Hot Glue: If you need extra strength, hot glue won’t give it to you. On the contrary, hot glue tends to sit on top of what you are gluing and doesn't get down in the pores of the object glued. For extra strength, consider using a good, yellow carpenter's glue. There is a time and a place for a glue gun, but constructing a dollhouse isn't on the list except for shingles maybe. Even with them, hot glue can loosen and fail over time. GJ's uses hot glue for assembling Christmas trees. That glue gets nice and hot and stringy, but usually hot glue doesn't get hot enough to work that well. It cools off so fast that you're basically using warm glue and it globs on what you're building. In dry climates, especially, it means that you can end up with a pile of wood that's falling apart. Wayne Lasch taught us about Franklin's Titebond, a yellow glue that is really super.

Dottie


Dremel: I use the cut-off wheel to make slots in wood or to cut metal. I used it recently to slice some dowels to make cans. I fasten the dowel in a vise and just slice away.

Alberta


Photographing Mirrors: I watched a photography session a number of years ago at Kalmbach Publishing Co. (Nutshell News/Dollhouse Miniatures magazines). When photographing a scene with a mirror in it, they first used a squirt of dulling spray on the mirror. Krylon makes it (#1310) and it can be found at a craft store or wherever artists' supplies are found. The spray is temporary, and the label says it can be wiped off with a damp sponge or rubbing alcohol, if necessary.

Marilyn - Wisconsin


Dremel: I use it for all kinds of things from sanding to trimming windows and shaping things

Dorothy


Metal Ruler with Slots: Micro Mark sells rulers that are straight and have slots for marking precisely with your pencil.They're on Pg.45 of the winter catalog, pricey but well worth every penny IMO

Rose Stout


On Wallpaper pastes, I agree with Tom 100% when it comes to YES/Grandmother Stover's brand: do NOT dilute it. But I do use a LIGHTLY dampened sponge to spread it on the papers.

Laura in OKC


Wallpaper paste: Someone suggested using YES/Grandmother's glue.  This is what Brooke Tucker uses.  However, she recommends diluting it with water and if it's good enough for her, it's good enough for me.  I also have used regular wallpaper paste with no ill effects on the tape wiring or anything else after many years.

Jeanette Zanio


DREMEL ROUTER TABLE: I have the new one and also the old one.  I like the old one better but it won't fit the new Dremel tools.  It is best to use the heavy duty Moto Tool in them as it is very hard on the bearings. I find it very awkward to change Moto Tools each time so I leave it in permanently. The tables come with a template to make a table to mount the table into.  Just build a nice box with a smooth top surface. I use MDO (medium density overlay)  It is a plywood with a craft paper surface. This box is open at the back and front so I have access to adjust height and replace the router bit.  It is great for making moldings.

BILL ROBERTSON- FRET SAWS:Yes,Bill uses the fret saw a lot.  I (Renee too) took his Chippendale shelf class a couple of years ago. We got good exposure to the Jewelers' saw there.  It is probably my most used tool in my studio.  I keep several hanging over the bench pin or small vise with different blades in each.  I prefer it over either of my scroll saws. It is the tool I used to carve all the metal work for the Cinderella carriage. The more you use them the easier they are to use.

Bill Hudson


Re: diluting glue: This was true, but the last few bottles of "Grandma Stovers" I bought was already thinned a lot so be careful not to overdo it. Check it first. I was use to the thick stuff and added water before I realized it is now thinner. Thought it might be a fluke but the other bottle(new) was also thin. It should be about the consistency of thick syrup for regular wallpaper, but for pre-pasted thin it more as the paste on the back of the wall paper absorb a lot(especially if it is full size wall paper which I generally use).

Anita McNary-Haynes


Dremel Tool: I recently purchased a Sears Variable Speed Rotary Tool, which is their version of the Dremel Rotary tool.  Other then using it for sanding, I have been lost.  I just discovered that Dremel has an Internet site - www.dremel.com with a section of woodworking projects and directions.  It has been helpful for me in trying to learn what I can do with it. Dremel also has a book called "175+ Uses".  I called Dremel (800-437-3635) to find out about purchasing one and they are sending me a free copy!

Susan Crawford


Previous 10 | Next 10


Page 980 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)