Fireplace Construction: The fireplace in my log cabin was made from a base of old Styrofoam that I cut and glued together to form the shape and size I wanted. Then to the amusement of my neighbors, I went out to my driveway and gathered appropriate sized rocks.

I looked for ones that were somewhat flat. I glued them onto the base, pressing them into the Styrofoam so they were all somewhat level to each other. Then I mixed up a slurry of plaster of Paris with a touch of grey paint added in. I painted it all over the whole thing and worked it in good. When it was semi set up, I used damp paper towels to wipe the excess off the rocks. When it was dry, I used a candle to put a smoky soot coating inside the fireplace. I added a wooden mantle (I planned ahead and left the Styrofoam plain there.) I usually prefer to create something custom like this that fits my exact needs, and it's way cheaper when you use stuff you have already. This one cost me $0.00!

Bonnie


Sue Cook: I have a few Sue Cook pieces, including a fabulous fireplace, that I bought in England and thought other people in this group might like to have Sue's address. Here it is:

Sue Cook
Unit 5, Arundel Mews
Arundel Place
Brighton, England BN2 1GD
Telephone and 24 hour fax: 01273 6030554
Catalog: 5 first class stamps (UK) or IRCs.

Cheryl Kerfoot


Plates: I make paper plates out of circles cut from 140 LB hot presses watercolor paper. Cut the circles to the size that you want your plate to be. Find something solid and round to use to make the well in the plate. I have a brass spitoon that is just the right size. I put the round circle on a relatively soft mouse pad, center the spitoon on the paper and press down hard. This makes a nice well and pushes up the edges of the plate. Then I give the plate a couple of coats of fingernail polish on both sides, in the color of choice. When dry, decorate with gold, silver, or whatever color ink. I haven't tried to put decals on but it should work.

Mary Lou in Portage, IN


Sue Cook: Sue Cook is online - go to http://www.dollshouseworld.com/adlinks/suecook/index.htm

Lynne Payne


Hinges: Position first side of the hinge in the usual way and glue in place using a small amount of gel superglue (CA glue), making sure that you keep it away from the hinge join.  With a very fine drill, make pilot holes for the nails through the holes in the hinge.  Pick up a nail with forceps and dip it into the superglue and insert it into the hole, pushing firmly into place.  Repeat with the other nails, and allow to dry.  Then, using a needle file or something similar, file off the domed tops of the nails so there is just a thin sliver of metal left. Repeat this whole procedure with the other half of the hinge. I have fixed furniture doors box lids and room doors in this way, and they have held in place well, and the doors have stayed shut.

Ronnie


Architectural Etc. makes nice quoins in 1/12 scales. They come in stone and block looks. You can also get extra pieces to fill in if the corner piece is not long enough. If you can't find them at your local miniature shop, I carry them in my shop.

Deanna Spanjar


Hinges: before installing the hinges cut out a thin piece of wood from the door edge and frame which matches the size of the hinge, then install using superglue and nail heads. I usually do the door first, then work on the frame.

Judy


Chimney Finish: If your chimney is wooden, you can coat it with a fairly heavy coat of spackle, and before it dries, score it in a brick pattern using a used ball point pen, crochet hook or similar. Then when it's dry, use acrylics to color it however you wish. This worked well for me on my chimneys and also the front of my townhouse.

Linda


Ceiling Medallions: Full scale large doilies work great when layered in thickness for a decorative Victorian ceiling treatment. Glue several thicknesses of paper doilies on a piece of card stock. When dry, trim the excess card stock away  and paint to match your ceiling. For more dramatic effect, dry brush it with a slightly lighter color. Glue to ceiling!,/p>

Anne Gerdes


Chimney finishes: I had a quantity of real rocks - tiny ones that had been used in a 55-gallon aquarium. I scooped up a 5-gallon bucket of them and washed them silly. Then I got my chimney form and glue out and spent literally 2-3 days gluing each rock into just the right place. When dry, I got out grouting and gooped it on, making sure to fill in all cracks. (My advice is to do a small section at a time or you'll go crazy). Then before it dries, I grabbed a damp sponge and started "uncovering" the rocks until they looked the way they were supposed to. Needless to say, the water "melted" some of my glue and some of the rocks just fell off. This meant starting over at point one and re-gluing, etc. It also ate up 11 large sponges (rocks can do that) before I was done. And I will never tackle anything like that again without gloves!

But when all is said and done, I have a truly unique chimney which, if I had to price it based on work, etc, would be worth a small fortune! But it's all mine and looks great!

Jenny


Previous 10 | Next 10


Page 997 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)