eBay: I pride myself on a feedback of 300 on yahoo and 200 on eBay, and you must get tough. I'd never wait a month for anything. No excuses. Leave bad feedback and demand your money back if you don't get your item. I recently purchased a sewing machine (mini) and they said it hadn't come in yet. Well if you don't have the item - don't sell it. As for postage costs, I charge $1 for my minis on eBay and have been charged $5 for a tiny thing. When I asked if $5 was really necessary, they said they had to buy a box, etc. When it came, it was wrapped in cardboard. I felt ripped off and said so. A low price on an item might come with more handling charge than you should have to pay. Ask what the fees are before bidding. And Use the Feedback. Gail Spector |
Storing & Hardening Polymer Clays: I've been making stuff out of polymer clays for over 11 years now (mostly Fimo, but I use all brands), and it is extremely important to store conditioned un-baked clay in wax paper or baggies - it will start to eat through plastic immediately. BUT if you bake it, and haven't baked it completely, the plasticisers will slowly leech out and eat through stuff. One case in point: I had some fruits and veggies I made in my first days of experimenting. I stored them (baked) in some stacking plastic boxes – the round clear ones that screw together. About 5 years later they were stuck to the insides of the boxes - it took that long to show up. I also participated in a "bead swap" on a clay news group, where we all made clay beads and mailed them in, and got back one of each. One person's bead was beautiful, but the hole was too small for a needle. I took my mini hand drill and gently started to enlarge the hole, and the whole bead crumbled in my hands - it wasn't fully baked, but felt fine from the outside. I always bake my objects a bit longer than the directions call for, watching the oven like a hawk with light colored clay to keep from discoloring. Make sure your room is well ventilated because of fumes given off during the baking, and most important, have fun! If you have questions with clay, the rec.crafts.polymer-clay newsgroup is extremely helpful and friendly (check out their FAQ file for great info), and if I can help with questions I'm glad to - if the mistake can be made, I've made it! Beverly Michie |
Crumbly, Dry Fimo: Take that Fimo and break it into small pieces and then knead and knead it (perhaps with a little Transparent), it will soon work up and be soft again. I never knew that being crumbly wasn't supposed to happen when I first worked with it so just persevered and it soon became soft enough to use. Dottie |
eBay selling: I haven't sold anything on eBay, but have purchased on occasion. These are my observations: 1. Before someone will bid, theyneed a picture of the item. 2. A check of the feedback to see the dealer's rep. will happen. 3. If there is no history, people will be hesitant to bid, especially on something very pricey without a known name attached to it. 4. Since eBay is so heavily used now, new entries can be buried very quickly. When eBay first came on-line, I remember there being no more than about 3 pages of miniatures. Now it is well over a hundred, probably more. I end up using the search to find what I want so I don't spend 20 hours searching through stuff I wouldn't buyanyways. 5. My opinion: Slow loading pages that are graphic-intensive are death. If I have to wait while endless graphics with store logos, fancy backgrounds, music, pets, children, neighbors, neighbors' children and pets etc., are loading for something I was just interested in "browsing" anyway, I hit the back space faster than warp nine. These things are all quite nice on a personal page, but going to eBay is like going into a store -- if it is acrowded, noisy and disorganized establishment, it may drive some of us more delicate types out fairly quickly;). 6. A picture in front of the description will make me look far faster than all caps yelling at me to believe that an item is "one of a kind". Incidentally, I was watching a show about writing, all caps are hard to read because humans recognize word shapes when reading as opposed to individual letters. All caps makes all words look exactly the same shape, hence harder to read. 7. A good short description is better than a vague promise of cute/unique/special. 8. Something very big is going to cost a lot to ship, this is taken into consideration before someone will bid on an item. What sells? Got me. I have seen some of the weirdest stuff get bid on in a frenzy and some beautiful yet reasonably priced things go off without a buyer. I have been told the way to do it is to start out selling something a little smaller and less expensive first, build a good rep. and then work your way up to the big ticket stuff. Still, I don't know if it is worth it because of point number 4. Kim Bulback |
eBay: My suggestion is to post negative, negative feedback. My husband and I collect Wades from England, the miniature village pieces made of porcelain. In our buying and selling, we encountered a person who claimed that the piece we sent her was flawed. We know it wasn't as we go through the pieces under a magnifier before we advertise them. We're so convinced that the pieces were switched and her flawed piece sent back, that we started marking our pieces with invisible ink. You can only see the ink markings with the aid of a black light. Handheld ones run on batteries. When you're antiquing the black light also shows cracks in pieces. We look for Roseville, too. My point is, we notified the Wade dealers we knew and gave out the person's name as it happened too many times to be co-incidental. We also posted negative feedback and that's about the only recourse you have. It's another one of those "buyer beware" situations. Connie |
Fimo Warmer/Softener: For any one interested in a warmer for Fimo: You can make a warmer that will work great. It is made like a bean bag. Cut two rectangular shaped pieces of heavy fabric about 5" x 10". Put wrong sides together and stitch (zigzag or surge) around 3-1/2 sides, leaving just about a 2-3" opening. Turn the fabric and fill loose packed with UNCOOKED rice (not instant) moderately full (1/2to 3/4). Stitch up the opening. This rice bag can then be placed in the microwave for a couple of minutes (experiment with time) . It will heat up the rice and stay warm for awhile. Place wrapped Fimo (unless you want to stain your bag) on top of one end of the bag and fold over. This will keep the Fimo warm for about 2 hours. This could also be pre-made into an envelope shape to slip the Fimo in. These are also great to make and take with you when you need a neck or hand warmer at outside events. Debbie Laue |
Storing Fimo: It was explained to me that, until it is cured in the oven, Fimo is "alive" and will "eat/melt into" certain type of plastics. Usually it will not "eat" the soft, opaque plastics like the round containers about 1.5" tall with lids, or plastic bags. Keeping it in plastic wrap or plastic bags seems to keep it from getting crumbly as fast, even better than the unopened wrap it comes in. One hint - when you have mixed a special color, be sure to mark it some way as to what you used it for. I have several bags with several shades of color that I don't remember what exactly they were for. If I have a large quantity, I'll actually scratch the info into the clay because I've found that ink on paper bleeds when in contact with the Fimo, and I don't seem to remember to mark the outside of the bag, which would probably be the best way to do it. Marsha Heeter |
Fimo Instructions: Tom Berkner of Earth and Tree has some great books on Polymer Clay as well as all miniature related topics at http://www.dollhouse-miniatures.com/ Mary Kaliski |
eBay: I have not bought minis on eBay, but I have bought a lot of toy trains. In the case of the excessive shipping charges, you needed to challenge them before you bid with an email question to the seller. In the case of the balsa furniture, if you did not email them asking what it was made of, again that is your responsibility, especially if it matches the picture. Those 2 should get positive feedback, perhaps with a nice questioning email to them privately at the most. The third one, I would email them and tell them that it was only mailed two days prior to receiving it, and you don't want to post a negative feedback, but you want to know what really did happen. Based on their answer, or a lack of one, post either negative or neutral feedback. If we don't keep eBay honest it will not work for us. Barb Jones |
eBay Tips: 1. I always start my eBay auctions on Thursdays and run them for 10 days. That way I get two weekends worth of shoppers bidding on my wares. 2. Also, if you get more than one bidder, contact the "losers" and offer them a comparable item at the price they were willing to pay. That turns one sale into three or more. 3. If you don't get a bid the first time, re-list the item on the next Thursday and do it again. Sometimes, with all the stuff available, your item gets overlooked and re-listing it gives it another chance. Be bold and raise your price on the second listing. A couple of times I've gotten emails from bidders saying, "Hey, I saw this last week and it was cheaper. Will you sell it for what you first asked for it?" Well, yeah, duh. I think some folks wait to see if the price will go down... 4. Also, don't forget the add-ons: the "featured item" and "gallery" listings will raise the likelihood of someone seeing your item and checking it out. I usually pay the extra fee when the item is expensive and the minimum bid will cover the additional charges. 5. I have also learned that the more often you list items the more likely you are to get bids. I think this is because shoppers see your user id, start to recognize it and feel you are more trustworthy. Sally Cook-Thomas |
| Previous 10 | Next 10 Page 948 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |