Glue for beads: When gluing your beads to make the jars for the lady's vanity tray, try using 527 glue. It is a glue for jewelry and will not cloud the beads as super glue will. You can use 527 on crystal beads for chandeliers; works great as long as you leave it exposed for a while. In other words, don't close it up in a box for at least 24 hours and you will not have any problem with cloudiness. Nancye in Miami, FL |
Beginners Tool Kit: I would start with the basic tools. Good tweezers, scissors, exacto knife and blades, self healing cutting mat, alligator clips, assorted paint brushes, emery boards (or sandpaper) mechanical pencil, metal ruler. Then I would add the bigger tools. A Dremel tool, Miter cutter, a chopper, scroll saw, a metal gluing jig. As for supplies to have on hand, assortment of water based acrylic paint, 527 glue, Grrrip glue, Fabrictac, toothpicks, matboard (scraps from the local frame shop), dress pins, T-pins, wax paper, clay, oil based pastel chalk. I'm sure there are more but these things should help you with almost any project. As you work you will add things like, wood scraps, fabric, papers, ribbons, kits, pieces of things from discarded electrical objects, dried flowers and leaves and acorns, toys from the kids (whether they want to let you have them or not), legos, pieces broken jewelry, snippets of wire, and so many things you would normally toss in the trashcan but don't because you just may need it one day. And then one day you wake up and realize you need more space to keep all these little things in and you husband builds you a nice workshop in the back yard and it gets crammed full and and and Ok, I'll stop there. Hope this helps a little. I could go on and on but I won't. Have fun with this hobby cause it will grow on you faster than you though it would. Terri Young |
Beginners Tool Kit: A perfect "tool" might include a subscription to "Dollhouse Miniatures" if she doesn't already have one. I purchased a subscription a few months after discovering this hobby and don't know what I'd do without the magazine. I now look forward to getting it more than my "Men's Health" or "Sports Illustrated" magazines! Mark Hagen |
Beginners Tool Kit: there is a list of tools to have in your toolbox on the NAME site at miniatures.org These are very basic things to take with you to do projects at Houseparties. One really good thing would be a light weight toolbox to keep her tools where she can find them. Light weight is also important as toolboxes tend to get heavy after a while. Laura Sisson |
Beginners Tool Kit: I'd suggest one of the boxed sets of tools. It'll give you a good range of tools to get started with and is really handy to have a basic range of tools packaged together when you go to each other's houses to work, or to club or a workshop. Check out the Micromark site http://www.micromark.com/ click the big red, online ordering button then enter house tool set into the search field. Click on More Info to see a picture, and also below will be a list of similar sets. Choose one based on your budget, not the name. I have the shipbuilders set and I find all the tools valuable (but I bought it cheap at a model fair it cost me between US$15 - $20). Sandra in New Zealand |
Dremel cutoff wheels: I love the very thin Dremel cutoff wheels for cutting any metal or bolt up to 1/4". There is nothing else in my bag of tools that cuts small steel rod so easily without distortion. Wear eye protection. It will also cut needles and any hard wire. Use the cutoff wheel at high speed. BTW I have a notably large bag of tools. Pam & Pete Boorum |
Dremel Flex Shaft: when you use a flex shaft it can only handle gentle bends. The shaft must be able to turn freely and it can't work if you bend it too much. Turning it sideways may be too much. Try turning it on with the shaft fairly straight and gradually taking it to the angle you want to work with. That way you can tell when you bend it too much. It really is a great tool - don't give up on it! Jacqui in Hilo, HI |
Sanding Drums: If you find it very difficult to slip a sleeve over the sanding drum (barrel) of the Dremel; Rub some pencil graphite on the drum and then use the eraser end of a pencil to push the rubber drum into the sanding ring. DrBob...Delray Beach, FL. |
Glue for Perfume Bottles: In the JAF findings catalog it is stated that Super Glues will cloud glass beads and mirrors. They suggest you use a jewelry cement. I have had good success with E6000 and Bond 527. Louise Hendricks |
Glues: Now, I can't tell you much about craft glues, but I know about nail glue. There are hot glues and cool glues and one should never use a hot glue on the nails as it eats away at the natural nail. Nail glues should be cool, and I have used my thicker nail glue to do repairs and never had it cloud up on me, so that could be an alternative to super glue (hot) I haven't tried it, but thought I'd mention it. When I get glue on my skin (just about every day), I use straight acetone to remove it. It is what I use to remove artificial nails with. I also sometimes use an emery board to sand it off (carefully). Emery boards also make good sanders for getting into small places also. Billie |
| Previous 10 | Next 10 Page 959 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |