Battery saw: I just purchased a black and Decker cordless saw. It is great but noisy, I got it at Wall Mart for $49.95. Then yesterday I decided to go ahead and get the Makita Cordless saw I ordered two weeks ago. It is much better than the Black and Decker for my arthritic hands, the safety is easier to use and it is quieter and has more power. I had to order it and they hit me with full price. I think I will set up the B&D for a table saw, put in a separate switch and tape the safety switch open. If you get the battery saw be sure to get extra batteries to be charging extra while using one. (or two for B&D)

Second hand Rhoda


Black and Decker Sander: Someone mentioned buying a Black and Decker Screwdriver at Wal-Mart so thought I would mention that they also have a great sander for us miniaturists - it is called the Mouse and is also by Black and Decker ($39.95). The shape and size is perfect for us in every way!

Sheena


Chuck and turn:  At the end of a Dremel moto tool opposite the end where the electrical cord is there is a device to hold tools like drill bits. It is called a chuck. There is also a chuck on the business end of any drill, electrical or not- a drill press or a lathe, to name just a few. There are many types and sizes of chucks, but in each case a chuck is a device to hold either a tool or a workpiece (such as wood or metal you are working on) in the tool so you can work with it

So, to chuck a piece of wood (in this case perhaps a dowel or toothpick), is to stick the piece of wood in the chuck to hold it tight. Then, as the Dremel turns or revolves(in mid air if necessary), the miniaturist suggested that you use an emery board leaning against the wood piece to sand it down to size. As the tool goes round and round with the piece of wood in it, the emery board can be held still against the wood and it sands it evenly all around.

Barb Jones


Black and Decker Mouse sander. It is a little bigger than a computer mouse and has a nice weight and feel. It is shaped a bit like a small iron with a point for getting in to corners. I really like it, I got my entire shell sanded in about 30 min and it is not too loud.

Jeannette in San Jose


Tool Holder (for real tools): I took a regular piece of 2x2 about two feet long and drew a centerline down the length of one side. Then I marked off locations every inch. I drilled these out with a 3/4"spade drill bit. Drill only 3/4 of the way through. That makes a bottom to keep tools from falling through. This is set at the back of my bench and I keep all my tools I am using for the project in the holes. One handle of pliers will fit in a hole and you can see what kind of pliers or nipper is there as the jaws are up. Also works great for small files, knives, screwdrivers, paintbrushes, tweezers, scissors etc. All are handy to reach and put back. It takes a little practice and determination but it works. So simple.

Bill Hudson


Space on the workbench: Great tip Bill, to keep your tools that way. An other thing that I find very handy: usually I have an extra piece of wood (e.g. 6mm MDF) on the bench and work on that. When I suddenly need the bench for something else, I only have to lift the piece of wood with everything on it and put it aside (often the bonnet of the car LOL) without disturbing what I'm working on. That way you're back to it in no time without disturbing your pattern of laying out things.

Dorothee, Katikati


Hobby benches: Build a case as if you were building a cabinet for shelves. Install wooden cleats where shelves will set. Cut shelves to fit loosely and do not anchor down. Slide out each shelf and apply lips around the sides and back of the top. Cut or nail a pull on the shelf. Now these shelves can be pulled out and placed on your work surface as a little workbench top. If you need to stop in middle of project and start on another, return this one to the case and pull out a new one to work on.

Bill Hudson


Tool Holder: I took 15" long pieces of 2 x 4's, and made three alternating rows of holes - large, medium, small and even a row of teeny (corsage pins) Using stick on lettering I put names on them to use as silly Christmas gifts.

Dawn


Glue gun Alternative: For shingling dollhouses and outhouses, wishing wells, etc, I use a glue pot, with a skewer for application. I have too much arthritis for a glue gun, all the scrap glue goes back in the pot. I have seen smaller glue pots in the craft section of Wal-Mart.

Rhoda Conley


Aleene's Removable Glue: I have had very good results using the removable glue made by Aleene's. It is called Aleene's Stick it Over and Over. It is not supposed to leave any marks on surfaces. I have only had problems with marks on unfinished wood. I have used it stick down everything in my Farmhouse to protect it from my little boy knocking things over-- it really holds tight, even though the bond is not permanent. Just a firm wiggle undoes the bond, and you can stick it someplace else! It also dries clear so you can't even tell things are stuck in place.

Michelle Fox


Previous 10 | Next 10


Page 957 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)