my husband made me TWO chimneys for the house I am presently working on. You can see them on this page: http://gerdesdesign.com/newhouse2.htm We notched the roof edge.

Anne Gerdes


I want to make a gothic church with arches. I had thought of using very thin plywood and cut out one arch shape, use another layer cut out a few mm smaller and glue this behind and do the same with a third one - so I get some depth into the arch. On the last one (looking in from the outside that would be the inner one) I would then also cut some kind of rosette decoration. Now in real gothic arches on the arch itself there would be some kind of "ridges" that I don't know how to achieve.

Heike Boam


Paper Plates - How to make decals for paper plates: I shared this with my "crackers" swap group, and thought everyone else would like it to.

The plates were punched out on cardboard with a paper punch. I also punched out a plate of clear plastic and used it to find pictures in magazines and catalogs for the plates. Laying the plastic disk on different pictures to see what I think would be pleasing to see on a plate, I then trace around it. I then cut out the pictures I had traced. I then used two heavy coats of modge podge, letting it dry 24 hours between coats. When dry, I soaked the pictures in hot soapy water and very gently rubbed the paper off the back of the picture with my fingers. Then I laid the decals on a paper towel to dry. I then glued them to the paper plates. When these were dry, I put each plate into a top off the little plastic dome bubbles that you get out of the machines at the store, and used a wooden bead that I have on a stick to rub the plate to curl the edges slightly. Coat it with a few coats of acrylic high gloss varnish and the plate is finished.

Pat Thompson


Gothic Windows: I use bass wood which is easier to work with than plywood. Now for the little ridges just make a smaller piece in the same manner as the others( I've made them as narrow as 1/16th of an inch, that's about 2mm) then when you glue them together carve each layer lightly to round off the corners, this will give you a more finished look. also to save you from making a lot of windows you can make a silicon mold and cast all the windows you need from resin.

Rik Pierce


Slanted wall bathroom: Move the towel rack on the back wall to go between the toilet and the sink. Build shelving from top to bottom, side to side on the back wall. You could have towels, maybe a vase or shells, etc. on the shelving and on the top wall have an ivy spilling over and even having it come on to the slanted wall. On the slanted wall, use sponges and stencils to have ivy leaves to carry the color on. Over the tub have a small bracketed shelf to hold bubble bath, etc. and a towel rack.

Carol Jones


Columns: I used the largest size of cake pillars, then cut rectangular bases to make up the additional height. "Stuccoed" the whole assembly with Fleckstone, but could have antiqued the pillars and used faux brickwork on the bases if the house had been brick.

Loretta Sniarowski


Columns: I've used the heavy cardboard rolls that old fax machine paper use to come on. I think they are about 10.5 inches and if not could be built up on each end. I used some of the granite paint on them and they were very convincing on the front of this building.

Jane Ratcliffe


Tudor is also pretty crooked and off of plumb. I stayed in an authentic Tudor in England. The steps were so narrow and steep, we let the hosts carry our bags so we could hold onto the walls and steps to get to our room. The walls bulge inward at odd places and the great beams are random. You figure it isn't going to fall down NOW because it has been there so long already. Spackle is your friend.

Laurie Sisson


House Plans: May I suggest visiting DollHouseDesigns.COM at http://www.dollhousedesigns.com  and consider the Old Store. This PlanSet was designed for the beginning scratch builder (with the editing help of some members of the SS digest). It is a straight forward set of plans with step-by-step instructions to guide you through choices, selection, cutting, construction and assembly of all the pieces to build an old-fashioned store (or saloon or fire station -for our grandson - or what ever you want). The same construction techniques are used in all the other PlanSets.

Jon Lash


Spiral Staircase: This is what I do to make a spiral staircase: Draw a circle twice the width of your staircase. Divide it in the amount of steps required and cut out. Drill a hole in the pointed end of the steps and round off the point. Take a piece of wire and thread your steps, using spacers (wooden beads or pieces of dowel) in between. Fan out your steps till you are satisfied and glue everything together. You can glue a banister to the outside of every step and for the railing drape a piece of rope drenched in glue over the top and let dry. Finish as you please.

Dorothee, Katikati


Previous 10 | Next 10


Page 999 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)