gold: To make fimo gold, I have a wonderful gold powder that I rub into the fimo before baking. I believe this is commonly done by polymer clay jewelry makers. The metallic powders are available at art or craft supply stores.

It has been my experience that fimo reacts chemically when incompatible substances, like clear finishes, are applied to the baked object. Not all finishes are created equal where fimo is concerned! A softening of the surface of a previously hard object is a good indication that there was a chemical reaction to the gold leaf paint you used.

Anne Gerdes


Gold Paint on Fimo: You need to be careful what type of paints you use. Gold Leaf works well even on small items if you just use a toothpick or small tool to press the Gold Leaf into the crevices.

Jeannine


Gold and silver paint: I got small bottles of both gold and silver paint made specifically for Fimo and I got them at Michael's, they were in the same place as the Fimo.  I have never opened either one, can't tell you if it works or not (I'm working on it, okay?)  but it seems to me that others have experienced that no-drying tackiness with various attempts at painting Fimo with other stuff.

Pamela L. Swain


Gold leaf on Fimo: For a gold leaf effect on small Fimo and polymer clay items, try the metallic powders. They are brushed on BEFORE baking, and have a lovely metallic sheen. Fimo makes a gold and silver, and I've used metallic powders from clear resin casting and it works great and comes in colors. Without adding a gloss on the finished item it comes close to a gold leaf look.

Beverly Michie


Sticky Fimo and Fold Leaf - Ya gotta be careful with solvent-based paints on the oven-fired clays. I know that many brands of nail polish never dry when put on Fimo or Sculpey. Gloss Mod Podge works well for a ceramic-type shine. The matte version is also nice.

For an easy "gold" leaf, try Renaissance foil by Delta. The leaf comes bonded to a plastic backing, then transfers to the special glue it comes with. Very easy to use, nice effect. Comes in gold, silver, and I think copper, blue, and red.

This leaf, and I think any gold leaf, is going to reduce the detail of any carving because the size (glue) tends to fill in the low spots. For a delicately carved frame, I'd probably paint it a dark, dull gold, then apply the size and foil only to the high points to emphasize the design.

Lee


Sculpy Elasticlay: I just ordered some polymer elasticlay from http://www.polymerclaymall.com/Malls/PolymerClayMall/sculpey3.htm

Carol


Sculpey Elasticlay: I just ordered some polymer elasticlay from http://www.polymerclaymall.com/Malls/PolymerClayMall/sculpey3.htm.   I found it listed in the third column, under Super Sculpey.

Carol Giberson


Elasticlay, Liquid Sculpey: Apparently they are both Sculpey products, even though some of the labeling is by Polyform, and thy are both available on the wonderful site Dave Pierce put up for us. Neither product comes in clear, which I was hoping for, and they're both pricey, (Elasticlay is $7.19 per half pound, cream color only; and liquid sculpey is 19.99 per pint, white only). I figure they should be great for casting and molding.

Lynn O'Shaughnessy


This is the poly clay site: http://www.prairiecraft.com/

Charlean


Liquid sculpey: Just did a bit more digging. At this URL - http://st3.yahoo.net/prairiecraftcompany/tranliqscul.html, you will find Pioneer Crafts, and that is the page for transparent liquid sculpey. Also at http://www.prairiecraft.com/ you will find some tips on using Liquid Sculpey.

Dave Pierce


Previous 10 | Next 10


Page 943 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)