New Tool: I just received a new tool from Micro Mark that I'm going to love. If any of you have the Chopper this one is a terrific improvement. It is heavy metal. And the thing that kept wearing out on my others is the bed that the blade cuts down on. This one has a replaceable cutting field. It's one of those green self healing cutting mats that fits into a recessed space. I LOVE this tool. Of course I haven't used it yet. But it just makes sense. It is advertised in Dollhouse Miniatures and in their catalog. Now maybe after I actually cut something with it I'll tell more. The chopper was one of my first tools besides the Xacto knife and I really used it a lot.

Fannye in TX


Tools: All this talk about tools makes me a little jealous...I have built somewhere between 25 and 30 houses and 100's of pieces of furniture, both from kits and from scratch with my meager little tools....

a razor saw
coping saw
various size craft knives
fingernail clippers
wire cutters
and the all time standbys; clothes pins, straight pins and rubber bands!!

Jo


Tiny, tiny nails: There is a wonderful product on the market called a "Push Hammer." This looks very like a brad pusher with a big fat handle that fits in the palm of your hand ( It IS a brad pusher). Not expensive, but it allows you to put those tiny nails into the slender snout- place them exactly and "push" the nails into place. No slipping, no pounding. The best nails for this are steel as the inside of the "snout" is magnetized. But with some careful handling it will work for brass too. I sometimes use a tiny dab of tacky glue on the nail head to keep it inside the "pusher." Cleaning it out with a toothpick is easy.

Judie - Daytona Beach, FL


Simple tools: Jo mentioned that she made her many houses with only simple tools. I was glad to hear it. I'm working on my seventh house now (4 kits, 3 rehabs), and I only use simple tools too. I have a jig saw that I've used for one house, but otherwise I use mostly glue, masking tape, paint, small saw and miter block, glue stick, and sandpaper.

Pam G


POLISHING WHEEL: great item to have but BE CAREFUL! those wheels with the polishing compounds on them take the metal down really fast! that would be especially true of some of the mini metals. Don't push (let the wheel do it's job) and do a little at a time.

Ana


Tool tips: If you have access to a bench grinder, you can buy a spindle shaft and buffing wheel to put on one side. I use jewelry compounds on the wheel and buff any metal pieces I want to shine up. You can also use small buffing wheels on a dremel tool with the rouge compound they sell. Clean metal with soapy water afterwards to get rid of the polishing compound. This works especially great on copper, brass and silver.

Other dremel uses: I use mine for so many thing, it is hard to list them all. I especially recommend the add on chuck that is available for the newest models. (It is better than the old chuck that they used to make that fit into a collet- this on screws right on.) This eliminates the hassle of using a chuck key and collets and makes changing bits a snap.

I use the STEEL CUTTERS for woodcarving, they make it easy to take out large amounts of wood quickly. I use the one that look a like mini saws on gourds- they cut partway into the shell...I can finish cutting all the way through with a knife, or leave the cut as a decorative accent. I have also used these bits to modify resin figures- you can remove unwanted accessories and carve on them to make them more appropriate for your use. Smooth out afterwards with a sanding bit and repaint your figure to finish.

Use DIAMOND BITS to carve or grind soft stone. You can also drill and smooth glass. These need to be run with the bit wet or oiled to keep the bit cool while you work.

Use STONE CUT OFF WHEELS to cut metal. If you have a nail sticking out of a piece of wood, you want to cut an opening in a can, etc., this is the bit to use. The wheels are very fragile, so it is especially important to use eye protection to avoid injury from broken discs.

Use STONES for grinding and smoothing metal, sharpening chisels, and other tools. Can be used on other materials, but works best on metal.

Use SANDING DRUMS and wheels when you want to remove soft wood quickly or give a quick smoothing over. Not great for flat surface sanding because they are so small, but perfect for irregular or hard to reach curved areas. The discs will leave a circular pattern, so they aren't good for finish work.

BUFFING WHEELS and compounds finish the job on plastics and metal. Use them to remove scratches and finish edges.

DRILLS are handy for the obvious reasons. You can get ultra fine drills especially great for use in minis.

ROUTER BITS should be used in conjunction with a drill press or router attachment. I use them to put fancy edges on table tops, etc.

Sorry to be so long winded, but I can't imagine how anyone survives in minis without one of these tools!

Bonnie Gibson - Tucson, Arizona


Gold Plating. For the Cinderella Carriage I carved all the metal fittings in brass then gold plated them using a plating pen kit. The kit is available from Rio Grande Jewelry supply house.

The pen plating set is a bit les expensive than a regular electro- plating outfit but it is still an electro-plating process. A hard felt tip is soaked in the plating solution and is placed in the end of the pen which has an electrical hook up to the transformer. A second electrical connection is made to the part. When the pen felt tip touches the part an electrical current flows and it lays a minute layer of gold or nickel on the part.

Before plating with gold you must plate with nickel. This keeps the brass from turning the gold plate pink. Nice thing about the pen set is it uses less (no cyanide) toxic chemicals. Even so it is still toxic so caution is demanded to be safe.

Also it uses acid washes which need to be used in well ventilated space. Even so all my bare metal parts of my equipment have a brown tone to them. Just like the old gun browning or bluing. The lower cost of the pen is still on the high side if you are only using it for one small project.

Bill Hudson, Eugene, Oregon


Pin Setting Tweezers: Thank you, Mary Lynne, for remembering the pin setting tweezers and Pam's method of attaching hinges. A couple of key points: It is always best to pre-drill the holes and pre-fit the hinges. Use a small handheld pin vise, not a Dremel or power drill. The Roo MPG glue is less messy to use than epoxy and works just as well. When dry, clip off the ends of the pins with nippers. Check our web site for pin tweezers, micro pin vises, Roo Glue and Nippers. Sorry, there is no instruction sheet, just watch for classes.

Pete Boorum, On Sebbins Pond, Bedford, NH


Rouge--Sears has had a "rouge kit" for years, although don't quote me as to whether they still do. I bought mine about 10 or 12 years ago. But, the "kit" comes with 4 bars of rouge: Black, which is the most abrasive of the polishes, and is sometimes called "cutting rouge"; Red rouge, used on stones, and other hard items; Brown rouge, used for plastic, bone, brass, copper (softer metals), ivory, etc; and white, which is for the hardest metals such as chrome. One would use the black rouge, initially, to remove the larger and deeper scratches...but not _too_ much, as it will remove material and deform the surface if polished too aggressively. Then one would move on to the others, brown rouge being the most universal of the four, enabling a bright, mirror-like surface.

Another great use for rouge, particularly the white or black, is to rub it on a leather strop for sharpening blades. I use to help keep an edge on all of my carving blades. I have a leather strop attached to a piece of wood, shaped with a handle. Rub the rouge on it, and draw the blade _away_ from the edge, keeping the angle at about 15 degrees for an X-acto, a bit more for knives, depending on the toughness of the material they are expected to cut. (I give classes in sharpening at the local wood carvers club, on occasion.) It polishes the edge to a mirror finish, and keeps it extra sharp...shaving sharp!

Dave Pierce


Woodworking Supplies: Cherry Tree Toys - Hobby and woodworking supplies. Outstanding company. I've been dealing with them since they first began 17 years ago.... http://www.cherrytree-online.com/

Judie


Previous 10 | Next 10


Page 951 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)