Photo background: I bought gray, sage, and ecru yardage at the hobby shop. Backgrounds should be in a neutral color - you don't want them to compete with your work). Look for the tightest weave you can find (shooting in Macro mode with a digital camera will show the weave in a piece of fabric) The material should be washable because you will soil it in the oddest ways. (drool toothpaste as you study the effect you want to create for the mornings filming) Turn the hem and iron with ironing tape, wash and iron - don't starch, you want the fabric as soft as possible. At any hobby shop you can find small blocks of wood. Paint them, with acrylic craft paint in a color as close to the background fabric as possible. I use a two-step stepstool to set up a photo shoot. The fabric drapes over it, the blocks of wood assist in placing my item and viola! We're on our way. Check my website for the results. Becky |
Baskets: I usually use the same materials for mini baskets as I do for 'ordinary' baskets - reed, waxed linen, and honeysuckle vine. Just use the smallest sizes, and whittle stuff down if need be. If you're working with really tiny scale, waxed linen is great, because it not only comes in colors but the wax on it makes it kind of stick together and easy to work with and shape as you weave it. Reed comes from the rattan plant, and is what they use for rattan furniture and a lot of wicker basketry. I don't do a lot of wickerwork; most of my baskets are traditional Appalachian region styles, like ribbed egg baskets. Katie |
Cutting brass tube: We cut a lot of brass tube in my Guild School classes. There are two ways to do it that I like most. First is use a fine X-Acto saw and cut it in a miter box. It doesn't hurt the saw. I am still using the same saw blade I got in 1948. Of course I have bought many others but the old one still cuts nicely. Second method: ***Be very careful doing this one.*** Take an old X-Acto knife blade in a handle. Lay the tube on a flat surface. Place the cutting edge of the blade across the point where you want to cut the tube. Press down on the blade against the tub and with your other hand roll the tube forward and backward. The blade will work into the tube scoring it. If you have scored it deep enough you can now snap the tube in two at the score. This takes practice. At first you will probably run a threaded looking score line. This is happens because the blade is not square across the tube. Practice on dowel because it is also a good way to cut dowel. Bill Hudson |
Cutting tubing: I missed what kind of tubing someone asked about cutting. There is a tubing cutter on the market. It's made by K.S. Engineering. The number is KSE296 and it cuts tubing 1/16"-5/8" o.d. Retails for $3.95. Any dollhouse shop should be able to get it for you. I have one and it works great. If anyone wants one and can't get it contact me. Sandy |
Cutting brass tube: I use a very thin (.010" thick as I recall) abrasive wheel that is 4" in diameter. I put it in a 4" table saw and cut brass tube, rod, strips etc. Will also cut copper, aluminum, steel or most anything else. The wheels cost about $10.00 and should last for years. Tom Berkner |
My most used tool in minis is the old fashioned "stork scissors" that are available at sewing centers for embroidery, etc. They are so sharp and "pointy" that they work for almost everything. Val Foster |
Glue for Chrysnbon: Since there has been a bit of discussion about Chrysnbon lately, thought I'd mention the glue that I've been using to put their kits together. Paula Foerder |
Model Cement: Testors also makes a great Plastic Model Cement pen! :) You just depress the felt tip to start the cement flow. It works like a charm and is very tidy to use. I have glued things to my fingers before using it........lol! Leslie |
Re-sawing Wood: I presume you will be standing boards on edge and sawing them to get thinner thicknesses (now there's 2 technical words for you!!!). You will need a fence that is as high or nearly as high as the wood is on edge for really firm support, long enough to support the entire piece, and the fence should ride in the slot in the table for accuracy. Ideally its distance from the blade would be adjustable with a wing nut or something, so this would be at least a 2 piece jig. Attaching the wood to be cut to the jig is the rub. If you do it from the back of the jig into the wood to be cut, with screws, you will lose the depth of the screws, but that gives you some wood. Some kinds of double faced tape are strong enough to do routing, so I would think that might work. Ideally, of course, you would have a planer to do this thicknessing, but with the table saw you can do lots of other things as well. Barb Jones |
Digital Cameras and backing up files: Colin raised some good points about digital cameras and I'd like to add a couple of things. I use a Fuji floppy disk adapter for my memory card instead of having to use a cable to transfer my pictures from the camera to the computer. It's as convenient as having a floppy disk in the camera and since I have 2 computers, I don't have to move around a cable. One of the reasons I didn't choose the Sony Mavica was that the floppy wouldn't hold many photos and the memory card does. I don't like to have a lot of unnecessary files on my hard drive because it slows down disk defrag and virus scans. I store any photos I might want to use in the future on one of those free webhosting sites such as Geocities or Fortune City. They do require that you have an actual webpage on their server and I make up one. Carol, S P Miniatures |
| Previous 10 | Next 10 Page 988 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |