Computers and The Internet Page: 4 |
What is a URL: Oh, please don't feel like you might sound stupid because of asking this question! We were all in the same situation at one time! To answer your first question, a URL is an acronym for Uniform Resource Locator, which is an address for a web site, such as: http://www.smallstuff-digest.com that's the URL for the SmallStuff digest's web site. If your are with AOL, then AOL refers to the URL as an "AOL keyword" At the "AOL's Go" prompt, you type in the keyword (or address) and you are transported to that site. Joy Perkins |
For copying and pasting (you wrote cut and paste), when you "cut" you're removing it, as is "cutting it out" so it's better to copy and paste. To copy and paste, you need to first select the text to be copied by positioning the mouse pointer at the beginning of the text you want to copy, then you need to highlight the text to be copied. You have 2 ways to do this: 1) click the mouse pointer over the portion of the text to be copied and make sure your mouse pointer is no longer an arrow but an "I" beam. Then hold down the Shift key *and at the same time* press the arrow key in the direction you want to highlight the text. The text will highlight. 2) The other method of selecting the text to be copied is to position the mouse pointer at the beginning of the text, then click and drag across the portion of text you want to copy. It should now be highlighted. You now have your text selected with either of those 2 methods. To copy the text, press Ctrl C by holding down the Ctrl key and pressing c at the same time. The text is placed in the memory of the computer. Then you open up your browser (Internet Explorer, Netscape or AOL's browser) and position your mouse pointer in the address location of the browser. Once positioned, press Ctrl V in the same method you used for the Ctrl C command. You should now have the "address" copied into the browser window. Once the address is there, press Enter and you will be transported to that web page. Hope all of this helps! Joy Perkins |
Blackberry portable internet device: - For AOL members, here is a URL to start with (I can't access the AOL members area to find the actual prices or info) - http://www.aol.com/anywhere/mobilecomm/index.html this is the AOL version - same product, AOL branding and access. - For purchasing information (US) try - For Canadian try For more info about accessing the Internet on it - try here: - I have the 950 - now warning - "surfing" the Internet does not mean pictures. It means data. And it doesn't work if the site is not accessible (not to strict HTML 4.0 standards - but more site owner awareness of errors and potential problems). What I adore about it though is, that as long as you are in a digital area, you get your email, you get access, you can write to people. For traveling - you lose access in areas without digital, but the email doesn't get lost, you catch it again when you get back in range. Noella |
AOL communicator: I checked out the device (blackberry) via AOL. Cost is about $330.00 + a monthly charge of $19.95. It is a wireless device. Works like a pager or digital phone. If you are out of range for the digital phone or this "blackberry" device you do not receive anything, nor do you lose anything. It is the size of a hand held pager (as it appears to me) so that if I intend to read mail it displays a few lines and you have to scroll. Since it does not display pictures but only data at this cost I personally would opt for a lap top. Yes it is more costly and bigger but I get EVERYTHING. This is my personal opinion. DrBob |
Email access when out of town: I have used Pocket Mail for about a year now when I am out of town, to receive messages. The unit is somewhere between $89 and $150 depending upon what you buy, the monthly service fee is $9.95. It relies on regular telephones to send and receive messages. I write a message on its screen (has a small keyboard), dial up an 800 number, hold the device to the telephone, and the message is sent and notice of any incoming emails comes in at the same time. I have to redial to request those messages, but it does work well, and does not rely on wireless digital, so it will work in the woods if there is a phone. There is also a free phone number for calling in Canada. The downside is its memory, which cannot accept something as large as a Small Stuff digest. Since finding that out the hard way I only give its address out to my family, show assistant, and others who might have an urgent need to get to me. It does regular email just fine. For more information on this method of communicating while at miniature shows go to http://www.pocketmail.com and go from there. Barb Jones |
Printing: I also have an HP printer Before I print I click on Preview. That will show you how much is on the page. I move all borders to within 1/2" of the edges of the paper. When you click on Print it will tell you that the printer is set outside the printable area, but so far I always tell it to go ahead and I've never lost anything. Also sometimes if you change the orientation of the sheet to be printed to Landscape instead of Portrait you can gain a little space. You do this by clicking on Print, Properties and then check the box for landscape. Fannye |
Printing: - I found that the recent pattern by Janet Granger was too wide, not too long, for my printer. Perhaps changing the setting to landscape would help but there was an instruction included as to how it could be reduced. I'm waiting for my son's visit this weekend to figure that one out for me and, of course, I will type out his instructions for future use. A lot of this stuff is "Greek" to me and I rely on my ever-growing "Bible" of computer tricks and tips. Jeanette in Wisconsin |
Refill Kits for Printers: I'm no expert here but it is my understanding that as long as our printers are under mfg. warranty, we do not want to use refills. To do so will negate our warranties. However, we have two printers that are no longer covered and use the refill kits on both. It is very satisfactory and saves a great deal of $$$$ especially on the color ink. I will add that the ink stains with dedicated vengeance. Be sure to wear gloves and protect your work surface with an old rag. I was NOT pleased when the red ink splattered on my new Berber carpet. DH was equally unhappy when he had to pay to have that portion of flooring replaced. So glad it was his error. Such occasions are wonderful ways to add a few points to the "Honey-Do" list. Becky Holliday |
Data Storage: DH suggests you store your info on CDs...if you take care of your CDs (no scratches, no high temps) they have an estimated life of 100 years...I don't think anyone knows if it will really last that long, but long enough for most purposes. You can get a CD burner rather inexpensively, and once it's set up, you just pick what you want to save and the CD burner does the rest! One time use blank CDs start at less than 50 cents on a spool of 50 to perhaps a $2 for a high end rewriteable CDs. That is to say, CDRs you can only write on once (like a sheet of paper) but CDRWs you can write and write over many, many times. Either will hold between 650-700 MB of information. The CD burner will cost you $100-$400 depending on if you can an internal basic version or an external fancy version. And as with the floppies, it never hurts to spend a bit more on brand name blank CDs - the ones with the blue reverse side are the most reliable (no joke!) Some CD writers are a little complicated to set up, but your son should be able to do it for you with no problem. If you get an external USB CD writer (a little more expensive), it should be very easy to set up..you just plug it in and install the software. Whui |
Bad Disks: Just a note on cd rw (using cd's like a floppy as some burners let you do) They have a limited shelf life too. (burned cds that you can't add to don't as long as you take care of them) After adding and subtracting so many times you can't burn to them any more...good news is that if you try to add something and the burner won't do it(and it is not a space issue) just transfer your stuff to the hard drive and burn it to a new cd. I learned this the hard way. Luckily I didn't lose data. Michelle |
Computer tips: I have an external hp CD-writer and I use Sony CD-R disks and after I write to it, I can use it in my other computer and rewrite on the disk again. There is an option, after writing to the disk to allow it to be read by another computer. It then goes through some process of "organizing" the files to be readable on another computer. The cd-burner would be totally useless to me if 1) it would only be readable in the computer where it was written to or 2) it could only be used once. Carol |
Computer disks: Having checked this out with DH, who has worked with computers for nigh on 40 years (since the days when one programmed mainframes by sticking bits of coloured wire into holes on a board), I am going to stick my neck out and disagree with those who've said they don't last. I've used disks for archiving for 15 years or so, and have had no trouble. One of my clients just did the third edit in eight years of a book I originally backed up on a disk, and the original disk is still fine. Like hard drives, how long they last depends more on how much they're used. I have had only 2 problems, in fact: one when I tried to use a disk from someone else's computer on mine, and it turned out her heads were just slightly out of alignment; and occasionally when I've used old disks which had been wiped and used several times. Don't buy 'seconds' (the 50 for $5 deals), and if a document is vital, make 2 back-up disks. I've never actually needed the second back-up; I keep these at DmiddleD's business in case of fire, flood or pestilence. Carol |
Printing: I also have an HP printer and the problem of pictures splitting between two pages. To avoid it I don't change any of my settings. I highlight (select) the picture(s) I want to print by holding and dragging the left clicker until the area is shaded, then release the clicker and from the "print" menu I choose "options." Under options you can designate how much of the document you want to print, and if you choose "selection," the only thing that prints is the picture(s) you highlighted. The highlighted selection is realigned for printing purposes only and comes out on the top of the page. Just be care not to highlight too many items at one time or you will end up with the same problem of splitting at the bottom. Char |
Printing: To fit your printables all on one page with a HP printer...click on Print and a box comes up with Properties on it. Click on Properties then under Set Up check off the box that says Scale to Fit. There are some other important features in there that you can play with too that can make quite a difference to the quality of your printing if you haven't tried them. Jean Day |
New place to post your mini sites: I have just posted my gourd web site with a new craft directory on the web. In corresponding with the owner of the site, I found that she is also looking for artisans in many other areas to add to her directory. If you have a web page featuring your miniatures, you may want to add your She has categories for lots of other crafts and hobbies, so as she grows you may find some helpful areas in miniatures and more. Bonnie Gibson - Tucson, Arizona |
Foreign letter characters on an English PC: For folks needing to print special foreign language characters, you can install foreign characters using your Windows 98 CD. Put your Win 98 CD in your drive. Go to start, settings, control panel, keyboard, select the language tab, click "add". Make sure you check the box that says "enable indicator on task bar", then choose the language keyboard you want to install, then let it install. It gives you a little icon in the lower right hand corner of your screen...for example, mine has English and French, so I have a little blue icon that says "En" and when I click on it, I can change it to "Fr". Then to find the "special characters" it's mostly trial and error because your keyboard will then respond like a German keyboard (or whatever language you chose), which means the characters printed on your keyboard do not correspond to what they will show. You can then find the characters by trial and error, look for a "keyboard template" online, or perhaps a nice SSer with a German keyboard can tell you where the "a" with 2 dots key is located. This will work for European languages. For Asian languages I believe an additional plug in required. If you only need one sign, you can also go to the "symbols" font in Word and you may find the specific sign you need. Hope that all makes sense! Whui |
Umlat: On my PC I can make an umlat (2 dots over a vowel) by pressing the quotation key and then the letter. I don't know why this is so. I found it out by accident. Try it and see if it works for you. June in London Ontario Canada |
Typing special characters: If you run Windows, you will have access to a thing called a character map. If you highlight a character on this map, it will show you the alt numbers to use in the bottom right corner. They don't always show up in emails or in .txt files, however. Kay in Ottawa, Canada |
| < Typing special characters: Hello saw an interest in this topic. Here is a link to typing those funny characters. Nursemini |
Free Web Space: I'm with Tripod--they're free, they give you a choice of pop-up or banner ads, you get 50MB of space, and they have a lot of 'helpers' and free web tools. Net colony is also becoming popular; I don't know the details, but they offer 100MB of free space. Most free spaces have, in their terms of service, a disturbing little paragraph that says they own the copyright to anything you put on your web page. I think this is some legal CYA thingie; but all you have to do is put "This web page, including all photos and text, is copyright 2001 by (your name)." Molly |
| This category has 279 tips of 10312 tips in the archives. Previous 20 | Next 20 Page 4 of 14. |
|
Browse the database (all entries) |