Airbrush: I have several different airbrushes. The only one that I have found useful in minis is the Visions system by Testers. They use a special water clean-up paint that costs about the same as Builder's Choice. Lots of colors and of course you can mix them. It is useful for general painting, not for artwork; it only has general control, kind of like the one you would use to paint your car, only smaller and neater.

Tom


Airbrushes: It's one of the most interesting and fun painting tools I know, and I've been using them since the mid 70's. I have 6 now, mostly Thayer & Chandler, plus a couple of Paasche (Including the Paasche AB, the absolute best instrument made) and a Badger. The Paasche AB is what I use on miniatures, giving smooth color gradients on some of my critters, such as the Cedar Waxwings I make. They have 6 colors each and most are very smoothly blended on the bird. And the AB is super easy to clean, and can run virtually any airbrush medium...including lacquers. But enough about that. I use the previously described air compressor -- the one with the reserve tank that goes on every now and then, wakes the neighbors, keeps me awake on late illustration jobs, and was cheap at the time. Works fine. You can also use CO2 tanks...I even knew an artist that used oxygen! When he came in with a hangover, he'd take a couple whiffs of that and was just fine! LOL

Dave Pierce


aluminum flared glasses: There is a tool at the hardware store designed to flare the ends of copper tubing for water lines. It also works on aluminum and brass. Get a piece of 1/4" tubing, flare the end, use a tubing cutter to cut it off at 3/4" long, and put a bottom in with a dab of glue. You can have all the flared glasses you want, even colored with glass paint.

Rebecca in Texas


Picture Frames: I make and sell a lot of picture frames, at least 500 a year.  It is my experience that it is difficult for most people to make acceptable frames.  Some reasons:

1.  The picture frame molding that Northeast Scale Model makes is basswood, which is soft and easily compressed.  Be sure to use a sharp tool.
2.  You need a stop to make the frame sides accurate in length. Measuring alone is pretty difficult.  Use a clamp of some kind on the miter box fence.
3.  In order for the miter boxes to allow a blade to slide there is need for clearance.  That clearance, if only a few thousands of an inch, can tip the saw enough to change the angle.  Try and saw with a gentle easy motion.  Let the blade do the work. 
4.  You need a quick setting glue and a square guide to assemble the frames.  I use an Olfa cutting mat with a grid pattern.  Let the glue set a little bit before assembly so it sticks right away as you line up the frame against the grid.  Roo glue for wood works fine and so does Weldbond.

Because I make so many frames, I designed a special sliding table for my Preac saw with two fences, 90 degrees apart and a clamp stop. I bisect the angle with the saw. Go to http://www.nh.ultranet.com/~smallife/miter_table.jpeg for a picture of the set up.  If you have any table saw you could make a similar set up.

Pete Boorum


Dremels: My favorite "Dremel" is one I got from Sears during one of their many sales and at a much lower price than you can buy them for at a most other places. Their tools are Sears brand - supposedly made by Dremel but with the Craftsman name on it. It came in a nice carrying case with slots for accessories. All Dremel accessories fit the tool.

It has some great features. The one I find the most important to have is variable speeds. Woods, plastics, metals all should be cut at different speeds. The second feature (that is an-add on available for many Dremel models) is a keyless chuck. I used to get impatient switching from bit to bit and searching for the chuck key, the right sized collet, etc. Now it is a snap to switch from drill bit to cutter, etc.

I use my Dremel tool almost every day! I do multiple kinds of crafts and find this to be one of those "can't live without" tools. I use the high speed steel cutters to carve on gourds and wood, the grinding stones for working on metal, the sanders for anything wood, the cut off wheels for metal, buffing wheels for jewelry, plastic etc, etc. You are only limited by your imagination. The expression that office people use is "thinking outside the box" or something like that... (sort of like seeing minis in a button or other weird things.)

I also own a Foredom tool with a flexible shaft. The Foredom has lots more torque than a Dremel, so it seems to work better with a flexible shaft. (I don't use the flex shaft on my Dremel.) I use the Foredom for woodcarving and stone carving, working on things that require me to run the tool for multiple hours. It keeps your hand from getting cramped or overheated. It costs much more than a Dremel, so it isn't a tool for a casual user.

Bonnie Gibson


Dremel Cords: I also have one of the older models with a cord. To solve the problem, I use one of the clamp attachments with a spring rod that were made to attach to the ironing board and keep the cord out of the way. Works great for the dremel and is east to transport.

Becky


Starting with Tools: You need tools, instruction and practice to develop skills. You may need talent for some things, but that talent is often hidden under the veil of ignorance. Working with someone who has a skill and the right tools will unleash talent with practice. Find someone who knows how to use a Dremel and ask them to show you how to make something with it. Your teacher will love showing you and demonstrating a skill. Then you will need to acquire tools and practice, practice, practice.

My advice to those of you who get discouraged or can't figure out how to use a Dremel, turn a leg, wire a room or use an air brush is to join (or start) a club if you can. Most people who have developed skills enjoy sharing them. It is possible to gain skills in a vacuum, but needlessly hard in most cases. As far as talent goes, you may discover that you have plenty of hidden talent once you have developed a skill.

Pete Boorum


Dremel: I have both the cordless and corded models and find that the corded has much more power. In fact, best results are when using a motor speed control unit. This gives much more control depending on the project. Needles to say the cordless is much handier to use.

Lexie


Learning to use tools: For videotape instructions on tool usage, and many other topics including dollhouse tours, N.A.M.E. has lots of videotapes you can borrow. If you are not already a member, this would be a good excuse to join.

Dean Jenson


Inland band saw: The Inland saw does not come with a wood cutting blade, but one can be ordered. Beyond that, I know nothing!

Wood blades have more "set" to their teeth, so they cut a slightly wider "kerf" out of the wood. This aids cooling, keeps wood from burning, etc. and is rather important. Metal and glass cutting blades have much less kerf. Please spend the money on the right blade, for whatever saw you use.

Barb Jones


Previous 10 | Next 10


Page 956 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)