If I could only have one saw it would be a band saw. I love its smooth cuts and make lots of furniture with it. Micromart has a really nice one in its new catalog for not much more than a good scroll saw.

Sue Thwaite


Cutting Plexiglass: I have always used a power saw for this - either a band saw or a jig saw. You have to remove the 'fuzz' from the edge, but it comes off without even using sandpaper. There are folks who score it - with an X-acto knife, I guess - and then snap it along a straight edge, but since I have the saw I go ahead and use it, as it is quick and easy.

Dani Rice


Cutting Plexiglass: cut plexiglass using one of two tools: Use a corkbacked ruler and
1) a sharp exacto knife or
2) an inexpensive plexiglass cutter purchased in the hardware store

The method is the same.  Score the plexi on several passes, cutting deeper with each pass until you are about half way through.  Then break the plexi on the line by placing the cut line on the edge of a table, and pressing down on the plexi until it snaps.  It takes some pressure, but if it doesn't break with reasonable force, score some more!

Roz Weitzman


Cat's Whiskers Paint Brushes: Seriously.   Cats shed their whiskers just as they moult the rest of their fur.  Any shed whiskers I notice lying around when doing the housework (NB if done rarely enough this becomes an intriguing experience as opposed to a bore), I collect and keep in a box. Whiskers become the finest paintbrush you will ever have, excellent for mini painting on ceramics, pictures, bird's eggs, toys etc etc, when the finest detail is required.

Never remove one before it's ready to fall.  Cats use their whiskers to navigate the world, and are lost without them.

Helen Cottrell


Hemostats - long skinny clamps with handles like a pair of scissors - are also very useful for turning doll sleeves or placing objects into a room without knocking over everything else. Sometimes, factory seconds can be purchased for a few dollars. The nice long wooden handles in cotton swabs are good for curtain and closet rods, too.

Dani Rice


Scroll Saws: After burning out two Dremel saws, I turned to a Delta scroll saw purchased at Home Depot. With the Delta, you can get a spiral saw blade that permits cutting in all directions.

Olivia


Rulers: MicroMark has several rulers with the slots that you can place your pencil in for exact measurements. Go to their web site at http://www.micromark.com and order their catalog online, or order direct from the web.

Also, a quick way to measure 1/12 scale, get a ruler with pica markings. One "line" equals one inch. Any place with supplies for printers has them, as this is a printer's measure.

Olivia


Mitre / Miter Cutters: Brooke Tucker recommends a hand held mitre cutter. I purchased the German made one and it is pricey and so are the replacement blades but what a wonderful tool! Since then I've found you can get one that is just as good and A LOT less money and the replacement blades are a 1/4 the cost of the German one and YES, the quality is the same. You can get them from Lee Valley tools. They have a web site. I think it's www.leevalley.com - just request their hand held mitre cutter. They have free catalogues too and are well known throughout Canada for quality. They ship internationally also.

Debi


Hand Held Mitre Cutters: squashing wood - Is your blade dull perhaps? Mine cuts neatly and finely. If you are cutting a piece that has a lip on it - like picture molding - you need to put a small piece of wood the same size as the cut out bit, under it to support it when you cut. That way it doesn't crush or break off.

Debi


Foamcore and Rubber Cement: Don't ever use rubber cement with foam core. The fumes deteriorate the foam interior. I glued, with rubber cement, some reproductions of art work to foam core and then stacked about 30 large pictures together. The foam reduced half in size on most of the boards just from the fumes.

Mary Ann


Previous 10 | Next 10


Page 984 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)