Glue Sticks in Color: You can buy the glue for your mini glue guns in all different colors now. I got mine at a craft store in the Bay Area called Beverly's. I decided to dig out a package so I could tell you more. It is by Surebinder - 40 to the packet in multi colors including Neon plus Gold & Silver glitter. The mini sticks are 4" x 0.28" and you can buy them in round and oval, depending on what kind of glue gun you have. Makes wonderful icing on cup cakes so I bought several cheap mini glue guns at WalMart ($1.87 ea.) and keep one for each color of glue.

This is what it says on the back of the package:

FPC Corp.
355 Hollow Hill Drive
Wauconda IL 60084

Phone: (847) 487-4583
FAX: (847) 487-0174
e-mail: glueguns@aol.com

Sheena


Cutting small projects: If you don't have a jigsaw and don't want to invest in one, look for a coping saw or jeweler's saw. Coping saws should be available any place that sells tools - your local hardware store, Home Depot, Menard's, Sears..... Jeweler's saws are harder to find, but I'm sure MicroMark has them. It's the same principle - outline the window, drill the hole, detach the saw blade, put it through the hole you drilled....etc. But you supply the power.

Jeweler's saws are smaller, easier to handle, and come with finer blades, giving you a cleaner cut. The only problem with them its that sometimes the throat (the part that bends around in a square c shape and holds the blade at both ends) can be too small to take the piece of wood you want to cut.

Nancy Norris


Cutting small projects: not a coping saw, the blade teeth are too coarse for 1/4" scale work and will leave a very splintered and jagged edge in that scale. A jewelers saw is best and you can get very fine blades. Also, you have to buy blades by the dozen, as they do break easily, but they are inexpensive.

Jeanne, San Anselmo, CA


Cutting small projects: When I have to cut small pieces on my Dremel scroll saw, since the hole in the plate is too big, I take a piece of Plexiglass and cut a slot in it about half way through. Then I use two small clamps to hold it in place on the plate. This allows me to make these small cuts without losing the piece into the saw. You can get a small piece of Plexiglass form any glass shops' scrap pile. Measure your saw table and ask them to cut a matching piece for you. It might cost you a couple of bucks, but it's well worth it.

Spencer


Saws: a jeweler’s saw is often cheaper and better if you get it from a jeweler’s supply house or get a fret saw with a deeper C from a tool supply shop.

June Simpson in London Ontario Canada


Dremel: "Does the work of a hundred elves"!!! Don't worry, once you have it in your hands, YOU'LL find a million things that you can do with it. i use mine as a drill, a saw (yes, you can even get mini circular saws for it), a drum sander, polisher, engraver, wire wheel....I could go on and on. Mine's indispensable! And you can get accessories for it at most larger craft and hardware stores as well as hobby shops. As a matter of fact, i just picked up a brochure that Dremel puts out. It has TONS of accessories in it. Plus, you can also view/purchase accessories through their web site: http://www.dremel.com.

Gerda


Dremel: You can do LOTS of different minis jobs with that new Dremel moto-tool.....did you get the variable speed model? Here are some of the jobs I do with mine: Sanding....just about everything, especially if you have the variable speed model. I've even used mine to sand the edges of my shingles (along the roof edges). Drilling....get yourself that awesome, adjustable chuck (Micro-Mark catalog, some of the hardware stores) and there's no drill bit too small that will fit. I use it to drill the holes in walls and ceilings for lighting. There are many different attachments which all have wonderful uses...router bits, polishing/grinding bits, and yes, I do allow dear hubby to sharpen his chain saw with the special tool made just for that - LOL! You can also use smaller screwdriver bits with that adjustable chuck, and do smaller jobs around the house. Dremel has a booklet titled "101 Uses for the Dremel Moto-Tool" - it sometimes comes with the moto-tool. If not, you can write or call Dremel for a copy.

Laura in OKC


Mini Iron: The item # on the iron is: #9266 and it is $24.99. They also sell a Teflon lined travel case for it. Keepsake Quilting, 1-800-865-9458, http://www.keepsakequilting.com

Marilyn of Michigan


Super Glue: Here's another tip for you about super glue. DON'T STORE IT WITH THE CAP ON!! Super glue isn't affected by "air" and won't dry out if you leave the cap off. On the contrary. Have you ever had a container of super glue, put the cap on, only to discover that the cap has managed to "glue" itself to the container and it's all encrusted? Well, that won't happen if you leave the cap OFF. If you're looking for a great source for super glue, contact Craft Supplies USA and ask for their catalog (the catalog is free and so is the phone call: (800) 551-8876. And tell them you're a miniaturist!! Craft Supplies USA has quite the selection of glues from water thin to syrup consistency for filling gaps. They also carry a hardener that quickly dries super glue with just a light spritz. Their catalog is also filled with wonderful items that are very useful for miniature makers, from abrasives to buffers, from glues to crushed stone.

Gerda


Crazy/Super Glue and Plastics: Yup, it will cloud plastics. Never use it to secure plastic dollhouse windows or you will be so sad. There are some epoxies that you can use to stick plastics and metal together that won't react, and I believe there is special "jewelry" glue that will affix plastic to metal but I haven't tried them.

Kim from Canada


Previous 10 | Next 10


Page 958 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)