Gluing to card stock: I worked in an advertising agency and we used to glue computer generated pieces to card stock. We used Spray Mount. It doesn't discolor the paper and a little goes a long way. One thing to consider though is that you need to do this spraying in a very well ventilated area or outside.

Kathy Dychton


Light Box: My son John suggested that I use one of the round plastic kitchen light fixtures. I bought a "big" one! He wired it to a cord for me and I now use it upside down on a table. Works great but it does get hot after a while, so I only turn it on when I am using it.

Joy in Midland, Ontario


Roto-Zip: I bought one for my husband so HE could cut out all my craft things and he really likes it. I tried it and it does take awhile to get used to it because it cuts really really easy. And another good thing about it is you really don't need to sand your project after you're finished.

Laurie M.


Gluing jig: Made my own. 1 foot square piece of scrap metal. Cover with plastic wrap so glue does not stick to metal. base. Assorted strong magnets both round and square cornered. I rub some candle wax on the part of the magnet that may come in contact with the glue so it will not get stuck. The magnets go on the fridge when not gluing my minis.

Bob...Delray Beach, FL


Marsha uses her heat tool in Fimo work; I use mine to dry paint on bits of paper, fabric, or plant life. Unlike a hairdryer, it doesn't produce a blast of moving air to send stuff in all directions. Useful.

Mary (Oregon)


Glue for Plastic: The only thing that I have found that will hold on the plastic or photo print bags is" Duro Quick Gel". It has to be "gel". But be careful, because it glues fingers much better than the plastic!

Mark and Sharon Stockton


Hinges: I use Roo Glue for Metal & Plastic for hinges. It doesn't run like super glue or string like epoxy. I sell Roo Glue or get from your favorite miniature shop.

Dean Jenson


Glue plastic box: In general, don't use any glue that has any odor. (Solvents have an odor, and that is what clouds the plastic) I would suggest Alenes Tacky--used sparingly, you could pop it off later for repairs or additions to the scene.

Dean Jenson


Cutting Shield: When I was in Walmart's quilt section, I found a plexiglass angle which is about 18" long and has a strip of adhesive down one side of it. It is designed to protect your fingers when you are using the rotary cutter. I cut mine into shorter lengths and put a 12" piece on an 18" metal corkbacked ruler, and the shorter piece I put on a 12" ruler.

Jean


Sander:  If you need a great "small" electric sander, for dollhouse, roombox etc. building try the Black & Decker "Mouse". It's a small hand size sander with a tip area for getting into small areas.

Joyce


Previous 10 | Next 10


Page 968 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)