I sell a lot of miniatures on Ebay. My policy is that it is returnable if the buyer is unhappy. I usually charge $1.50 shipping on items that can be shipped in a padded envelope. That covers the cost of the envelope and the $.55 postage that it usually takes. A lot of the sellers on e-bay are dealers at miniature shows. When I buy, I do check the feedback for sellers and won't bid on items that are offered by dealers with bad feedback. I would hope that people would not rush to leave negative feedback without trying to work it out first. Sometimes the post office is to blame. Sometimes it is difficult to match up payments with the item if there is nothing to identify what the payment is for. Sometimes buyers simply send a check with no Ebay number, no description, e-mail addy, and no way to identify it. I hope that those of you who have never bid on anything won't be afraid to bid. It's a fun thing. You just need to use common sense.

Kathie


Ebay Shipping: As an Ebay seller I work very hard to maintain a good feedback file. I don't believe people should charge for handling. I charge $3.20 for priority mailing. The trip to the post office is my part for doing business. The post office gives you free priority boxes. I, too, was so offended when I ordered a disk for $2.95 and was charged $6.00 for shipping, and noted the person only paid .78cents for postage. I never did business with that person again.

Tina Richardson


Shipping Charges: Did you know that the US Post office will send you all the priority boxes, in different sizes that you need? Also all the tape and labels you can use. My husband sends a lot of things and he keeps the majority of his packages at $3.20. The miniature I saw to be shipped for $7.50 wouldn't have even cost $3.20 to send. My husband is the greatest packer I've ever seen and I'll bet he would have shipped that item for $2.00. After 500 or so feed backs from e-bay no one has received a broken product.

Debbie


Pillow tip: Be very careful about filling your pillows and cushions with flour, it absorbs humidity and becomes stiff and stained (I know!!!), plus it attracts JOJOS (South African word that describes any kind of insects). I found that the sand used for swimming pool filters is excellent, if not salt with a few grains of rice (to absorb humidity); the advantage is that it is not stiffening, making the article softer.

Mirta Fitzgerald


Shipping Charges: I don't take into account the time I spend packing when figuring shipping costs. My personal feeling is that's what my profit on the merchandise is for, paying me for my time. For small packages, the greatest expense is often insurance. Therefore, I insure a package for what it would cost for me to replace it wholesale and not on the retail cost. I use recycled materials as much as possible. A pretty cotton filled box is lovely but costs about 40-50 cents and when possible I use a free film canister and line it with bubble wrap. Just as effective, not as pretty, but saves the customers "handling" costs. You can get the canisters in any store that processes film. They look at me weird when I ask for them, but willingly give me all I need. When sending priority, I use the free materials from the post office. After getting packages with $2in postage on them and being charged $7 for shipping, I have stopped buying from these suppliers and I let them know why I have stopped doing business with them. In my opinion if there is more than $1 difference between the actual shipping costs and what you paid you should complain. $1 should cover packing materials unless it's an unusual item. If you want to bid on something on eBay, you should negotiate a lower shipping cost with the person before bidding and tell them to go to the USPS web site to do a calculation.

Carol


eBay Sellers' Starting Bids: To determine your starting bid: Figure out what the piece is worth to you, add to that price whatever costs you incur for packing, be it chips or bubble pack, add to that any costs that you have incurred from eBay for listing the piece (and if you'd like to charge for the gas it takes for you to go to the post office, or travel to ups, or if you have a carrier pigeon that is going to personally deliver it =), add this and any handling costs to the price you want for the item, and then this total is your starting bid... or your reserve price if you want it to be a reserve item.

Susan


Pacifier & Baby Bottle Nipples: I thought it would be a hoot to do a pacifier that actually looked like one. Below are some approaches I thought might be worth trying:

  • A brass wire dipped in resin (pre-tinted with tan resin coloring)(or painted with "glass" paint).
  • A small tapestry needle dipped in clear caulking and then peeled back off the needle to create a hollow center (can caulking be tinted tan?) (can caulking be smoothed on or peeled back?).
  • A cut-up latex glove, heated and stretched over a plastic/nylon filament (one of those price tag thingies that you stick in glue bottles...some of them have parts that are nipple shaped).
  • The same filament as above but dipped in a champagne colored Gel-o candle (if I can still find one at Linens N Things).
  • Elasticlay (I've never seen it; is there a "transparent" version, as in Fimo?).
  • Transparent poly clay mixed with a bit of tan, supported by a sturdy wire.
  • Shrinky Dinks - colored with tan pencils. I know I've got some somewhere.
  • A Lucite rod (if they come that thin) dipped in that vinyl stuff they make to dip tool handles in.
  • EZ Water (isn't that the one people said turned yellow and stayed lumpy? If so, it sounds perfect...), or
  • Scenic Water - (can these products like this be molded? dipped? colored?).
  • Sue Thwaite's Water (can't remember the name).

Lynn O'Shaughnessy


Tools: For anyone looking for a huge variety of tools to work with i.e. scissors, tweezers, files, that sort of thing, this is a good place to go. http://www.widgetsupply.com/

They also carry Dremel accessories and jeweler's tools. I'm not associated with them, but have ordered from them. My order came on time and was complete. The prices are very reasonable, or at least I thought so.

Circle cutter: The circle cutter at Michaels looks similar to that which I bought through Creative Memories (the memory book shop-at-home folks). I LOVE this product, and don't know how I EVER did without something like this for making prom decorations, etc. Yes, you can use it on cardboard, foamcore, etc. It takes a little scoring but VERY effective. Inside is a little knife cutter that you break the knife nibs off of as they dull. Then you simply replace with a cheap new one inside the cutter.

Wendy, Elk Grove, CA


Videos on Tools Usage: Dean Jensen emailed me and told me about the Anker videos on small power tools he used to sell that are carried by Smaller Than Life now.

Quinn


Circle cutters: I have used a circle cutter. They do work, but they can be tricky. The problem is that if it slides at all, there goes your circle. It usually takes more than one try for me. I should think that it would cut matboard and thin cardboard, although you would have to make several passes to get all the way through. And you might have to change your blade more often. So yes I think you might like it, but its not going to be all peaches and cream. I would suggest trying one out before you buy it, if that's at all possible.

Kellie


Previous 10 | Next 10


Page 950 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)