Digital cameras: I just had to jump in on the digital camera discussion.  A week before  Christmas I took the plunge and bought one, a Nikon Coolpix 950.  Yes, I did the research -- I needed excellent quality and the ability to do extreme close-ups.  What it finally came down to was that I brought one of my quarter-scale dolls (carried by Shoestring Miniatures ) in to my neighbourhood camera store and said, "I have to be able to photograph this!"  The fellow laughed and said, "Show me something SMALL!" I can get within an inch of the subject with the camera, love the quality and the settings for different light.  The controls did take some figuring out but I just sat down with the instructions and tried things.

I must say, though, that I was only concerned with web quality, not print out.  I have an excellent regular camera and lens for that work.  Yes, my cheap bone did cause me some pain when I bought it, but in the past, I have been notoriously 'thrifty' about equipment...and always wound up spending more later to upgrade!  My last thought is this:  How much in life truly brings you joy?  Showing and sharing miniatures means more to me than a closet full of beautiful clothes.

The "A Doll is Born" album was shot entirely with the Nikon.

Diana in Canada


Digital Cameras: D.H. and I bought a  "Fuji Finepix4700 zoom"  a few months ago. I am not  the world's best photographer, but even I can get really good pics from  this camera.

The storage facility is a "smartmedia" card, which is very quick and easy to down load. I am a computer moron, and even I can do it!! This camera has 4.7,000,000 pixels, and the picture quality is fabulous. It has a 3X optical zoom and macro facility.

Margaret Stockbridge, Yorkshire


Olympus D-490 zoom.  it uses the memory cards rather than floppies or memory sticks, and it was the best purchase I made in the camera world.  It has oodles of features, has a great zoom (6x) range, and was under 400 dollars US.

I could buy the special attachments to swap the memory cards between the camera and the PC, but reality for me is I use the serial cable.  why the serial cable that came with the camera?  well, first it is free.  second, I am very forgetful, and it would be my luck that the time the bear is standing at my front door is the time I forgot to put the memory card back into the camera.  with the serial cable the card is always in the camera and I don't forget.

I also bought a 64MB memory card for the thing.  it holds 296 pictures that are 1280 res, and I take it on my trips so I never need extra film.

I bought the Olympus because I could get it for 380$ at Costco. It was rated high for it's class, and was pretty goof proof.

Sudie Parker


Saws: Band saw: A table mounted or floor stand mounted power saw that has a circular "belt" type blade. Usually has a much larger throat depth for cutting thick stock than other saws. Mine cuts things up to 8" thick - great for cutting out full-sized duck decoy blanks. Smaller table top models are also available. The teeth always travel down towards the table. Blades vary in width from around 1/4" to maybe 3/8". The thinner ones are great for cutting curves, the thicker for cutting large stock. I use mine a lot. I have a full-sized model but for minis this would be over kill.

Jigsaw: A handheld power tool that has a reciprocating (up and down action) blade. Best for cutting curved lines in large sheets. Blades are made for many purposes such as metal, wood, plastic, etc. Some jigsaws have a scrolling feature that allows the blade to be turned separately from the saw itself. I use mine occasionally when cutting large pieces or weird things such as gourds.

Scroll Saw: A table or stand-mounted reciprocating saw. Unlike the jigsaw, your work moves on a table instead of moving the saw. Best saw for cutting curves - you can cut almost any intricate shape. Blades come in all gauges and with different teeth for different materials. Good saws come with variable speeds for different uses. Throat depth limits the size of the material you can cut. For very large sheets you'd have to use a jigsaw. However, this is one of the most versatile saws for miniaturists since we usually work with small things. It is safer to use than circular type saws, too. I use mine constantly. I have a Delta.

Circular Saw: A handheld power tool with a round blade, similar to a table saw blade. Best for cutting straight cuts when portability is needed. One of my least used tools.

Table Saw: A table mounted circular saw - the work moves over the surface of the table. Great for cutting straight cuts. You can also cut good angled cuts and even do some joinery type operations on it. It can do cross cuts and rips, but they can be awkward to use on real large material such as full sheets of plywood. I use mine for larger projects, not so much for minis.

Radial Arm Saw: You see these when you have stuff cut at a lumber yard. The work sits on a large frame and the circular saw is pulled over the work on guides. Best saw for cutting rips and long cuts. It's very accurate. Not really needed for minis. I don't have one because my other saws do the limited large work I need done.

There are lots of variations on these basic saw types. Anker saws that use a dremel tool are great for rips and crosscuts on very small pieces. Not practical for anything but minis but I love mine for mini furniture construction. MicroMark sells several brands of small saws that do the same basic jobs as the ones described above, but I have not personally used them. I had a dremel table saw once, but it was too big for some jobs and too small for others, so I got rid of it. I also had a dremel scroll saw but I wouldn't buy one unless it is the only kind you can afford. You get lots of vibration with it and not much power.

If I could only buy ONE power saw, I'd say go with the table scroll saw. You can cut almost any mini project on these. You may need a bit of practice and/or jigs to get straight lines, but you have more versatility with this one than any other saw.

SAW TIP for the day: When cutting out several of the same item (especially good for unusual shapes)rubber cement or spray adhesive several layers of wood together. When the items are cut, drop into rubber cement thinner (or pry apart carefully) to separate.

Bonnie Gibson in Tucson


My favorite tools and indispensable to me are my fine small tweezers, my 6" 1/2"scale cork back metal ruler and my Dean Jensen 1/4"scale cardboard ruler. Plus small sculpting tools I've made for sculpting my dolls.


I almost forgot another of my favorite tools - and since I haven't seen it mentioned yet I will add it to the list - sandbags. I keep a few cloth bags in various sizes filled with sand, just enough so they can be shaped around objects. I use them when gluing odd-shaped objects because they can be conformed to the shape, they don't leave marks, and they hold quite well. They are also great for gluing cup handles, etc. on ceramics. Plus, and best of all, they are free!

Jacqui in Hilo


I've been working with small scales for about fifteen years using a twelve inch metal cork-backed ruler. While browsing the counters at the Charlotte National I saw a six inch corked back ruler. What a blessing when it comes to doing straight cuts in these small sizes. Maybe this will help some new comer to this size and they won't wait so long to benefit from it.

Helen Borders


Saws: The big difference between a scroll saw and a band saw would be the fact that a band saw has a blade that is all one piece and makes a full circle like a rubber band. This doesn't allow for one to cut any inner spots with out cutting a path clear through to do so. With a scroll saw or jig saw one can drill a hole and then insert the blade and cut from the inside as well. My husband used his scroll saw extensively for fret work and miniatures. Band saw was for bird houses and bigger items. Circular saw or jig saw were for getting the wood small enough to get in the front door, table saw to cut into smaller pieces that could be stored in his work room. I am sure the table saw, jig saw and circular saw would be the ones to use for cutting out walls and large pieces to make the frame of a house.

Marlene H Smith


Glues

My 2 cents on glues ... I've narrowed down my collection to my favorite 5 (and the list DOESN'T include Quick Grab ... hate the stuff!) I've been a woodworker all my life, so here's my scoop:

1) Wood glue. Really more versatile than the name implies. I bought a huge bottle of Elmer's Pro Bond (more viscose than carpenter's wood glue) and has great "tack" power. I use it for exterior construction, interior moldings and even to attach roof shingles.

2) The ubiquitous Aleene's Tacky Glue. Works on everything from paper to light wood.

3) Epoxy. Right, that 2-part smelly stuff. Boy does it work wonders glueing light metal parts together. But remember the mantra, clamp, clamp, clamp!

4) Silicone. The best stuff for anything you might want to undo in the future. The owner of PJ's (our local minis store) uses it for setting in windows, stairs, exterior shutters and other components that might affect your ability to re-decorate in the future. But we don't ever do that, do we! LOL. Well, in my case, I just take a sledge hammer when I renovate! And last but not least,

5) Zap-A-Dap. It's like super glue, only better. I found some of the instructors at the roundtable workshops at National using it and it is fantastic.

Uh, oh ... forgot one more.

6) My newest toy ... Elmer's polyurethane glue. I've used it to secure pin hinges in doors, too.

Jan in Charlotte


Glue: My best glue is the Bond Instant Grrrip. I use this for everything and put my vast collection of glues in our groups "trash to treasures" box!!! BTW...this is Susan Sirkis's fabric glue! It doesn't leave a hard, stiff finish.

Jan Haring


Previous 10 | Next 10


Page 966 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)