Twelfth Scale Books: I am a full scale bookbinder and I make miniature books that are leather bound and readable so maybe I can help you. The first is more difficult, but you need to make a cutting board that fits inside the pages. I use a sheet of glass but it is not kind to your blade. (Edge the glass with masking tape to make it safer). Make a card template that will be the size of the 'window' you want to cut out. Put your "cutting mat" under a few pages and use your craft knife with a brand new blade and cut out your hole going through a few pages at a time. Repeat. You will find that no matter how careful you are, this will still end up a bit raggedy but you can then line the resultant hole with board of some sort and make a mini frame to create a finished "room box" inside your book pages. For twelfth scale books it depends on how much of a purist you are. You can make non opening books with foam core innards, gold the edges and cover with leather. Use a gold pen to mark the spine. Or gold letraset. Or you can cut up checkbook stubs to use as your text block. Or you can make the books properly bound and readable Barbara B in South Africa |
Photo background: I use a tablecloth as a backdrop for my pictures. I can lay it across the dining room table and drape it over the back of the chairs for dolls (always assuming I can FIND the table surface, of course!) and put it on the sofa or a card table and get the DH to hold it up in the air for larger things. A dull finish rather than a shiny one, and the cloth I use most often is light blue. Dani |
Photo background: I find that the color of the background in photographing your minis partly depends on the color of the piece you are photographing. Just make sure it is not shiny, and I prefer paper to fabric, generally, as it doesn't wrinkle causing shadows. My color of choice is usually pale blue. Alice Zinn |
Door-Hanging Beads: At garage sales, look for strings of those small plastic beads which can be cut without the beads falling off - the whole thing is somehow made of plastic. Then cut pieces the right length to fit and fill the opening. To hang them: take a plastic straw, cut it the width of the doorway, then slit along one side very carefully with a razor blade. Now slide the top bead of each strip into the slit so they form a "curtain". Glue straw across the top of the doorway. Ann in Thorold |
BEADED DOOR CURTAINS: I recently experimented with this idea (for a bathroom window) but decided I preferred a stained-glass panel. Glue two clip-on earring findings (Michaels etc. has them)to upper corners of door-frame for rod brackets, with hinge facing down toward the floor. [Pull off the rubber cushions and save to recycle as baby bottle nipples.] Paint a coffee stirrer gold or silver to match the earring findings; glue a medium bead to each end as a finial. Check the dollar stores for seed-bead necklaces and buy several in colors you like. Measure lengths you need and coat areas you'll cut with tacky glue to keep from unstringing. After glue dries, snip between glued beads. Lay coffee stirrer down and run a line of tacky glue along it, leaving about 1/4" at ends to fit into earring findings. Glue bead strings to coffee stirrer. Let dry, and insert into findings. Voila, a beaded curtain. Loretta |
Photo background: I'm in favor of a paper background. Since our photos are such close-ups, the weave of the cloth always shows. I've had good luck with parchment style printer paper. The pattern is interesting without being too distracting. BTW, I'd not recommend white. It sometimes makes it hard to get correct readings from your mini piece. Mindy Skelton |
Photo background: Regarding the query about what to place miniatures on for photos, we use pale blue or green paper for photographing our horses, a sheet underneath and a sheet propped against something behind. White gives off too much glare, but any pastel colour should be ok. It's amazing what you see in a photo that you never noticed when you were taking the photograph.....we've taken pix with leather straps caught up in the wrong place, or manes or tails looking scruffy or out of place! The camera shows it all up! Annie Logan |
Photo background: The nice thing is you have seen the best examples in miniature magazines and Photo albums. Which types of photos did you like best? The ones in a setting with a story line or the items on their own with penny to show size? Each has it's own reason to be photographed that way....what are you trying to tell people by taking this photo? I want to give you an idea of the size because it is so small and perfect....use an item everyone can relate to easily. I want people to see how I made all the pieces work together....setting details. Backgrounds: Fabric has a nap and even ironed out wrinkles often show....Best results from fabric...the back of my husband's wrinkle free light blue dress shirt. (no, I didn't cut it out, I left it on the hanger, draped out the tail and set up on that.) New favorite backgrounds: calendar photos that are no gloss. Even if the photo is too small you can take it to Kinko’s to get it resized. The photo I used for the Miss 4th of July doll had as many people asking about the background as the doll! Never use small stripes, it makes the camera go nuts. Any print will detract from your detail. Black absorbs your light. Something pale, like blue is good. I also use a piece of gaterboard with dollhouse wallpaper on it to pop behind a piece to give it a finished look. I like to set up the shoot on my desk, right in front of the window for natural light. TURN OFF OTHER LIGHTS. They will turn your film green or off color. Put your camera on a book or two to get the height right or use a tripod...never hold it with miniatures Laurie Sisson |
BASKETS - Faking It: Over the years several writers have described this easy basketmaking technique. No weaving, no sewing; you just wind glue-soaked string around a form. 1. Start by covering a suitable shape (e.g., a wood bead) tightly with plastic wrap, cinching it at one end with a wire twistem. 2. Find a cotton or rayon string, crochet thread, etc. that has a distinct "corded" look. (Has to be a fiber that glues well.)Cut a long piece of the string. Coat your thumb and forefinger with tacky glue and apply to a section of the string. 3. Shape this glue-soaked portion into a flat coil to apply to the bottom of the bead; then continue to add glue and wrap string closely up the sides of your form. Let dry (can hasten with dryer or in conventional oven). Uncinch the plastic wrap and pull it with the bead out of basket form. Make handle with braided string, heavier cord, etc.(just look at real-life styles for ideas). Paint as desired. For us no-talent types, the illusion is amazingly good! Note: The top of the basket can't curve inward or you won't be able to get the form out. Mary (Oregon) |
Baskets: Maybe this has been posted before, but an easy way to make baskets is with needlepoint canvas. Just decide on a basket shape (like a small medicine bottle). Wet the canvas so that it is soft and flexible. Form it around the bottle using your thumbs and fingers to smooth it around the bottle. Wrap with a rubber band and let dry. Once it dries it will take on the shape of the bottle (or whatever you wrap it around) remove it and cut around the top to make it even. You can use unraveled canvas threads glued around the top to finish it and also for handles. Parisa Javidi |
| Previous 10 | Next 10 Page 987 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |