Fimo Warmer / Softener: You can make your own Fimo warmer, just fill a white sock with regular white rice and sew it up. Use it for pains. It works great.

Mel Varisco


"Chuck"&"turn": That was my offering RE "chucking" in a Dremel and "turning" with an emery board.  I'll cut a real quickie now and if you would like further info, respond direct to me and I will compose a more readable text.

The Dremel tool holds things such as drill bits, tool shanks, etc in a clamp called the "chuck." It is a split cylinder that clamps down on the inserted tool as the nut is tightened over it. USUALLY, it is a tool that we put into the chuck of a Dremel tool, electric drill, router, or other machine. With my suggestion, you would put the piece of wood into the chuck. Hence, "chuck a piece of wood doweling". OK?

Turning is a lathe term. Usually a tool moves while the work piece is held still. For example, you hold a piece of wood in a vice and chuck a drill bit into the chuck of an electric drill. The electric drill makes the bit spin so that it cuts a hole through the wood. With "turning" you move the wood while the cutting tool holds still. In our example, you would have the Dremel tool spinning a short piece of wood dowel. Hold a manicurist's emery board lightly against the spinning wood and it will be quickly reduced to a smaller diameter. O.K.?

With things like wood doweling, this only works for very short pieces of. Under 3/4 of an inch long is best. When longer material is "turned", a real lathe machine is used which supports both ends of the wood while it is spinning so that it cannot bend or flex away from the cutting tool.

If you have a Dremel Tool, take it to your hobby supplier and have them fix you up with the full range of chucks. These come in 4 different sizes to hold different size tool shanks or materials from almost hair sized to about 1/16" diameter.

Mel in Las Vegas


POWER TOOLS: The 1st thing to know is that tools are not gender oriented, however, sometimes we are! Don't let this hold you back from a dream!

The 2nd thing to realize, and you already do, is that there is enough power in those tools to cause some REAL damage! Respect them! Congratulations, you have mastered step one!

3rd in this series is too start small, say a drill or power screwdriver of some kind. Rechargeable tools, which may cost a little more but are worth it, allow you to not fight with the cord and outlet, which usually is too far beyond the project needing the work! Don't forget to pick up the accessories kit(if not included) that have different sizes of attachments. Go around your house and check for loose screws, (these will not be found in your head!), a picture that needs hung, curtain rods that need tightened, etc......

That leads to the 4th step.Try a simple project for your home. Like maybe, a small shelf that the lumber yard could cut the wood you to the size you need and you would assemble.

5. After your newly discovered talent has raised your confidence level a few notches, you might try to visit a store to get some simple building books, sawhorses, tables (which you will use over and over again), planter boxes and benches come to mind.

6. Visit a store that sells power tools and ask for help in deciding what tools you would like to use next. Maybe a router(with bits), or a small bandsaw (don't forget the x-tra blades, cause you will break a few!). Bandsawing is has a lot in common with a sewing machine in the way you maneuver the wood/ fabric. A bandsaw can also be used a WHOLE lot in miniature making! Don't let the salesperson talk you into the top of the line model for professionals(not yet anyway), tell him you will be back for those in the near future. Sears in USA have some great and simple equipment to offer.

I think at this time, your mind will start clicking on how you can do things both in full scale and miniature.

Lisa, Martinsville Indiana


Tools; I've noted a lot of you talk about tools and not knowing what to do with them. I think most women are in the same boat. Men seem to have been born with the knowledge on how to use tools. Don't fear! You too can learn. When I was first married I was so ignorant about tools, that it was, well, embarrassing. I even thought all screwdrivers were supposed to be rounded on the corners. You see, my father was a painter and all of our screwdrivers were worn from opening paint cans. Now one of my prized possessions is a cordless screwdriver that I use constantly and not to open cans with <grin>.

Dremels-I prefer the variable speed one. I have several that I have set up for various uses. I have a flexible shaft that I put those tiny little burrs in to do carving, or the drum sanding disks to do sanding (I use lower speed for this). I have a couple in drill presses that I use for different things. One is set up to drill tiny holes. Another in the drill press I have put a fence (flat stick) along the back to run boards along. That way I can make a piece of molding, route a groove, "plane" a board, make fancy furniture joints called mortise and tenon (like slots and tabs) all with that silly old dremel. I've even used the lowly old dremel in the stand to make incised carving such as in my Connecticut sunflower chest and court cupboard. I've learned all that from practice and from books on full sized tools and from watching more experienced people.

Now as to the band saw. This tool is not for the light at heart. Remember that the band saw is what they use to cut meat and bone with at the grocery store. YOU MUST RESPECT ALL TOOLS! BE SAFE! A band saw has a

continuous blade. It is good for cutting things on the outside. You can't cut say the middle from the letter "O" without cutting through the side of the "O". The width of the blade also determines how little of a circle you can cut. In other words if you have a 1/4" blade you have to make a bigger "O" than you can with a 1/8" blade. Now you can do mini work with it, but it is harder than with a saw like the dremel scroll saw. I have cut cabriole legs (the kind with "S"es on two adjoining sides) on a bandsaw, but I don't recommend it. The blade is too close to your fingers. Didn't mean to write a novel here. Just wanted to pass along "Girls can learn too"

Shannon Moore


Dremel: I have several Dremels including the cordless which has it's uses.

But.......my favorite is the Heavy Duty Flex Shaft. I have a Flex Shaft Stand that clamps to my worktable, extends from 12" to 42" that I hang the Dremel from. This is connected to a Foot Control Pedal. So........The Dremel hangs at the right height for me to use inside or outside the dollhouse or on any other project. I usually leave the stand extended so that I can reach the Dremel to turn it on, but the handpiece is the right height to reach the project.

Fannye in TX


I like to cut the decorative ends off decorative toothpicks and use them for hanging pegs for coat racks, etc.  They also make cool 1/4 scale furniture.  I use the cut off portions for making wood "nails" in my "log" furniture or for mixing epoxy.

Beverly Michie


Household Accessories from assorted Plumbing Supplies: For the flat circular metal filter: cut out a small square about ½" X ½". Wrap thin wire around the edge and glue. Leave an extra 1" to 1 1/4" length at the bottom. Twist both lengths together for a handle. You have a fly swatter. You can paint the handle if you like.

There is another filter that is shaped like a colander. Wrap wire around the rim of the "colander". Make the 3 legs out of bent wire. Fold the top edge of the filter over your wire and glue.

There are also various sized black stoppers that when turned upside down with a stick glued inside, look exactly like a plunger. A word of warning though. Don't try to hollow out the bottom for a more realistic plunger in case someone wants to look underneath. I used a Dremel and it makes a horrible black sticky mess which gets everywhere.

Annie


Plumbing Supplies: I was tickled to see the one about making a colander out of the mesh. I've been trying to come up with a way to make mini mesh tiered hanging baskets (the kind you hang from the ceiling in your kitchen to store onions, fruit, etc.). Instead of attaching feet as you did to make a colander, why couldn't one attach tiny chain to the rim, connect three of them (possible they come in different sizes?) and hang them from the ceiling for your mini onions, etc. I'm heading to the hardware store this afternoon.

Linda Roebke


Ebay: I buy on Ebay all the time. Please, if you don't get good service or good merchandise, please leave negative feedback. It is the only way to be protected and to protect others. If you get good service, please also leave that feedback. I have negotiated with the seller if I thought the shipping was too expensive. Just ask. I have had very good luck on Ebay. Keep trying.

Sheila


Shipping Charges: In addition to the minimum postage of $3.20 or about $7.00 UPS, we must also allow for our time in driving to the post office or UPS center, standing in line etc. Then there are just the small things that add up like shipping labels, adhesive tape, foam peanuts or other packing materials, not to mention the time required to pack the order and the cost of the box. I agree with Deb, $7.50 is a bargain.

Dean Jenson


Previous 10 | Next 10


Page 949 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)