Fabric Glue: All this talk of glues, and no one has mentioned Fabritac, I find it indispensable for gluing polyester fabric and trims as well as trims with metallic threads in them!

Alice Zinn


Wallpaper Glue: Yes paste (actually a bookbinders glue) is wonderful for wallpaper. Spread it on the back of you wallpaper, using an old credit card (do NOT thin it first, adding water defeats the NON-stretching qualities of the glue) just thick enough to make it look shiny. Then put the paper on the wall and smooth it out using another (or at least clean the same one first) card.

Instead of the credit card, we buy the auto body filler spreaders from the local auto parts store.

Tom Berkner


Yes Glue: Yes and "Grandma Stovers" are the same thing. It is what Brooke uses and I have had best luck with it by thinning it to the consistence of thick honey. Be sure when you brush it on your paper (I use one of those .68 throw away brushes about 1" wide but don't throw it away LOL) just brush up and down. The paper stretches when wet and if you go in all directions you will likely have ripples. This has been my experience and my good teacher teaches this. After paper is applied I use a brayer to smooth it down but also an old CC works.

I have even used Yes (Grandma Stovers) on places where my real wallpaper border stubbornly refused to stick..worked great! LOL When I use regular prepasted wallpaper I usually make a very thin mix of this and use it to wet the wallpaper then wait a couple minutes before putting it in. Has done a good job for me. I use more "real" wallpaper and parts thereof then "miniature" wallpaper.

Personal preference. If you look at the rooms I have done I think only 3 had miniature paper in them.

Ceilings I have found great textured paper at Home Depot...usually they will give you a large enough "sample" to do a ceiling...Have used textured art papers from art store and part of a roll of early 1900 paper we found in an old rental we bought. It is absolutely perfect! (Though have to handle with care until glue's in). Bet you all wanted to hear this.. LOL Anyhow this is my 2 cents worth!

Carpeting is from my "collection" of upholstery fabrics. Whenever I find a wonderful piece I buy a chunk and I think a textured or pattern carpet helps keep a room interesting. You can even combine them by cutting the center out of a square and inserting another piece in the "hole" trim in between with Bunka and around the outside with fringe or bunka and you have a wonderful "new" look

Anita McNary-Haynes


Dremel Tools: Dremel tools are alive and well and not hard to use. Dremel is the only rotary hand tool I will use, because they make a bunch of accessories for it that increase its usefulness quite a bit. None of the other ones will fit the accessories. Dremel is not hard to use, but you should practice on scrap wood a bit until you have a good idea what it will do under certain circumstances. For example, if you are using it freehand with a sanding drum, it can catch on the edge of the wood and throw your hand/tool off to the side. Not a big issue, you won't be hurt or anything, but it could grind a gouge in your work. So you need to know about these points.

Dremels are wonderful tools for miniaturists and for many other purposes as well. If you are going to get one, get one with the flex shaft attachment. You will like the flex attachment for fine work because it's the size of a fat pencil and much easier to control in REALLY tiny places. By itself, it costs about $25. It's a bargain(maybe $15 more) when purchased in the box because you get a lot more bits and pieces to play with. Go ahead and get one. You'll love it.

Jeanne, San Anselmo, CA


Dremel Tools: I have used several types of Dremel tools, including the flexible shaft models. I currently own 3 in different states of age, body style and condition. I have 2 old ones that fit my Anker cutoff and rip saws and I leave them in the saws most of the time. They are the old style with the straight cylindrical body. The new one I got from Sears (it is made by Dremel for them). The newest one has a chuck type adapter available that allows you to eliminate the use of collets and tightening wrenches.

I also have a Foredom tool. This is sort of like a flexible shaft on a Dremel tool but WAY better. The Foredom tool has much more power, speed, and versatility. You are able to select a hand piece that matches your needs, and it takes any Dremel accessory as well. I can work with one for hours on end without the fatigue and heat buildup I get with my Dremel. It is much more pricey, but definitely worth it if you spend a lot of time using one. I use mine for minis, carving wood, cutting stone, etc.

Bonnie Gibson in Tucson


Light Box: Use a Lite Bright box. I ripped the peg board off (actually it lifted out quite nicely, but is not as interesting as saying "ripped") and had hubby cut me a piece of Plexiglas the same size. It is proving to work extremely well and doesn't heat up and buckle out of shape.

Dahn


Super Glue: I just LOVE the brush on Super Glue, but if you use it, attach the base of the bottle to something, (I waxed in onto a square of cardboard) makes it much more stabile and keeps it from tipping over!

Alice Zinn


Liquid Nails: Liquid Nails is a great product. A lot of bird house builders use it to attach shingles. I find it messy to work with and too thick/stiff for assembling dollhouses. I like tighter joints.

Tom Berkner


Liquid Nails: I use a lot of 2" foam insulation board in my projects and Liquid Nails is what I use exclusively for gluing foam to foam and foam to wood. It's the best thing I've found to date for this kind of gluing, I don't use it for anything else since it's too messy.

Rik Pierce


Cutting Basswood: For a hand saw you should use one that's 54 teeth per inch, called a razor saw, makes a very smooth cut. I also suggest a wooden miter box. The metal ones will destroy the saw blade as you can't help raking the edges. I carry both. The miter box is maple with a replaceable strip in the bottom. The razor saw comes with a with handle, or just the blade is available, if you have the Xacto handle.

Ruth, Grass Valley, CA


Previous 10 | Next 10


Page 967 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)