Cutting Brick: I was able to cut my bricks for a herringbone pattern sidewalk with a wire cutter, the kind that looks and works like a pliers. Just position the brick in the cutter at angle you desire, and the brick snapped in two at just the right place. This may not work with every kind of brick available, but worked great with the bricks from Hobby Builder Supply. Dean Jenson |
Shipping Charges: A seller on E-Bay told me it would cost $100.00 to ship a dollhouse from MI to IA. I called the Greyhound Bus Co. and found out it could come by bus for about $25.00. Mary Kay Gleisner |
Cutting Brick: According to what type of bricks you are using, cutting them varies. Fired bricks are very hard and the suggestion of using tile nippers is an excellent way to cut. If you are using bricks cast of dense plaster, they cut easily by scoring with a craft knife. The bricks that I use are of the cast type and they are exactly to scale (5/32" thick x 9/32" wide x 5/8" long). That equates to 2" x 3-1/4" x 7-1/2" in scale which is very close to a common brick. These bricks are available from most miniature stores that buy from Dee's Delights. They are made by a man in Vermont who also makes cast chimneys, fireplaces and steps. I have laid many thousands of them in the past year and find they are as realistic as possible although it takes a lot of patience laying one at a time. I use 1/32" spacing between individual bricks and between courses, which equate to a 3/8" mortar joint in full size. Garry Cosine In Lakes Region of NH |
Cernit: You can find it at www.cernit.com Valerye |
To glue net to wool (and many other odd fabric combinations as well as plastics and leathers) try Fabritac, available in most fabric stores, WalMart etc. Alice Zinn in Pt. St. Lucie FL |
eBay: Yes, negative feedback is a good incentive, but please try and work out the transaction before posting it. I sell on e-bay fairly often - miniatures and other stuff. Many times people either have a different idea of what the object is like, or they just aren't happy with it. I know that I (and many ebay dealers) would rather give a full refund with postage costs then get a negative feedback! I've had one negative ever, the person never let me know they weren't happy and what they said about the item was totally untrue, but even one negative can turn people off from bidding on your stuff. But if a dealer refuses to take back bad or misrepresented merchandise, by all means let them have it! Please ask about postage before bidding! Bidding is binding, and if you aren't happy with the postage charge once you have won a bid, it's really too late if the seller doesn't want to work with you. I agree that $6 postage and handling is outrageous for miniatures, but I think most dealers will work with you. Beverly Michie |
Cernit: It is similar to Fimo and Sculpey. The finished product is supposed to be more durable and harder than the other polymer clays. You can carve, sand and buff it. If you want to see what has been done with it, check out www.cernit.com. Valerye |
Pictures on eBay: I use http://www.honesty.com to host my images. There are several free sites available. But before storing your images you will need to have an image editor. With this photos can be resized. I use Microsoft Photo Editor. Dianne |
Cernit Polymer Clay: I can tell you that they have the most realistic flesh color but it's very soft and translucent. I've been trying my hand at 1/4" scale dolls and the color is perfect but I have warm hands and I have to keep sitting it aside to cool off and harden a bit so it will keep it's shape. Gail Dillards |
Removing Glue: Kay Gale had a question about removing dried Carpenters glue from a polished coffee table top. There are lots of adhesives that fall under the banner of "carpenter glues". Common White Elmer’s Glue- or poly vinyl acetate (pva) can be removed while it is still moist, with just warm water. After it is dried, white glue is still very susceptible to moisture and heat. You could try a damp paper towel that has been microwaved hot (PLEASE be careful when handling) and trying to soften the glue for a few moments. Then use a blunt paint scraper to try and GENTLY lift the glue's edge. Once the edge starts, the whole blob should quickly follow. Yellow Glue, or aliphatic resin- is another matter. While it is not yet fully dried, yellow glue can be removed quite readily with water. Once it has had a few hours to dry ( it will look dark orange) water doesn't have much affect on it. Since this glue blob is on a finished table top, I assume that the surface is either varnished or waxed. This is good because the glue won't have as much of a purchase on the table's surface. If you have a blow dryer, set it on it's lowest setting and heat the glue for just a minute. We are looking for dry heat in this instance. Please be careful to only do this for a very short time, you don't want to soften the finish that the glue is on! (then you WILL have to refinish!) Take a blunt scraper of some sort- a paint scraper that isn't sharp would be fine, and gently try to pry the edge up. Once the edge starts, the rest will follow. Yellow glue is very tough once it has dried, please be careful when using any tools that you don't get hurt as you try to lift the blob. If you think that the glue blob is just too big for this to work, you may have to resort to sanding it off, but I don't recommend this because few people are adept enough with a sander to not scar the surface under the glue. Brian Poor |
| Previous 10 | Next 10 Page 946 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |