Removable Glues:

1)"MUSEUM WAX" is clear wax and is made by TREVCO in San Marcos, CA 92069. They have a toll free phone 800-959-4053 and a web site http://www.quakehold.com This is my personal favorite and we actually use it for some of our exhibits, in the deYoung and Getty Museums.  Some regions of the country may know this product as "QUAKEHOLD!" or as "COLLECTORS' HOLD".  It is non-acidic, non-toxic and reversible--great on glass and ceramic and does not mark or stain wood. It comes in giant jars.

2)  "QUAKEHOLD MUSEUM PUTTY" is also by TREVCO and is this company's original product but its consistency is more like putty and it has a neutral/creme color.  It is also reusable and non-toxic but is NOT recommended for porous, felt, fabric or newly painted surfaces and sometimes leaves an oily residue. I use it on vases and figurines and to anchor pictures (mini and regular) to the walls.  Here it comes in pieces in flat packaging.

3)  "QUAKEHOLD!GEL"  is also by TREVCO and is just what it says it is a CLEAR GEL..  I find that it works best for glass and crystal.  It comes in a clear jar with a white top.

4)  "MINI-HOLD" by Handcraft Designs from Haafield, PA 19440 is also a wax adhesive and comes in small orange tub.  Personally, I don't like the consistency as much as Museum Wax but each of us is different. 5) "MOVEABLE MINIATURES GLUE" is  a liquid and is more difficult to find - ---comes in a bottle just like nail polish with a brush.  I use it on my smallest, most delicate items and have had no problems with glass, metal, plastic or wood and it remains tacky for about an hour so you can change your mind.

Sara from Corte Madera


Rotozip: Yes, I have one. I use it occasionally. If you want to cut a straight line, I find the best way is to hold a scrap on wood, pushing it down against the work piece with my left hand, and use my right hand to move the Rotozip, keeping it pushed tight against the scrap piece. Proceed slowly and with deliberation.

Tom Berkner


Cutting foamcore: I have a full size table saw and I use it to cut foamcore. I just use the blade that comes with it and have had no problem. You just have to allow for the thickness of the blade when you are butting your foamcore against the straight edge.

Elizabeth


Removing excess glue from wood: When I took a millwork class I was told to never wipe off excess wet glue. Wait until it dries and then gently scrape it off. Using chemicals allows the glue to seep into the pores of the wood and prevents stain from working evenly.

Jacqui in Hilo, HI


Flush cutting saw: For all wanting to know about the flush cutting saw, the one I use is made by Zona and available through Dee's. It has 16 teeth per inch with a .012" thick blade. The blade is flexible and the teeth have no set so they will cut off dowels, plugs, and pegs flush without marring the work surface. It cuts on the "pull" stroke. It doesn't have that extra ridge on the top of the blade like the blades we use with our X-acto and Excel handles, so it cuts "flush."

Jackie


Flush saws: I think what is being called a "flush saw" is a Japanese saw which is used to cut flush with the wood surface. The saw is flexible and some have teeth on both sides of the blade (small and smaller teeth). The saw has almost no kerf to speak of.

DrBob, Delray Beach, FL


A tool tip: When cutting wood, metal, plexi or whatever with a saw blade, the thinner the stock you are cutting the more teeth per inch of blade you must have to achieve good results.

Barb Jones, Cupertino, CA


Cutting Plexiglass: I have cut Plexiglass on a band saw. First I put a strip of masking tape in the approximate area I want to cut. Then I draw my cutting line ON THE MASKING TAPE. Then I cut on that line. Repeat the "tape it, mark it, cut it" steps for all other cuts desired. The tape seems to keep the Plexiglass from chipping along the edges. After all the cuts are made, remove the masking tape and CAREFULLY sand the edges. Don't sand the surface, it scratches easily! Dry fit the Plexiglass to the place you want it to go. NOW remove the clear plastic that came on each side of the Plexiglass and put it into place. If you are going to glue it in place, test the glue on a scrap first. Some glues will cloud the Plexiglass - some kind of chemical reaction.

NOTE: Be sure the table of the band saw is clean and smooth. Sharp scraps from previous cutting or sharp parts of the surface can scratch the Plexiglass. (My DH cuts aluminum sometimes on our band saw, so I tape down poster board to insure a clean, smooth surface.)

Ann in AZ


Cutting Plexiglass: To cut Plexiglass use a table saw. It's a good idea to put a drilling and tapping fluid on the blade (unplug the saw cord first!) to reduce friction. I always use a full face mask when I cut it as the "sawdust" does tend to sting when it hits your skin because it is hot. It does snap like glass if it is the thinner plastic. To score the line use the back of an X-Acto knife blade - probably the heavier model would be best.

June in London Ontario Canada


Cutting Plexiglass: I've been cutting Plexiglass using my cordless circular saw. It comes out perfect. I cut it in varying lengths and widths to use on the walls of my real house. I am slowly repainting and I realized that where I put the pressure gates in the doorways to keep the fur kids in or out, the wall gets imprints or the paint gets scraped away. So, I paint it nice and then screw in a nice piece of Plexiglass where the gates go. I do the same on my bedroom door where they scratch to get in.

Kathy Henry (South Florida)


Previous 10 | Next 10


Page 952 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)