Jarmac Sander: The thing I dislike about it is it turns too fast and can burn the wood if you are running fine paper. I run mine on an older Dremel speed control. It cuts down on the power but if you are careful it works fine. I have not had any problem with it leaving streaks on my wood. I move the wood being sanded, back and forth across the face of the disc as I sand it. If you glue on the disks as you are supposed to it is Heck To remove them. If you use the proper cement you can remove them with solvent. Automotive paint supply houses carry stick on disks for DA sanders which are easily removed. Bill Hudson |
Photographing stained glass mirror: In my experience, a big mistake people make in shooting stained glass is to use a flash. And of course, there is the mirror. You are on the right track doing it at an angle, and the stained glass needs to be backlit. I would try doing it outdoors where there is light coming through the glass, and shooting from an angle to avoid camera reflections in the glass. I have to brag that when I was in Israel and wanted to photograph the Chagall windows, I got beautiful shots. Most people were using flash from too great a distance, and if it worked, it would be a real miracle. Plus, they were asked not to use flash photography, and I felt that since they did it anyway, they deserved for it not to work. Jacqui in Hilo, HI |
Easy Sander From Scraps Of Wood: Make a small table, about 8" square from 3/4" plywood, MDF, or MDO (medium density overlay). Pick one edge and sand smooth and square. Glue and nail on a fence absolutely square 90 degrees, to this edge. Now take a piece of 2x2 (check for square) about 6" long. Glue medium grit sandpaper on one side and fine grit on the opposite side. This block with sandpaper slides against the front of the table. I like to put the paper just so it is slightly below the level of the table top. By placing the stick to be sanded square against the fence pushing it against the sanding block as it is moved, you can sand the end of the stick square and true. Buy good, small drafting triangles and use them to hold the wood at desired angles for miter sanding. Bill Hudson |
Dremel Bits: Ask your dentist for some old dental burrs. They work in the Dremel and you can drill the tiniest things. Alberta |
Ruler: I have found a ruler that has helped me tremendously with measuring, marking, etc. It's thin metal, and is bent in a right angle and there are *slits* for every single mark on the ruler where you can lay the ruler on your wood and mark with a thin lead pencil through the slit Mary Lynne |
Photographing Mirrors: Before digital imaging, photographs of mirrors were touched up by hand. There's no way to avoid unwanted reflections if you shoot straight on. I would suggest that you make a hole in a piece of foamcore or white card stock and put that in front of the camera so the lens peeks through the hole. Shine your lights on the card instead of at the mirror. This means the mirror will reflect nothing but white except for the black hole in the middle. Since you are using a non-digital camera, get your photos developed, scan the photo and then open the image in a program like PhotoShop or PhotoPaint and use the cloning tool to "erase" the black hole. If you can turn the mirror at an angle without distorting the design, then place the white surface to the side and still aim your lights at the card, again so the mirror reflects only white. I'm recommending the white solution instead of black because I'm imagining your mirror has lovely stained glass effects that wouldn't show up if the mirror was reflecting shades of black or gray. Sally Cook-Thomas |
Modern Porcelain Sink: - Model Builders Supply has a round vanity sink in white and clear (for you to paint) in 1:12 scale and a single or double kitchen sink in stainless steel and clear. They also have single and double kitchen sinks in 1:24 scale. Sharon in MN |
Camera Tips: I'm not an expert, but along time ago a friend's father gave me some tips. First I use a regular old fashioned 35mm camera with a standard lens. I use 200 speed film and I photograph outdoors. He told me to use the afternoon light [12:00]. So what I do is set up a box on a table, prop up grey paper as my background. I get as close as 12-18 inches and start shooting. Of course I keep my fingers crossed. This last time when I had my photos developed I also had a disc made. It was much easier putting photos up on my photo site. The disc came with complete instructions. Lorraine Scuderi |
Photographing things at 1/12th scale: Decide what size prints you are going to get when you have them developed (4 x6 or 3 x 5, etc). Lets pick the 3 x 5 for an example. On a plain blank wall place two pieces of masking tape, 5 feet apart horizontally (that's one on the left and one on the right). Tape your object to the wall or set it on a table next to the wall or somehow get it in the vicinity of the wall, between the two pieces of tape (you can place as many objects as you like - e.g. 3 or 4 pictures, and a couple of cereal boxes' maybe a book cover). Stand back a few feet from the wall. Look through the viewfinder in your camera. Move forward or backward (as necessary) until the two pieces of tape line up with the two edges of your viewfinder. Now take your picture. Have it developed and printed as 3" x 5". If you noticed the area on your wall that was 5 feet across, is now 5 inches across on your photo. This is a reduction of 1/12 or 1 foot now equals 1 inch. For 4 x 6 prints put the masking tape pieces 6 feet apart. Tom |
Miniaturizing Pictures: here is a simple (relatively) way to miniaturize your photos, book covers, anything you can tack flat. Start by knowing what size your photos will be (3x5 for example). Now make a background of a med. grey color that is the same dimension as your photo except for in feet rather than inches... If your photo will be 3x5 inches, your background must be 3 feet by 5 feet. You can tape together mat board sheets, for example, or use a large piece of fabric (avoid shiny stuff though) Mark out the dimensions with dark ink in rather heavy lines so you can see them through the lens. Now stick a bunch of photos, book covers, wedding invitations, diplomas, whatever in the marked out space (I just use blue tac), hang the background on the wall, and step back and compose your picture. Zoom in (or move back and forth) until the marked out area just fills the frame exactly. What was 3 feet long on the wall ends up being 3 inches long in the photo- perfect scale! The most difficult part is getting the entire area evenly lit. It is easiest to do this on an outside wall in diffused sunlight. Or try a diffuser on your flash, it works wonders (even a linen hankie over the flash helps diffuse the light so it is more even) Also, 3x5 feet is a lot of room, so you could cluster the items in the middle and focus the flash there, then it doesn't matter so much if the corners are dark. Once you have the photos developed, just cut the individual pictures out and use however you wish. Michelle A in Boston |
| Previous 10 | Next 10 Page 986 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |