Dremel Accessories: Widget Supply carries a great bunch of Dremel accessories and other tools. I ordered diamond burrs, teensy drill bits, brass brushes, and sanding & cutting disks last Sunday; they arrived on Wednesday! Great prices, too! http://www.widgetsupply.com/index.html Lee Menconi |
Mitre tool: I have used my mitre tool for several years now with no problem. I never use soft wood (Pine or Bass wood) the wood will crimp when cut. Using hard woods for furniture, window frames, doors , etc. you will never have any trouble. The first time I used mine it did the same thing. I returned it and they told me about soft woods. Try it and you will see the difference. Dan & Jane |
Yes Glue: For those that use Yes glue, instead of thinning it with water, you can zap it in the microwave for a few seconds and it softens it. Zap longer and you get liquid. Fannye |
Hand-held Mitre Cutters: I never use soft wood (Pine or Bass wood). The wood will crimp when cut. Using hard woods for furniture, window frames, doors , etc. you will never have any trouble. Dan & Jane |
Dobson Miter Rite: I have the Dobson and yes it does make extremely fine cuts as was mentioned before, but unless you're doing a lot of odd angles--like 22-1/2 or 65,--save your money for something else. As you noticed there is no way provided to cut two things the same, you have to make something up yourself and hope it doesn't move while you saw. Mine has been gathering dust for several years. Have you tried clamping a stop block inside your mitre box after you cut the first piece? A tool you might find useful is the true sander, also sold by MicroMark. It's very useful for ensuring two pieces of wood are the same size. Rose Stout |
Hide glue: You can get liquid or solid hide glue at most woodworking specialty stores. It is made from animal hides. Solid hide glue is heated in a special pot and should be thrown out daily. Liquid hide glue is manufactured by Franklin and is often used where a slow set is desirable. Both are made from animal hides and hot hide glue was used on furniture for centuries before stronger, easier to use glues were invented. I have never used it for miniatures. To acquire try http://www.rockler.com or call Woodworkers Supply 800-645-9292 for a catalog. These are both excellent companies. Pam & Pete Boorum |
Blade Covers: Another use for those cylindrical pencil sponges that come three to a pack is to slip them over the blades of your Xacto knives when not in use. They are available in office supply stores such as Office Max and Office Depot. Jeanette Zanio |
Roo Glue: Dean Jensen of Rainbow Design (rainbowdj@aol.com) has Roo Glue, both kinds, in fact - the wood glue, and another for non-porous materials. It's good stuff. No web site so far as I know, but you can e-mail him. Mary |
Xacto "cases": Find someone who smokes cigars. The "tubes" those come in work wonderfully for storing your Xacto in your tool box. Jo A Cohrs |
Precautions: Whenever possible, when using a Dremel, four things to remember: First, try to work with both hands making contact somewhere. In other words, brace your hands together with the workpiece in between, and you can avoid some wild jumps and slips. For instance, I often hold the workpiece in my left hand, working with my right on the piece. My right thumb is extended out and pressing on the back of my left thumb, which is holding the workpiece. This serves as a smooth pivoting point and as a bracing mechanism to help with a less shaky cuts as well as add strength and leverage to our control of the machine, and keeps the pink finger bits away from the cutting edge. Secondly, when cutting near the upper or furtherest edge (away from you), you should stop before getting to that edge. As you may have already noticed, the cutter can often grab that edge and literally drag your hand around and under the workpiece. This results sometimes in serious damage to the pink finger bits that are holding the underside of the workpiece. It's absolutely the best idea to turn the workpiece around so that you can address the work at the edge by pulling the Dremel toward you. This also reduces damage to the edge because you have more control. Third, if working on wood, most cutters should be worked at high speed. Crank up the speed to about 3/4 speed or soĽno need in going all the way up, but halfway is a bit slow. You have more control over the tool at those speeds with cutting tools. However, not so fast with the sanders. These would just burn the wood. If working on metal, bone, etc., each has an optimum speed to work with. Know your materials. And finally, this caveat: The tan to brown stuff with the distinct grain and hardness, is the wood. The soft pink to brown stuff with no grain but sometimes a bit of hair, are your fingers. Don't cut the pink stuff. Dave Pierce |
| Previous 10 | Next 10 Page 981 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |