Digital Cameras: We bought an Olympus D 400 Zoom a year or so ago. It is a 1.3 megapixel which is small compared to some of the new cameras that are up to 2-3 megapixels. The comparable camera currently on sale is D 460 Zoom, and my husband recently found it for sale on the web for $295. This camera is a reasonably small camera, much smaller than the Sony's that use the floppy disks. We have 3 sets of rechargeable batteries and a recharger. So, we have a set in the camera, a set in the camera bag, and a set in the charger. The Olympus uses a memory card and we do have the reader attached to the computer because it is so much faster to transfer pictures than using the memory card adapter that fits in the floppy drive. I transfer my pictures to the hard drive to edit them because it is much faster to work from the hard drive. My husband "invented" a little tripod for me to use inside my dollhouse so I can take a time exposure and not have the flash reflection and flash shadowing in the pictures. It holds the camera steady for the time exposure. I have taken a lot of the pictures the regular way using the flash too. In the quot;macro" mode, you can put your camera lens about 10" away from the item you want to take, but then you can zoom in, so this gets you really close. You can take a look at the pictures of my dollhouse http://fayzerplace.homestead.com Go to "my minis" then "dollhouse" and see the results. I've been really pleased with the pictures, although I really wanted the Olympus 3030, but the price was much better on the one we bought. Fay in St. Louis |
Lee Valley Mitre Cutters: Lee Valley Tools #25K09.01 Mitre Shears $17.50 Canadian (approximately 12.00 US) #25K09.21 Replacement Blade $4.50 (approximately $3.00 US) Information from Lee Valley Fine Woodworking Tools 1999/2000 Catalog Pg. 206 www.leevalley.com Debi Kolenchuk |
Mitering: There have been a number of posts about the use of the tool called Miter Master. This is an excellent tool for certain uses. If you are shingling a miniature house and need to many shingles at an angle to fit in the valley of intersecting roofs, this tool will save a lot of time and do a very good job. Garry Cosine |
Natural Light for Digital Photos: I've had good results with the Ott Light sold in many office supply stores. Also, lately some health food stores have begun to carry the "natural spectrum" light bulbs that go into any regular light socket. A friend of mine said some WalMarts also carry this type of light bulb in the gardening section. I get the best results by using the natural spectrum light and no flash. It seems to produce a good digital photo that shows the true colors in close-ups of minis. The photos have much more accurate color than regular home lights (fluorescent or incandescent) Wilma Kinder |
Close-up photos with a digital: Use a tripod or set the camera on the table to shoot. Tiny wavers make your shot worse. I also recommend natural light over flash for minis. Laurie Sisson |
Photographing a mirror: I hope there's a better way than what I'm going to tell you, as I would like to have an easier method. I use one of two ways. 1. Fake it. Take the picture head on and then play with it in Corel or program like it. 2. Take it at an angle. I place a white or gray piece of paper perpendicular to the mirror and then shoot the mirror at a slight angle so that it's reflecting the paper and not me. Carol |
Metric Measurements: I have this wonderful stainless steel ruler that is inches on one edge and metric on the other edge. On the back are conversion tables. This ruler comes in a 6" and 12" length and can be purchased rather inexpensively from the Micro-Mark catalog. I have no affiliation with them, but could probably take out stock for all that I've purchased there. Their web site is www.micromark.com. and just for grins and giggles, the item #'s are: 6" ruler #10114 and 12"ruler #10115. Judi |
To photograph mirrors "dead on," dull them with a matte spray or cover them with a grey paper cut to fit. Alice Zinn in Pt. St. Lucie, FL |
Sanding Disks: I replace sanding disks on the Dremel sander by using rubber cement. I've been doing this for 15 years and it hasn't been a problem. Fannye |
Jarmac Tilt Table Sander: I love mine- it is one of my favorite tools. The sanding discs have a peel off backing and are easily applied and removed. I get mine through Micro-Mart and have been using it for years. Sue Thwaite |
| Previous 10 | Next 10 Page 985 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |