Sanders: I am not directly familiar with the Jarmac sander, but the company has a good reputation for quality. I have the latest model Dremel disk/belt sander and have found that it is a very good tool. There is an almost identical one from Delta and it is also a reliable tool. I believe that Sears has a model that is very similar to the Dremel tool. Garry Cosine |
Cleaning Oil-Based Stain from Brushes: There is no reason to throw away your brushes after using them with an oil-based stain. You can clean them for future use with a brush cleaner or just good ole turpentine. Either should be available at your local hardware or home improvement store. Lloyd Cooper |
Sanders: The 4" Jarmac sander is quite durable. A friend and I have used hers hard for over 15 years, and it is still going strong. Hers is the early model that did not tilt, but I am sure they are still very durable. Barb Jones |
Those formica cutouts from sinks can be used to mount bench power tools for ease of moving around and/or storage if you have limited space for setting up. DH made some for mine, table saw, 1"belt sander, drill press, old Dremel lathe etc... Cathy Bowen |
Cleaning Brushes: To clean oil-based paint, etc., from brushes, you can use Murphy's Oil Soap - no strong odor and it keeps the brushes soft. I also put a little Murphy's in with my water for regular brush cleaning. Carole Pierce |
Grandmother Stover's Glue: Bought some of this over a year ago and just did use it as wallpaper paste. It worked beautifully, in caseanyone needed to know this! Theresa Thomas |
Glue: The only drawback to Elmer's carpenters glue is that it is a penetrating glue. Therefore, if you are not careful to remove any excess "immediately" , it will show when you apply your finish. Then it is sandpaper and a lot of elbow grease! : ) But we think it provides the strongest bond for wood pieces. Sharon |
Dollhouse Assembly: I'm on my 2nd house at the moment. For the first, I used tacky glue with absolutely no problems. The second doll house was of quite different construction, and required a lot of extra strength at the joints, so I'm using hot glue on it. Dry fit your pieces together, and see which type of glue works best for you and for the house you're working on. Maggie Dickens |
Glue & Stain: I stain before I glue. HOM does make the tinted glue and I've used it but I found that it's too thick. Carol |
Glue & Stain: I always stain before I glue. Unless you really saturate the pieces you shouldn't have a problem with fit. Make sure everything is very dry before you assemble it. I also don't like the colored glues because I can never seem to get a color that matches the stain close enough to make me happy. Suzi |
| Previous 10 | Next 10 Page 978 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |