Chimney Placement: I would notch out the roof line of the house and build the chimney on the outside of the house.

Rita S Pierce


Southwestern style: there are two main styles of windows and doors here in Santa Fe, both look beautiful with thick adobe walls. One is "Pueblo," with big square rough-cut wood beams exposed across the top of the doors and windows. and the plaster rolled right onto the edge of the wood, so that only a little of the casing shows. This type of door can just be a solid vertical plank with big iron strap hinges in the most primitive style. The windows are usually smaller and may not even open, just have glass.

The other style is "Territorial" in which Victorian-style windows and doors were inserted in existing adobe walls. This gives a very lovely effect. In this case the windows and doors are usually the vertically tall openings with Victorian moulding painted white.

One of the most important things to me about southwestern style is to have the walls appear very thick, at least a foot, and many old buildings have walls up to 3 feet thick. The depth of the casings is an important part of the effect, almost creating window seats inside.

The other wonderful thing about southwestern style is that doors (either Pueblo or Territorial) are often painted a turquoise blue. They often have carved designs in them, or cut-outs. A simple lace panel is frequently the only window treatment.

JJ


In the south, chimneys were often located on the outside of the house because of the warmer climate, and in the north inside the house to help with additional heat. You also have to consider the locations of fireplaces inside. If you want the chimney coming through part of the mansard, I think it would look more realistic to really have something coming through, not just stuck on. And you might want to add some copper flashing too!

Beth


A few years ago, one of my minis clubs decided to make our project a shopping mall. We all had to use the same basic size, shape, dimensions, etc. for our individual stores, so that they could be lined up as a mall for group exhibits.  We decided to use 12" x 15" CARDBOARD mailing boxes!   They were 10" tall, giving us a nice height, and made for good sized shops and restaurants.  We could do whatever we wanted - we had 2 restaurants - - one being an old-fashioned soda shoppe, and another being a BBQ place that the member had owned for many years.  We did all sorts of finishing to the exteriors - I applied brick to my garden center store; one was all stucco, another used clapboard siding.  These exteriors really strengthened the cardboard, and the boxes were terrific when completed.   We put alot more $4 into finishing them than buying the boxes - they cost each of us less than $2.

Laura


How to add interest to a slanted bathroom wall: I have no idea if I can explain this idea or not... but here's one way you can decorate the slanted wall.

Build a wall part way down the slanted wall. Build part way down the slanted wall and to the floor. Build  a cupboard into that wall. Ok.....are you with me? Now, wallpaper the ceiling and the slanted wall  using the same paper. Then paint the cupboard doors a contrasting color and the knobs on the doors could match the color of the wall paper. Now leave some of those cupboard doors open to reveal a storage area of toilet paper, towels, or whatever you think should be stored in the bathroom.

Viola Williams


Mission Tiles (Roof): Being "frugal" by nature, the mission tile on the roof is white styrene plastic tubing that is sliced in half the long way, and then sectioned off into tiles and painted.

Bonnie


Gargoyles: I purchased a small gargoyle at the IMA show in Chicago, from Scott Hughes of Scott's Lighting, HC73, Box 842, Cable, WI 54821. Also, I have a catalog from Design Toscano, www.designtoscano.com, and they have six mini gargoyles for sale, 3 1/2" high, which I don't believe would be out of scale on a large building, but might look too big if your structure was smaller.

Pat


I have similar ceilings in my current project. My bathroom   and the nursery have them. My solution: I am adding a dormer to each slant (visually balanced on both sides of the house). I bought them ready-made for about $11 each from Hobby Builder Supply. They are their largest ones. The toilet will fit inside the one in the bathroom, giving new meaning to the term 'headroom'! The sink and mirror will be on the straight wall.

Anne Gerdes


Curved Banister: I made a curved rail for a circular stars by taking very thin, about 1/32" thick, x as wide and as long as you want the rail and stacking them together with glue in between each one. Then take the glued together piece while STILL WET, and wrap around something that is the diameter that you want (perhaps a large soda bottle) and shape as you want it too look. Fasten with rubber bands and masking tape etc. Let dry. Hand sand the top edges along the top sides to have a curve over the edges.

Barbara Del Duco


Curved Banister: The owner of Molehill Miniatures says she carefully strips the plastic insulation off a 1/4" or 3/8" diameter electrical wire by running a sharp craft knife in a straight line down the length of the wire. This results in a slit, pliable tube. The slit lets you slip the tops of the posts into the channel, and you can finish off the ends with a bead finial or glue in a section of wire to form a scrolled end, then faux paint wood finish or whatever color you chose for the woodwork.

Loretta Sniarowski


Previous 10 | Next 10


Page 998 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)